- 12 7月, 2016 2 次提交
-
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 11 7月, 2016 2 次提交
-
-
由 Fabian Freyer 提交于
First, remove escaped newlines and split up the string into an argv-list for the bhyve and loader commands, respectively. This is done by iterating over the string splitting it by newlines, and then re-iterating over each line, splitting it by spaces. Since this code reuses part of the code of qemu_parse_command.c (in bhyveCommandLine2argv), add the appropriate copyright notices. Signed-off-by: NFabian Freyer <fabian.freyer@physik.tu-berlin.de>
-
由 Fabian Freyer 提交于
Unconditionally use gnulib's getopt module. This is needed by the bhyve driver to provide a reentrant interface for getopt. Several gnulib headers rely on features.h being included by ctype.h to provide __GNUC_PREREQ, but on systems without glibc, this is not provided. In these cases __GNUC_PREREQ gets redefined to 0, which causes build errors from checks in src/internal.h. Therefore, define __GNUC_PREREQ as early as possible. config-post.h is probably the first header that is included, before any other headers.
-
- 01 7月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Pretending (partial) support for something we don't understand is risky. Reporting a failure is much better. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Daniel Veillard 提交于
* docs/news.html.in: update documentation * po/*.po*: regenerate
-
- 27 6月, 2016 1 次提交
-
-
由 Laine Stump 提交于
This patch splits virnetdev.[ch] into multiple files, with the new virnetdevip.[ch] containing all the functions related to setting and retrieving IP-related info for a device (both addresses and routes).
-
- 24 6月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Move to virsecret.c and rename to virSecretLookupParseSecret. Also convert to usage xmlNodePtr and virXMLPropString rather than virXPathString. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 14 6月, 2016 2 次提交
-
-
由 Jim Fehlig 提交于
Move capabilities code out of libxl_conf.{ch} and into new libxl_capabilities.{ch} files. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
The virQEMUDriverConfig object contains lists of loader:nvram pairs to advertise firmwares supported by by the driver, and qemu_conf.c contains code to populate the lists, all of which is useful for other drivers too. To avoid code duplication, introduce a virFirmware object to encapsulate firmware details and switch the qemu driver to use it. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 10 6月, 2016 2 次提交
-
-
由 Daniel P. Berrange 提交于
Move all APIs with a virHostMEM name prefix out into new util/virhostmem.h & util/virhostmem.c files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Move all APIs with a virHostCPU name prefix out into new util/virhostcpu.h & util/virhostcpu.c files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 6月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Move the module from qemu_command.c to a new module virqemu.c and rename the API to virQEMUBuildObjectCommandline. This API will then be shareable with qemu-img and the need to build a security object for luks support. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 03 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 16 5月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Call the internal driver callbacks rather than the public APIs to avoid calling unnecessarily the error dispatching code and don't overwrite the error messages provided by the APIs. They are good enough to describe which secret is missing either by UUID or the usage (basically name).
-
- 04 5月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 01 5月, 2016 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/news.html.in libvirt.spec.in: update for release * po/*.po* : regenerated
-
- 26 4月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add the functions to add/remove elements from the hashed secret obj list. These will replace secret_driver functions secretAssignDef and secretObjRemove. The virSecretObjListAddLocked will perform the necessary lookups and decide whether to replace an existing hash entry or create a new one. This includes setting up the configPath and base64Path as well as being able to support the caller's need to restore from a previous definition in case something goes wrong in the caller.
