<hostdev> address parsing previously attempted to detect the number
base: currently it is hardcoded to base 16, which can break PCI
assignment via virt-manager. Revert to the previous behavior.

* src/conf/domain_conf.c: virDomainDevicePCIAddressParseXML, switch to
  virStrToLong_ui(bus, NULL, 0, ...) to autodetect base

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor

Prevent updating and tearing down of filter while the IP
address learning thread is running and has its own filtering
rules applied.

Introduce a function to notify the IP address learning
thread to terminate and thus release the lock on the interface.
Notify the thread before grabbing the lock on the interface
and tearing down the rules. This prevents a 'virsh destroy' to
tear down the rules that the IP address learning thread has
applied.

The functions invoked by the IP address learning thread
that apply some basic filtering rules did not clean up
any previous filtering rules that may still be there
(due to a libvirt restart for example). With the
patch below all the rules are cleaned up first.

Also, I am introducing a function to drop all traffic
in case the IP address learning thread could not apply
the rules.

* src/util/util.c: as it's used for checking things like .iso suffixes

The local DHCP server on virtbr0 sends DHCP ACK messages when a VM is
started and requests an IP address while the initial DHCP lease on the
VM's MAC address hasn't expired. So, also pick the IP address of the VM
if that type of message is seen.
Thanks to Gerhard Stenzel for providing a test case for this.

Changes from V1 to V2:
- cleanup: replacing DHCP option numbers through constants

Ubuntu's gntls package generates an Issuer line that looks like this:
        Issuer: C=US,ST=NY,L=Rochester,O=example.com,CN=example.com CA,EMAIL=hostmaster@example.com

While Red Hat's looks like this
Issuer: CN=Red Hat Emerging Technologies

Note the leading whitespace, and the additional fields in the former.

This patch updates the regular expression to:
 * trim leading characters before "Issuer:"
 * trim anything between Issuer: and CN=
 * trim anything after the next ,

I've tested this against the certool output of both RH and Ubuntu
generated certs.
Signed-off-by: NDustin Kirkland <kirkland@canonical.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Remove dead store to "rc".

When using -device syntax, the IO event will have a different
prefix, 'drive-' that needs to be skipped over before matching
against the libvirt disk alias

* src/qemu/qemu_driver.c: Skip QEMU_DRIVE_HOST_PREFIX in IO event

This binds the virDomainGetBlockInfo API to python's blockInfo
method on the domain object

>>> c = libvirt.openReadOnly('qemu:///session')
>>> d = c.lookupByName('demo')
>>> f = d.blockInfo("/dev/loop0", 0)
>>> print f
[1048576000L, 104857600L, 104857600L]

* python/libvirt-override-api.xml: Define override signature
* python/generator.py: Skip C impl generator for virDomainGetBlockInfo
* python/libvirt-override.c: Manual impl of virDomainGetBlockInfo

  virsh # domblkinfo demoguest /dev/hda2
  Capacity:       1048576000
  Allocation:     104857600
  Physical:       104857600

* tools/virsh.c: Implement domblkinfo command mapping to the
  new virDomainGetBlockInfo API

* src/qemu/qemu_driver.c: Implementation of virDomainGetBlockInfo
* src/util/storage_file.h: Add DEV_BSIZE
* src/storage/storage_backend.c: Remove DEV_BSIZE

* daemon/remote.c: Server side dispatcher
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h: Update
  with new API
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/remote_protocol.c, src/remote/remote_protocol.h: Update
* src/remote/remote_protocol.x: Define new wire protocol

This defines the internal driver API and stubs out each driver

* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver

Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size

* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo

When running virsh edit, we are unlinking and setting
the tmp variable to NULL before going to the end of the
function, meaning that we never free tmp.  Since the
exit to the function will always unlink and free tmp,
just remove this bit of code and let it get done at the
end.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

qemuDomainPCIAddressSetFree was freeing up the hash
table for the pci addresses, but not freeing up the addr
structure.  Looking over the callers of this function, it
seems like they expect it to also free up the structure,
so do that here.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

We were over-writing a pointer without freeing it in
case of a disk device, leading to a memory leak.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

When building on Ubuntu with make -j3 (or more), it would always
fail when trying to build virt-aa-helper.  I'm not an expert in
automake by any means, but I think the entry for virt-aa-helper
is mis-using LDADD; it shouldn't be putting direct paths to
libvirt_conf.la and libvirt_util.la, but instead referencing those
names.  With this patch in place, I'm able to successfully build
on Ubuntu 9.04 with make -j3.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

The previous commit changes a goto from 'endjob' to 'cleanup',
leaving the endjob label unused. Remove it to avoid compile
warning.

