Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

* configure.ac: Drop sys/wait.h check.
* src/libvirt.c (includes): Use header unconditionally.
* src/remote/remote_driver.c (includes): Likewise.
* src/storage/storage_backend.c (includes): Likewise.
* src/util/ebtables.c (includes): Likewise.
* src/util/hooks.c (includes): Likewise.
* src/util/iptables.c (includes): Likewise.
* src/util/util.c (includes): Likewise.

This defines the internal driver API and stubs out each driver

* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver

Signed-off-by: NChris Lalancette <clalance@redhat.com>

virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points

The function name was written with capital I in the Filter part.

* src/libvirt.c (virConnectGetLibVersion): Don't emit error on
success.

This flag is used in migration prepare step to send updated XML
definition of a guest.

Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.

This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.

* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
  driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
  stubs for new driver entry point

The current API for domain events has a number of problems

 - Only allows for domain lifecycle change events
 - Does not allow the same callback to be registered multiple times
 - Does not allow filtering of events to a specific domain

This introduces a new more general purpose domain events API

  typedef enum {
     VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0,       /* virConnectDomainEventCallback */
      ...more events later..
  }

  int virConnectDomainEventRegisterAny(virConnectPtr conn,
                                       virDomainPtr dom, /* Optional, to filter */
                                       int eventID,
                                       virConnectDomainEventGenericCallback cb,
                                       void *opaque,
                                       virFreeCallback freecb);

  int virConnectDomainEventDeregisterAny(virConnectPtr conn,
                                         int callbackID);

Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature

eg

  int myDomainEventCallback(virConnectPtr conn,
                            virDomainPtr dom,
                            int event,
                            int detail,
                            void *opaque)
  {
    ...
  }

  virConnectDomainEventRegisterAny(conn, NULL,
                                   VIR_DOMAIN_EVENT_ID_LIFECYCLE,
                                   VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
                                   NULL, NULL);

The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature

* include/libvirt/libvirt.h.in: Define new APIs for registering
  domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
  src/xenapi/xenapi_driver.c: Stub out new API entries

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

Prior to this patch, there was an inconsistent mix between GNU and C99.

For consistency, and potential portability to other compilers, stick
with the C99 vararg macro syntax.

* src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/conf/domain_conf.c (virDomainReportError): Likewise.
* src/conf/domain_event.c (eventReportError): Likewise.
* src/conf/interface_conf.c (virInterfaceReportError): Likewise.
* src/conf/network_conf.c (virNetworkReportError): Likewise.
* src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise.
* src/conf/secret_conf.h (virSecretReportError): Likewise.
* src/conf/storage_conf.h (virStorageReportError): Likewise.
* src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than
  GNU vararg macro syntax.
* src/esx/esx_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_interface_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_network_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_secret_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_storage_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_util.c (ESX_ERROR): Likewise.
* src/esx/esx_vi.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vmx.c (ESX_ERROR): Likewise.
* src/util/hostusb.c (usbReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/util/json.c (virJSONError): Likewise.
* src/util/macvtap.c (ReportError): Likewise.
* src/util/pci.c (pciReportError): Likewise.
* src/util/stats_linux.c (virStatsError): Likewise.
* src/util/util.c (virUtilError): Likewise.
* src/util/xml.c (virXMLError): Likewise.
* src/xen/proxy_internal.c (virProxyError): Use C99 rather than
  GNU vararg macro syntax.
* src/xen/sexpr.c (virSexprError): Likewise.
* src/xen/xen_driver.c (xenUnifiedError): Likewise.
* src/xen/xen_hypervisor.c (virXenError): Likewise.
* src/xen/xen_inotify.c (virXenInotifyError): Likewise.
* src/xen/xend_internal.c (virXendError): Likewise.
* src/xen/xm_internal.c (xenXMError): Likewise.
* src/xen/xs_internal.c (virXenStoreError): Likewise.
* src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/datatypes.c (virLibConnError): Likewise.
* src/interface/netcf_driver.c (interfaceReportError): Likewise.
* src/libvirt.c (virLibStreamError): Likewise.
* src/lxc/lxc_conf.h (lxcError): Likewise.
* src/network/bridge_driver.c (networkReportError): Likewise.
* src/nodeinfo.c (nodeReportError): Likewise.
* src/opennebula/one_conf.h (oneError): Likewise.
* src/openvz/openvz_conf.h (openvzError): Likewise.
* src/phyp/phyp_driver.c (PHYP_ERROR): Likewise.
* src/qemu/qemu_conf.h (qemuReportError): Likewise.
* src/remote/remote_driver.c (errorf): Likewise.
* src/security/security_driver.h (virSecurityReportError): Likewise.
* src/test/test_driver.c (testError): Likewise.
* src/uml/uml_conf.h (umlReportError): Likewise.
* src/vbox/vbox_driver.c (vboxError): Likewise.
* src/vbox/vbox_tmpl.c (vboxError): Likewise.

