This is the one function outside of domain_conf.c that plays around
with (even modifying) the internals of the virDomainNetDef, and thus
can't be fixed up simply by replacing direct accesses to the fields of
the struct with the GetActual*() access functions.

In this case, we need to check if the defined type is "network", and
if it is *then* check the actual type; if the actual type is "bridge",
then we can at least put the bridgename in a place where it can be
used; otherwise (if type isn't "bridge"), we behave exactly as we used
to - just null out *everything*.

The qemu driver accesses fields in the virDomainNetDef directly, but
with the advent of the virDomainActualNetDef, some pieces of
information may be found in a different place (the ActualNetDef) if
the network connection is of type='network' and that network is of
forward type='bridge|private|vepa|passthrough'. The previous patch
added functions to mask this difference from callers - they hide the
decision making process and just pick the value from the proper place.

This patch uses those functions in the qemu driver as a first step in
making qemu work with the new network types. At this point, the
virDomainActualNetDef is guaranteed always NULL, so the GetActualX()
function will return exactly what the def->X that's being replaced
would have returned (ie bisecting is not compromised).

There is one place (in qemu_driver.c) where the internal details of
the NetDef are directly manipulated by the code, so the GetActual
functions cannot be used there without extra additional code; that
file will be treated in a separate patch.

Previously all networks were composed of bridge devices created and
managed by libvirt, and the same operations needed to be done for all
of them when they were started and stopped (create and start the
bridge device, configure its MAC address and IP address, add iptables
rules). The new network types are (for now at least) managed outside
of libvirt, and the network object is used only to contain information
about the network, which is then used as each individual guest
connects itself.

This means that when starting/stopping one of these new networks, we
really want to do nothing, aside from marking the network as
active/inactive.

This has been setup as toplevel Start/Shutdown functions that do the
small bit of common stuff, then have a switch statement to execute
network type-specific start/shutdown code, then do a bit more common
code. The type-specific functions called for the new host bridge and
macvtap based types are currently empty.

In the future these functions may actually do something, and we will
surely add more functions that are similarly patterned. Once
everything has settled, we can make a table of "sub-driver" function
pointers for each network type, and store a pointer to that table in
the network object, then we can replace the switch statements with
calls to functions in the table.

The final step in this will be to add a new table (and corresponding
new functions) for new network types as they are added.

The network XML is updated in the following ways:

1) The <forward> element can now contain a list of forward interfaces:

     <forward .... >
       <interface dev='eth10'/>
       <interface dev='eth11'/>
       <interface dev='eth12'/>
       <interface dev='eth13'/>
     </forward>

   The first of these takes the place of the dev attribute that is
   normally in <forward> - when defining a network you can specify
   either one, and on output both will be present. If you specify
   both on input, they must match.

2) In addition to forward modes of 'nat' and 'route', these new modes
   are supported:

     private, passthrough, vepa - when this network is referenced by a
     domain's interface, it will have the same effect as if the
     interface had been defined as type='direct', e.g.:

        <interface type='direct'>
          <source mode='${mode}' dev='${dev}>
          ...
        </interface>

     where ${mode} is one of the three new modes, and ${dev} is an interface
     selected from the list given in <forward>.

     bridge - if a <forward> dev (or multiple devs) is defined, and
     forward mode is 'bridge' this is just like the modes 'private',
     'passthrough', and 'vepa' above. If there is no forward dev
     specified but a bridge name is given (e.g. "<bridge
     name='br0'/>"), then guest interfaces using this network will use
     libvirt's "host bridge" mode, equivalent to this:

       <interface type='bridge'>
          <source bridge='${bridge-name}'/>
          ...
       </interface>

3) A network can have multiple <portgroup> elements, which may be
   selected by the guest interface definition (by adding
   "portgroup='${name}'" in the <source> element along with the
   network name). Currently a portgroup can only contain a
   virtportprofile, but the intent is that other configuration items
   may be put there int the future (e.g. bandwidth config). When
   building a guest's interface, if the <interface> XML itself has no
   virtportprofile, and if the requested network has a portgroup with
   a name matching the name given in the <interface> (or if one of the
   network's portgroups is marked with the "default='yes'" attribute),
   the virtportprofile from that portgroup will be used by the
   interface.

