The device is still referenced from pcidevs and freeing it would leave
an invalid pointer there.

An attempt to attach device that is already attached to a domain results
in the following error:

virsh # attach-device rhel6 pci2 --persistent
error: Failed to attach device from pci2
error: invalid argument: device is already in the domain configuration

The "invalid argument" error code looks wrong, we usually use "operation
invalid" when the action cannot be done in current state.

https://bugzilla.redhat.com/show_bug.cgi?id=830201

In older Fedora, the spec file for libivrt depended on avahi, which
included avahi-daemon, which in turn depended on dbus.  But now that
avahi libs and avahi-daemon are (correctly) in separate pacakges,
and since we REALLY don't want a mandatory dependency on avahi-daemon,
and considering that our init scripts require the messagebus service
from dbus, we need to explicitly require dbus ourselves.

* libvirt.spec.in (Requires): Add dbus for libvirt-daemon.

https://bugzilla.redhat.com/show_bug.cgi?id=830201

The initscript and upstart services depend on dbus starting
before libvirtd.  When we first wrote the systemd script, we
tried to do the same, but we depended on dbus.target (which
does not exist) in comparison to network.target (which does
exist), so we removed that in commit 4c7973e1.  But we still
need dbus up and running first, especially now that we want
to support shutdown inhibition via dbus (whereas we originally
needed dbus only for firewall control).

http://www.freedesktop.org/software/systemd/man/systemd.target.html
explains how a target (such as network.target) is just a collection
of common services bundled together, and why we want network.target
but dbus.service.

* daemon/libvirtd.service.in (Unit): Depend on dbus starting
first.

"disk" is initialized to "dev->data.disk" in the beginning of the
function.

Pushed under trivial rule.

Only one error in qemu_monitor was already using the relatively
new OPERATION_UNSUPPORTED error, even though it is a better fit
for all of the messages related to options that are unsupported
due to the version of qemu in use rather than due to a user's
XML or .conf file choice.  Suggested by Osier Yang.

* src/qemu/qemu_monitor.c (qemuMonitorSendFileHandle)
(qemuMonitorAddHostNetwork, qemuMonitorRemoveHostNetwork)
(qemuMonitorAttachDrive, qemuMonitorDiskSnapshot)
(qemuMonitorDriveMirror, qemuMonitorTransaction)
(qemuMonitorBlockCommit, qemuMonitorDrivePivot)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup)
(qemuMonitorGetVersion, qemuMonitorGetMachines)
(qemuMonitorGetCPUDefinitions, qemuMonitorGetCommands)
(qemuMonitorGetEvents, qemuMonitorGetKVMState)
(qemuMonitorGetObjectTypes, qemuMonitorGetObjectProps)
(qemuMonitorGetTargetArch): Use better error category.

Without this patch, attempts to create a disk snapshot when qemu
is too old results in a cryptic message:

virsh # snapshot-create 23 --disk-only
error: operation failed: Failed to take snapshot: unknown command: 'snapshot_blkdev'

Now it reports:

virsh # snapshot-create 23 --disk-only
error: unsupported configuration: live disk snapshot not supported with this QEMU binary

All versions of qemu that support live disk snapshot also support
QMP (basically upstream qemu 1.1 and later, and backports to RHEL 6.2).

* src/qemu/qemu_capabilities.h (QEMU_CAPS_DISK_SNAPSHOT): New
capability.
* src/qemu/qemu_capabilities.c (qemuCaps): Track it.
(qemuCapsProbeQMPCommands): Set it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
it.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Simplify.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Likewise.

RHEL 6.3 uses dbus-devel-1.2.24, which lacked support for the
DBUS_TYPE_UNIX_FD define (contrast with Fedora 18 using 1.6.8).
But since it is an older dbus, it also lacks support for shutdown
inhibitions as provided by newer systemd.

Compilation failure introduced in commit 31330926.

* src/rpc/virnetserver.c (virNetServerAddShutdownInhibition):
Compile out if dbus is too old.

501bfad1 missed freeing priv->saveDir when opening the Xen unified
driver failed.

Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.

domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

Introduced by commit 1465876a, pushed under build-breaker &&
trivial rule.

Commit 79b8a569 removes virStateActive, however it forgot to
remove the symbol together. Pushed under build-breaker rule.

Add code in the python binding to cope with the new APIs
virConnectRegisterCloseCallback and
virConnectUnregisterCloseCallback. Also demonstrate their
use in the python domain events demo
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When the session dies or when the system is going to be shut down
we issue a virStateStop() call to instruct drivers to prepare to
be stopped. This will remove any previously acquire inhibitions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use the freedesktop inhibition DBus service to prevent host
shutdown or session logout while any VMs are running.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The only important state that should prevent libvirtd shutdown
is from running VMs. Networks, host devices, network filters
and storage pools are all long lived resources that have no
significant in-memory state. They should not block shutdown.