This provides the internal glue for the driver API

* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
  to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub out entry points

The internal glue layer for the new pubic API

* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
  API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub new entry point

Kind of minor, but it annoys me that the default auth callback
doesn't put a space between the prompt and the input, like a typical
terminal, ssh, etc. This patch changes the current prompt:

Please enter your authentication name:myuser

to

Please enter your authentication name: myuser

The commands updated are SetMem, SetMaxMem, SetVcpus, and PinVcpu.

Implementation of public API for virDomain{Attach,Detach}DeviceFlags.

V2: Don't break remote compatibility with older libvirtd

virDomain{Attach,Detach}Device is now only permitted on active
domains.  Explicitly state this restriction in the API
documentation.

V2: Only change doc, dropping the hunk that forced the restriction
    in libvirt frontend.

* src/libvirt.c: extend the debug statement to log flags too

The virRaiseErrorFull() may invoke the error handler callback
functions an application has registered. This is not good
because the connection object may not be available at this
point, and the caller may be holding locks. This creates a
problem if the error handler calls back into libvirt.

The solutuon is to move invocation of the handler into the
final cleanup code in the public API entry points, where it
is guarenteed to have safe state.

* src/libvirt.c: Invoke virDispatchError() in all error paths
* src/util/virterror.c: Remove virSetConnError/virSetGlobalError,
  replacing with virDispatchError(). Move invocation of the
  error callbacks into virDispatchError() instead of the
  virRaiseErrorFull function which is not in a safe context

* src/libvirt.c: implement the main entry point
* src/libvirt_public.syms: add it to the exported symbols

Commit 33a198c1 increased the gcrypt
version requirement to 1.4.2 because the GCRY_THREAD_OPTION_VERSION
define was added in this version.

The configure script doesn't check for the gcrypt version. To support
gcrypt versions < 1.4.2 change the virTLSThreadImpl initialization
to use GCRY_THREAD_OPTION_VERSION only if it's defined.

* src/libvirt.c: adds the public entry point virConnectCompareCPU()

GNUTLS uses gcrypt for its crypto functions. gcrypt requires
that the app/library initializes threading before using it.
We don't want to force apps using libvirt to know about
gcrypt, so we make virInitialize init threading on their
behalf. This location also ensures libvirtd has initialized
it correctly. This initialization is required even if libvirt
itself were only using one thread, since another non-libvirt
library (eg GTK-VNC) could also be using gcrypt from another
thread

* src/libvirt.c: Register thread functions for gcrypt
* configure.in: Add -lgcrypt to linker flags

* src/libvirt.c (virDomainGetVcpus): Describe new, stronger
requirement on "maplen"s relationship to "cpumaps".

This patch fixes the bug where paused/running state is not
transmitted during migration.  As a result, in the QEMU driver
for example the machine was always started on the destination
end.

In order to do so, just read the state and if it is appropriate and
set the VIR_MIGRATE_PAUSED flag.

* src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2):
  Automatically add VIR_MIGRATE_PAUSED when appropriate.
* src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer
  error message when migration of paused domains is attempted.

This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.

* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.

There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.

Introduce a number of new APIs to  expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.

 * virDomainIsActive: Checking virDomainGetID is not reliable
   since it is not possible to distinguish between error condition
   and inactive domain for ID of -1.
 * virDomainIsPersistent: Check whether a persistent config exists
   for the domain

 * virNetworkIsActive: Check whether the network is active
 * virNetworkIsPersistent: Check whether a persistent config exists
   for the network

 * virStoragePoolIsActive: Check whether the storage pool is active
 * virStoragePoolIsPersistent: Check whether a persistent config exists
   for the storage pool

 * virInterfaceIsActive: Check whether the host interface is active

 * virConnectIsSecure: whether the communication channel to the
   hypervisor is secure
 * virConnectIsEncrypted: whether any network based commnunication
   channels are encrypted

NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.

 * include/libvirt/libvirt.h.in: Define public API
 * src/driver.h: Define internal driver API
 * src/libvirt.c: Implement public API entry point
 * src/libvirt_public.syms: Export API symbols
 * src/esx/esx_driver.c, src/lxc/lxc_driver.c,
   src/interface/netcf_driver.c, src/network/bridge_driver.c,
   src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
   src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
   src/remote/remote_driver.c, src/test/test_driver.c,
   src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
   src/xen/xen_driver.c: Stub out driver tables

* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
  src/lxc/lxc_controller.c src/node_device/node_device_hal.c
  src/openvz/openvz_conf.c src/qemu/qemu_driver.c
  src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
  src/storage/storage_backend_disk.c src/storage/storage_driver.c
  src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
  src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
  review and those are the fixes correcting the problems