4) A network can have a virtportprofile defined at the top level,
   which will be used by a guest interface when connecting in one of
   the 'direct' modes if the guest interface XML itself hasn't
   specified any virtportprofile, and if there are also no matching
   portgroups on the network.

the domain XML <interface> element is updated in the following ways:

1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')

2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.

3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.

The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).

The virtPortProfile in the domain interface struct is now a separately
allocated object *pointed to by* (rather than contained in) the main
virDomainNetDef object. This is done to make it easier to figure out
when a virtualPortProfile has/hasn't been specified in a particular
config.

virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).

If util.h is going to have a MIN, it may as well also have MAX.

This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.

The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.

Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.

* src/remote/remote_driver.c (remote_driver): Add new callbacks.
* src/remote/remote_protocol.x (remote_procedure): New RPCs.
(remote_domain_save_flags_args, remote_domain_restore_flags_args):
New structs.
* src/remote_protocol-structs: Update.

In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag.  But virDomainSave was implemented
before our policy of all new APIs having a flag argument.  Likewise
for virDomainRestore when restoring from a file.

The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.

* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.

Otherwise, an ABI mismatch gives error messages attributing the target
xml string as current, and the current domain state as the new xml.

* src/qemu/qemu_migration.c (qemuMigrationBegin): Use correct
argument order.

In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.

Since libvirt is multi-threaded, we should use FD_CLOEXEC as much
as possible in the parent, and only relax fds to inherited after
forking, to avoid leaking an fd created in one thread to a fork
run in another thread.  This gets us closer to that ideal, by
making virCommand automatically clear FD_CLOEXEC on fds intended
for the child, as well as avoiding a window of time with non-cloexec
pipes created for capturing output.

* src/util/command.c (virExecWithHook): Use CLOEXEC in parent.  In
child, guarantee that all fds to pass to child are inheritable.
(getDevNull): Use CLOEXEC.
(prepareStdFd): New helper function.
(virCommandRun, virCommandRequireHandshake): Use pipe2.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Simplify caller.

We already have a precedent of function documentation in C files,
where it is closer to the implementation (witness libvirt.h vs.
libvirt.c); maintaining docs in both files risks docs going stale.

While I was at it, I used consistent doxygen style on all comments.

* src/util/command.h: Remove duplicate docs, and move unique
documentation...
* src/util/command.c: ...here.
Suggested by Matthias Bolte.

The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:

  Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.

Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.

Reported by Michal Privoznik

It is common to see the sequence:

virErrorPtr save_err = virSaveLastError();
// do cleanup
virSetError(save_err);
virFreeError(save_err);

on cleanup paths.  But for functions where it is desirable to
return the errno that caused failure, this sequence can clobber
that errno.  virFreeError was already safe; this makes the other
two functions in the sequence safe as well, assuming all goes
well (on OOM, errno will be clobbered, but then again, save_err
won't reflect the real error that happened, so you are no longer
preserving the real situation - that's life with OOM).

* src/util/virterror.c (virSaveLastError, virSetError): Preserve
errno.

Commit 8665f855 changed generated.stamp to $(GENERATE).stamp,
but missed one instance in the CLEANFILES list. This can break the
build in case the generated code is deleted but the .stamp file stays
around and therefore the code isn't regenerated.

* src/qemu/qemu_driver.c: Fix uninitialized variable

We have added element period and quota. Document them in formatdomain.html.in.

This patch implements cfs_period and cfs_quota's modification.
We can use the command 'virsh schedinfo' to query or modify cfs_period and
cfs_quota.
If you query period or quota from config file, the value 0 means it does not set
in the config file.
If you set period or quota to config file, the value 0 means that delete current
setting from config file.
If you modify period or quota while vm is running, the value 0 means that use
current value.

This patch implements period and quota tunable XML configuration and parsing.
A quota or period of zero will be simply ignored.

Define the element cputune's child elements 'period' and 'quota':
<cputune>
  <period>100000</period>
  <quota>50000</quota>
</cputune>

This patch provides 4 APIs to get and set cpu.cfs_period_us and cpu.cfs_quota_us.

Introduce the function virCgroupForVcpu() to create sub directory for each vcpu.

qemu driver just accept xt_kbd codeset's keycode, so the lib virtkey
is used for translating keycodes from other codesets

Also support string names for the linux keycode(auto detect)
* tools/virsh.c: add new command "send-key"
* tools/virsh.pod: documents the new command