When the virStateStop() method is invoked, perform a managed
save of all VMs currently running
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit 71d12562 tried to fix a problem where rebasing an old
branch on top of newer libvirt.git resulted in automake failing
because of a missing AUTHORS file.  However, while the fix
worked for an incremental 'make', it did not work for someone
that directly reran './autogen.sh'.  Reported by Laine Stump.

* autogen.sh (autoreconf): Check for same conditions as cfg.mk.
* cfg.mk (_update_required): Add comments.

The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:

1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs          <------> Libvirt Storage Volumes.

The above understanding is based on http://libvirt.org/storage.html.

The operation supported on iSCSI pools includes:

1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).

iSCSI pools does not support operations such as: Create / remove pools
and volumes.

Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.

This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.

To detect if an interface's nwfilter has changed, we need to also
compare the filterparams, which is a hashtable of virNWFilterVarValue.
virHashEqual can do this nicely, but requires a pointer to a function
that will compare two of the items being stored in the hashes.

This resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=881480

These three functions:

  virDomainNetGetActualBridgeName
  virDomainNetGetActualDirectDev
  virDomainNetGetActualDirectMode

return attributes that are in a union whose contents are interpreted
differently depending on the actual->type and so they should only
return non-0 when actual->type is 'bridge' (in the first case) or
'direct' (in the other two cases, but I had neglected to do that, so
...DirectDev() was returning bridge.brname (which happens to share the
same spot in the union with direct.linkdev) if actual->type was
'bridge', and ...BridgeName was returning direct.linkdev when
actual->type was 'direct'.

How does this involve Bug 881480 (which was about the inability to
switch between two networks that both have "<forward mode='bridge'/>
<bridge name='xxx'/>"? Whenever the return value of
virDomainNetGetActualDirectDev() for the new and old network
definitions doesn't match, qemuDomainChangeNet() requires a "complete
reconnect" of the device, which qemu currently doesn't
support. ...DirectDev() *should* have been returning NULL for old and
new, but was instead returning the old and new bridge names, which
differ.

(The other two functions weren't causing any behavioral problems in
virDomainChangeNet(), but their problem and fix was identical, so I
included them in this same patch).

Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.

In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.

This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.

Fix the null pointer access when UUID is not specified.
Introduce a bool 'uuidUsable' to virStoragePoolAuthCephx that indicates
if uuid was specified or not and use it instead of the pointless
comparison of the static UUID array to NULL.
Add an error message if both uuid and usage are specified.

Fixes:
Error: FORWARD_NULL (CWE-476):
libvirt-0.10.2/src/conf/storage_conf.c:461: var_deref_model: Passing
    null pointer "uuid" to function "virUUIDParse(char const *, unsigned
    char *)", which dereferences it. (The dereference is assumed on the
    basis of the 'nonnull' parameter attribute.)
Error: NO_EFFECT (CWE-398):
    libvirt-0.10.2/src/conf/storage_conf.c:979: array_null: Comparing an
    array to null is not useful: "src->auth.cephx.secret.uuid != NULL".

Fix the "if ... else" coding style, and indentions problem.

virStringSplit requires a non-NULL input, but commit cef78ed8 forgot
to follow the rule.

* tools/virsh-domain.c (cmdReboot, cmdShutdown): Avoid NULL deref.

Commit a21f5112 fixed one API, but missed two others that also
failed to log their 'flags' argument.

* src/libvirt.c (virNodeSuspendForDuration, virDomainGetHostname):
Log flags parameter.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virNodeSuspend API allows for a duration of 0, to mean no
timed wakup. virsh needlessly forbids this though
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The shutdown and reboot commands in virsh allow a comma
separated list of mode values
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **

There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add support for doing controlled shutdown / reboot in the LXC
driver. The default behaviour is to try talking to /dev/initctl
inside the container's virtual root (/proc/$INITPID/root). This
works with sysvinit or systemd. If that file does not exist
then send SIGTERM (for shutdown) or SIGHUP (for reboot). These
signals are not any kind of particular standard for shutdown
or reboot, just something apps can choose to handle. The new
virDomainSendProcessSignal allows for sending custom signals.

We might allow the choice of SIGTERM/HUP to be configured for
LXC containers via the XML in the future.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The fact that only the guest agent, or ACPI flag can be used
when requesting reboot/shutdown is merely a limitation of the
QEMU driver impl at this time. Thus it should not be in
libvirt.c code
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>