* src/qemu/qemu_driver.c: Remove 'endjob' label

I have primarily followed the pattern of the 'secret' driver to provide
support for the missing python bindings for the network filter API.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): When setting
"vm" to NULL, jump over vm-dereferencing code to "cleanup".
(qemuDomainRevertToSnapshot): Likewise.

* src/qemu/qemu_driver.c (qemudDomainCreate): Goto cleanup,
not "endjob", since we know "vm" is already NULL.  No semantic change.

Let configure detect ld instead of hardcoding /usr/bin/ld, because
MinGW may have ld in /bin.

Only use a .def file to export symbols on MinGW. Cygwin's ld supports
the normal .syms file used on Linux.

* cfg.mk (gnulib_srcdir): Override maint.mk default.
(_update_required): Run in correct directory.

use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account

So far the references to other filters needed to appear before filtering
rules. With the below patch they can now appear in any order.

Also I forgot to add a couple of 'rarp's.

In cases where the security driver failed to restore a label after a
guest has saved, we mistakenly jumped to the error cleanup paths.
This is not good, because the operation has in fact completed and
cannot be rolled back completely. Label restore is non-critical, so
just log the problem instead. Also add a missing restore call in
the error cleanup path

* src/qemu/qemu_driver.c: Fix handling of security driver
  restore failures in QEMU domain save

When cgroups is enabled, access to block devices is likely to be
restricted to a whitelist. Prior to saving a guest to a block device,
it is necessary to add the block device to the whitelist. This is
not required upon restore, since QEMU reads from stdin

* src/qemu/qemu_driver.c: Add block device to cgroups whitelist
  if neccessary during domain save.

The save process was relying on use of the shell >> append
operator to ensure the save data was placed after the libvirt
header + XML. This doesn't work for block devices though.
Replace this code with use of 'dd' and its 'seek' parameter.
This means that we need to pad the header + XML out to a
multiple of dd block size (in this case we choose 512).

The qemuMonitorMigateToCommand() monitor API is used for both
save/coredump, and migration via UNIX socket. We can't simply
switch this to use 'dd' since this causes problems with the
migration usage. Thus, create a dedicated qemuMonitorMigateToFile
which can accept an filename + offset, and remove the filename
from the current qemuMonitorMigateToCommand() API

* src/qemu/qemu_driver.c: Switch to qemuMonitorMigateToFile
  for save and core dump
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Create
  a new qemuMonitorMigateToFile, separate from the existing
  qemuMonitorMigateToCommand to allow handling file offsets

It is possible to use block devices with domain save/restore. Upon
failure QEMU unlinks the path being saved to. This isn't good when
it is a block device !

* src/qemu/qemu_driver.c: Don't unlink block devices if save fails

If a transient QEMU crashes during save attempt, then the virDomainPtr
object may be freed. If a persistent QEMU crashes during save, then
the 'priv->mon' field is no longer valid since it will be inactive.

* src/qemu/qemu_driver.c: Fix two crashes when QEMU exits
  during a save attempt

Qemu currently sends an Ethernet packet with protocol id 0x835 once a VM
was successfully migrated. The content of the packet looks like a
gratuitous RARP, just with the wrong protocol ID, which should be
0x8035. I wrote some filters to let either one of the packets pass and
am adapting the clean-traffic sample filter to use it. I am also
doing some changes on the existing ARP filter which was lacking a
test for source MAC address.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NGuido Günther <agx@sigxcpu.org>

In particular I was forgetting to take the qemuMonitorPrivatePtr
lock (via qemuDomainObjBeginJob), which would cause problems
if two users tried to access the same domain at the same time.
This patch also fixes a problem where I was forgetting to remove
a transient domain from the list of domains.

Thanks to Stephen Shaw for pointing out the problem and testing
out the initial patch.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Just removing reverences to the deprecated CVS server and the old git
on et.redhat.com