-
- 18 4月, 2016 2 次提交
-
-
由 Erik Skultety 提交于
New API to retrieve current server workerpool specs. Since it uses typed parameters, more specs to retrieve can be further included in the pool of supported ones. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
Otherwise 'Unknown' error will be returned to client. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 11 4月, 2016 1 次提交
-
-
由 Erik Skultety 提交于
Commit e72667bd tried to fix the incorrect file ordering in po/POTFILES.in except it didn't, since the sort was run using locale en_US instead of using locale C which is the default in libvirt. So this patch hopefully fixes it for good. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 10 4月, 2016 1 次提交
-
-
由 Erik Skultety 提交于
When it comes to a situation that a new translatable file needs to be added into the list of files, an automatically generated patch is proposed during syntax-check. However, the diff was made against a sorted list of files and the same sorted list of files + the new file that actually needs to be added into the list. Since we do not keep POTFILES sorted, the proposed patch thus can't be applied...most of the time - depending on the context. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 07 4月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Commit id 'fb2bd208' essentially copied the qemuGetSecretString creating an libxlGetSecretString. Rather than have multiple copies of the same code, create src/secret/secret_util.{c,h} files and place the common function in there. Modify the the build in order to build the module as a library which is then pulled in by both the qemu and libxl drivers for usage from both qemu_command.c and libxl_conf.c
-
- 06 4月, 2016 1 次提交
-
-
由 Daniel Veillard 提交于
- docs/news.html.in libvirt.spec.in: update for release - po/*.po*: regenerated
-
- 29 3月, 2016 1 次提交
-
-
由 Qiaowei Ren 提交于
This patch implement a set of interfaces for perf event. Based on these interfaces, we can implement internal driver API for perf, and get the results of perf conuter you care about. Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com> Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
-
- 19 3月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
These functions are going to be reused very shortly. So instead of duplicating the code, lets move them into utils module. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 16 3月, 2016 1 次提交
-
-
由 Erik Skultety 提交于
The problem with the original virLogParseOutputs method was that the way it parsed the input, walking the string char by char and using absolute jumps depending on the virLogDestination type, was rather complicated to read. This patch utilizes virStringSplit method twice, first time to filter out any spaces and split the input to individual log outputs and then for each individual output to tokenize it by to the parts according to our PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination was replaced with virDestinationTypeFromString call.
-
- 11 3月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
Since we have the opportunity now, let's save some precious code lines. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 01 3月, 2016 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/news.html.in libvirt.spec.in: update for release * po/*.po*: regenerated
-
- 17 2月, 2016 5 次提交
-
-
由 Erik Skultety 提交于
This API is merely a convenience API, i.e. when managing clients connected to daemon's servers, we should know (convenience) which server the specific client is connected to. This implies a client-side representation of a server along with a basic API to let the administrating client know what servers are actually available on the daemon. Signed-off-by: NErik Skultety <eskultet@redhat.com> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Erik Skultety 提交于
This change is merely because admin_server would contain all the code from dispatchers and helpers to the actual APIs. Admin should have similar structure to the daemon-side remote driver - dispatchers and helpers in a separate module, APIs in a separate module. Best viewed with -M. Signed-off-by: NErik Skultety <eskultet@redhat.com> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 John Ferlan 提交于
Create a new module qemu_alias.c to handle the qemuAssign*Alias* APIs and the qemuDomainDeviceAliasIndex
-
由 John Ferlan 提交于
Create new modules qemu_domain_address.c and qemu_domain_address.h to contain all the new functions and header data. Additionally move any supporting static functions. Make qemuDomainSupportsPCI non static. Also, move and rename the following: qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel qemuCollectPCIAddress to qemuDomainCollectPCIAddress qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3 qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Move the misplaced function from qemu_command.c to qemu_interface.c since it's closer in functionality there and had less to do with building the command line. Rename function to qemuInterfaceBridgeConnect and modify callers. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 11 2月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Extract out the qemuParseCommandLine{String|Pid} into their own separate module - taking with it all the various static functions. Causes a ripple effect with a few other modules to include the new qemu_parse_command.h. Narrowed down the list of #include's in the split out module to those that are necessary for build.
-
- 17 1月, 2016 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/news.html.in libvirt.spec.in: update for release * po/*.po*: regenerated
-
- 09 12月, 2015 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/news.html.in libvirt.spec.in: update for release * po/*.po*: regenerated
-
- 30 11月, 2015 3 次提交
-
-
由 Michal Privoznik 提交于
Our domain_conf.* files are big enough. Not only they contain XML parsing code, but they served as a storage of all functions whose name is virDomain prefixed. This is just wrong as it gathers not related functions (and modules) into one big file which is then harder to maintain. Split virDomainObjList module into a separate file called virdomainobjlist.[ch]. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Erik Skultety 提交于
Introduce a new API to get libvirt version. It is worth noting, that libvirt-admin and libvirt share the same version number. Unfortunately, our existing API isn't generic enough to be used with virAdmConnectPtr as well. Also this patch wires up this API to the virt-admin client as a generic cmdVersion command.
-
由 Erik Skultety 提交于
This patch introduces virt-admin client which is based on virsh client, but had to reimplement several methods to meet virt-admin specific needs or remove unnecessary virsh specific logic.
-