This new naming matches the terminology used in the error
messages that the callers report.
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The term "access control list" better describes the concept involved.
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.

We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.

These are not in fact errors, but an expected scenario.

This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

It is easier for management software (and subsequently
distributions) to install hook script under
/etc/libvirt/hooks/$driver.d/ and have libvirt execute them in
alphabetical order. To maintain backwards compatibility,
/etc/libvirt/hooks/$driver hook script is executed the first
followed by scripts from the $driver.d directory.

The stdio is chained between the scripts. The output of the first
script is input of the second and so on.
Signed-off-by: NDmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This refactor is needed to support support hooks placed in
several files.
Signed-off-by: NDmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Using virKModConfig would not simplify any existing code.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Mediated devices support arbitrary vendor-specific attributes that can
be attached to a mediated device. These attributes are ordered, and are
written to sysfs in order after a device is created. This patch adds
support for these attributes to the mdev data types and XML schema.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Introduced by commit 72ab0b6d which
added some code depending on libvirt's log format string into
qemuProcessReadLogOutput. This function was deleted by commit
932534e8 later.

Drop the comment.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Closes: https://gitlab.com/libvirt/libvirt/-/issues/35

In v6.4.0-72-g3dda889a I've introduced parsing and formatting
of new sysinfo type 'fwcfg'. However, I've forgot to introduce
code that would free parsed data.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Since 9ea90206, @drvpath could be overwritten if we jumped to recheck

Found by Coverity.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Since 5084091a, @authcred is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value, so
we need to treat it as so.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Since 5084091a, @tmp is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value,
so we need to treat it as so.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Introduce two utility functions to parse a kernel command
line string according to the kernel code parsing rules in
order to enable the caller to perform operations such as
verifying whether certain argument=value combinations are
present or retrieving an argument's value.
Signed-off-by: NPaulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This was mostly boilerplate conversion, but in one case I needed to
define several differently named char* to take the place of a single
char *tmp that was re-used multiple times, and in another place there
was a single char* that was used at the toplevel of the function, and
then later used repeatedly inside a for loop, so I defined a new
separate char* inside the loop.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

IPv6 does support masquerade since Linux 3.9.0 / ip6tables 1.4.18,
which is Fedora 18 / RHEL-7 vintage, which covers all our supported
Linux versions.
Reviewed-by: NLaine Stump <laine@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In v6.4.0-rc1~143 I've introduced a check that is supposed to
return from the function early, if given path is not a dm target.
While the idea is still valid, the implementation had a flaw.
It calls stat() over given path and the uses major(sb.st_dev) to
learn the major of the device. This is then passed to
dm_is_dm_major() which returns true or false depending whether
the device is under devmapper's control or not.

The problem with this approach is in how the major of the device
is obtained - paths managed by devmapper are special files and
thus we want to be using st_rdev instead of st_dev to obtain the
major number. Well, that's what virIsDevMapperDevice() does
already so might as well us that.

Fixes: 01626c66
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839992Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

When introducing virdevmapper.c (in v4.3.0-rc1~427) I didn't
realize there is a function that calls in devmapper. The function
is called virIsDevMapperDevice() and lives in virutil.c. Now that
we have a special file for handling devmapper move it there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com

Use VIR_FREE directly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com

QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.

It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.

The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

When trying to decode DMI table, just before constructing
virCommand() the decoder is looked for in PATH using
virFindFileInPath(). Well, this is not necessary because
virCommandRun() will do this too (in virExec()).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Virtually every variable defined in the function can be freed
automatically when going out of scope.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The virStateInitialize() function has ATTRIBUTE_NONNULL()
referring to @root argument (incorrectly anyway) but in
daemonRunStateInit() NULL is passed in anyway.

Then there is virCommandAddArgPair() which also has
ATTRIBUTE_NONNULL() for one of its arguments and then checks the
argument for being NULL anyways.
Signed-off-by: NBihong Yu <yubihong@huawei.com>
Reviewed-by: NChuan Zheng <zhengchuan@huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This is convenience macro, use it more. This commit was generated
using the following spatch:

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ...
  - old = ctxt->node;
    ... when != old
  - ctxt->node = old;

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old = ctxt->node;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ... when != old
  - ctxt->node = old;
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This reverts b897973f

Even though it may have been the case in the past, relative
XPaths don't overwrite the ctxt->node. Thus, there's no need to
save it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To avoid bugs with mixing of g_object_(ref|unref) vs
virObject(Ref|Unref), we want every virObject to be
a GObject.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

To prepare for a conversion to GObject, we need virObjectUnref
to have the same API design as g_object_unref, which means it
needs to be void.

A few places do actually care about the return value though,
and in these cases a thread local flag is used to determine
if the dispose method was invoked.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The purpose of this function is to give a short description that would
be change when a host CPU is replaced with a different model. This is
currently implemented by reading /proc/cpuinfo.

It should be implemented for all architectures for which the QEMU driver
stores host CPU data in the capabilities cache. In other words for archs
that support host-model CPUs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.

To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

QEMU models guestfwd as:

 'guestfwd': [
                 { "str": "tcp:10.0.2.1:4600-chardev:charchannel0" },
                 { "str": "...."},
             ]

but the command line as:

guestfwd=tcp:10.0.2.1:4600-chardev:charchannel0,guestfwd=...

I guess the original idea was to make it extensible while not worrying
about adding another object for it. Either way it requires us to add yet
another JSON->cmdline convertor for arrays.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In preparation for converting the generator of -netdev to generate JSON
which will be used to do the command line rather than the other way
around we need to introduce a convertor which properly configures
virQEMUBuildCommandLineJSON for the quirks of -netdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Add a variant similar to virJSONValueObjectAppendString which also
formats more complex value strings with printf syntax.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>