The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.

starting a service during rpm installation is impolite. It is even worse if done
during upgrade, for a service that was explicitly turned off.

Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

This patch adds network disk support to libvirt/QEMU.  The currently
supported protocols are nbd, rbd, and sheepdog.  The XML syntax is like
this:

    <disk type="network" device="disk">
      <driver name="qemu" type="raw" />
      <source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
        <host name="mon1.example.org" port="6000">
        <host name="mon2.example.org" port="6000">
        <host name="mon3.example.org" port="6000">
      </source>
      <target dev="vda" bus="virtio" />
    </disk>
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>

The signal's name is wrong...
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)

Currently only qemu is supported.

This patch prepares for the next patch.

* src/util/threadpool.c, src/util/threadpool.h: Thread pool
  implementation
* src/Makefile.am: Build thread pool
* src/libvirt_private.syms: Export public functions

* src/util/command.c (virCommandRun): Fix yesterday's regression
on logging, and avoid leaking log-only output captures.
Reported by Hu Tao.

When we get an EOF event on monitor connection, it may be a result of
either crash or graceful shutdown. QEMU which supports async events
(i.e., we are talking to it using JSON monitor) emits SHUTDOWN event on
graceful shutdown. In case we don't get this event by the time monitor
connection is closed, we assume the associated domain crashed.

Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_del() command and introduces it
in the disk removal paths.  If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.

If QEMU supports the command we issue the drive_del command after we attempt
to remove the device.  The guest may respond and remove the block device
before we get to attempt to call drive_del.  In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.

1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745Signed-off-by: NRyan Harper <ryanh@us.ibm.com>

Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths.  There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).

Changes since v2:
 - use VIR_ERROR to report when unplug command not found
Changes since v1:
 - return > 0 when command isn't present, < 0 on command failure
 - detect when drive_unplug command isn't present and log error
   instead of failing entire command
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>

The extra data isn't being free()'d for IO error events that have a reason.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- qemudDomainAttachPciControllerDevice: Don't build "devstr"
  if "-device" of qemu is not available, as "devstr" will only
  be used by "qemuMonitorAddDevice", which depends on "-device"
  argument of qemu is supported.

- "qemudDomainSaveImageOpen": Fix indent problem.

* src/qemu/qemu_driver.c

Commit febc5916 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.

The new version lists every virsh command, its description, and
the version of libvirt where it became available.

This fixes a misleading error message saying the libnl package
needs to be installed, when it's really the libnl-devel package
needing to be installed.

* .gnulib: Update to latest, for at least a stdint.h fix
* src/storage/storage_driver.c (storageVolumeZeroSparseFile)
(storageWipeExtent): Use better type, although it still triggers
spurious -Wformat warning on MacOS's gcc.

* src/openvz/openvz_conf.c (openvzLoadDomains): Replace unsafe
sscanf with safe direct parsing.
(openvzGetVEID): Avoid lost integer overflow detection.
(openvzAssignUUIDs): Likewise, and detect readdir failure.

popen must be matched with pclose (not fclose), or it will leak
resources.  Furthermore, it is a lousy interface when it comes to
signal handling.  We're much better off using our decent command
wrapper.  Note that virCommand guarantees that VIR_FREE(outbuf) is
both required and safe to call, whether virCommandRun succeeded or
failed.

* src/openvz/openvz_conf.c (openvzLoadDomains, openvzGetVEID):
Replace popen with virCommand usage.

Guarantee that outbuf/errbuf are allocated on success, even if to the
empty string.  Caller always has to free the result, and empty output
check requires checking if *outbuf=='\0'.  Makes the API easier to use
safely.  Failure is best effort allocation (some paths, like
out-of-memory, cannot allocate a buffer, but most do), so caller must
free buffer on failure.

* docs/internals/command.html.in: Update documentation.
* src/util/command.c (virCommandSetOutputBuffer)
(virCommandSetErrorBuffer, virCommandProcessIO) Guarantee empty
string on no output.
* tests/commandtest.c (test17): New test.

* docs/internals/command.html.in: Better documentation of buffer
vs. fd considerations.
* src/util/command.c (virCommandRunAsync): Reject raw execution
with string io.
(virCommandRun): Reject execution with user-specified fds not
visiting a regular file.

Most leaks could only occur on error cleanup paths.

* src/util/command.c (virCommandAddEnvString): Remove duplicate
code.
(virCommandToString, virCommandRun, virCommandRunAsync)
(virCommandWait): Report NULL command as ENOMEM, not invalid
usage.
Reported by Jiri Denemark.

* src/conf/domain_conf.c (virDomainDefParseXML): Prefer sysinfo
uuid over generating one, and if both uuids are present, require
them to be identical.
* src/qemu/qemu_conf.c (qemuBuildSmbiosSystemStr): Allow skipping
the uuid.
(qemudBuildCommandLine): Adjust caller; <smbios mode=host/> must
not use host uuid in place of guest uuid.

* docs/schemas/domain.rng (sysinf-value): Expand pattern.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.xml: Prefer '' over
"" for attribute values.  Copy real hardware values.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.args: Likewise.

* docs/schemas/domain.rng (sysinfo-system-name): Also allow
family.
* src/util/sysinfo.h (struct _virSysinfoDef): Add system_family.
* src/conf/domain_conf.c (virSysinfoParseXML)
(virDomainSysinfoDefFormat): Support it.
* src/util/sysinfo.c (virSysinfoDefFree, virSysinfoRead): Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmbiosSystemStr): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.xml: Adjust test.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.args: Likewise.

The log lists things like -smbios type=1,vendor="Red Hat", which
is great for shell parsing, but not so great when you realize that
execve() then passes those literal "" on as part of the command
line argument, such that qemu sets SMBIOS with extra literal quotes.

The eventual addition of virCommand is needed before we have the API
to shell-quote a string representation of a command line, so that the
log can still be pasted into a shell, but without inserting extra
bytes into the execve() arguments.

* src/qemu/qemu_conf.c (qemuBuildSmbiosBiosStr)
(qemuBuildSmbiosSystemStr): Qemu doesn't like quotes around uuid
arguments, and the remaining quotes are passed literally to
smbios, making <smbios mode='host'/> inaccurate.  Removing the
quotes makes the log harder to parse, but that can be fixed later
with virCommand improvements.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.args: 'Fix' test; it
will need fixing again once virCommand learns how to shell-quote a
potential command line.

"echo" is already in group "virsh", "freecell" and "hostname" are
already in group "host", so remove them from group "domain"

* tools/virsh.c

Humans consider January as month #1, while gmtime_r(3) calls it month #0.

While fixing it, render qemu's rtc parameter with leading zeros, as is more
commonplace.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=660194

When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number

* src/util/threads.h (virThreadID): New prototype.
* src/util/threads-pthread.c (virThreadID): New function.
* src/util/threads-win32.c (virThreadID): Likewise.
* src/libvirt_private.syms (threads.h): Export it.
* daemon/event.c (virEventInterruptLocked): Use it to avoid
warning on BSD systems.

"virCommandRun": if "cmd->outbuf" or "cmd->errbuf" is NULL,
libvirtd will be crashed when trying to start a qemu domain
(which invokes "virCommandRun"), it caused by we try to use
"*cmd->outbuf" and "*cmd->errbuf" regardless of cmd->outbuf
or cmd->errbuf is NULL.

* src/util/command.c (virCommandRun)