Since the disk is necessary only to get the source modify the functions
to take the source directly and rename them to
qemu[Setup|Teardown]ImageChainCgroup.

Additionally drop a pointless comment containing the old function name.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When we need to detect a chain for a image which will become the new
source for a disk (e.g. after a disk media change or a blockjob) we'd
need to replace disk->src temporarily to do so.

Move the 'disksrc' temporary variable to an argument and adjust callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The function at first validates the top image of the chain, then
traverses the chain as declared in the XML (if any) and then procedes to
detect the rest of the chain from images. All of the steps have their
own temporary iterator.

Clarify the use scope of the steps by introducing a new temp variable
holding the top level source and adding comments.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Commit f2f84b4d added storagepoolxml2argvtest processing; however,
it didn't follow alter the else to !WITH_STORAGE and add the source
itself to the EXTRA_DIST like the other WITH_STORAGE options for
virstorageutiltest and storagevolxml2argvtest.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 7a227688 caused a build failure on mingw. Following
other uses of including ../src/libvirt_driver_storage_impl.la
I moved to under the WITH_STORAGE conditional.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.

Based off original patch/concept:

https://www.redhat.com/archives/libvir-list/2014-May/msg00940.htmlSigned-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

If the Storage Pool Namespace XML data exists, format the mount
options on the MOUNT command line and issue a VIR_WARN to indicate
that the storage pool was tainted by custom mount_opts.

When the pool is started, the options will be generated on the
command line along with the options already defined.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.

Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.

Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.

Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Introduce the infrastructure necessary to manage a Storage Pool XML
Namespace. The general concept is similar to virDomainXMLNamespace,
except that for Storage Pools the storage backend specific details
can be stored within the _virStoragePoolOptions unlike the domain
processing code which manages its xmlopt's via the virDomainXMLOption
which is allocated/passed around for each domain.

This patch defines the add the parse, format, free, and href methods
required to process the XML and callout from the Storage Pool Def
parse, format, and free API's to perform the action on the XML data
for/from the backend.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the addition of the <protocol ver='n'/> to the provided XML.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

If protocolVer present, add the -o nfsvers=# to the command
line for the NFS Storage Pool
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1584663

Modify the command generation to add some default options to the
fs/netfs storage pools based on the OS type. For Linux, it'll be
the "nodev, nosuid, noexec". For FreeBSD, it'll be "nosuid, noexec".
For others, just leave the options alone.

Modify the storagepoolxml2argvtest to handle the fact that the
same input XML could generate different output XML based on whether
Linux, FreeBSD, or other was being built.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Rather than deref off of "caps->guests", let's pass "caps->guests" and
caps->nguests to have the helper use "guests[i]->" instead.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Let's extract out the <guest> code into it's own method/helper.

NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Rather than deref off of "caps->host.", let's pass "&caps->host"
and make the helper use "host->" instead.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Let's extract out the <host> code into it's own method/helper.

NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit 8b035c84.

The MTTCG impl in QEMU does allow pinning vCPUs.

When the guest is running we already check if pinning is
possible in the qemuDomainPinVcpuLive method, so this
check was adding no benefit.

When the guest is not running, we cannot know whether the
subsequent launch will use MTTCG or TCG, so we must allow
the pinning request. If the guest does use TCG on the next
launch it will fail, but this is no worse than if the user
had done a virDomainDefineXML with an XML doc specifying
vCPU pinning.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

MTTCG is the new multi-threaded impl of TCG which follows
KVM in having one host OS thread per vCPU. Historically
we have discarded all PIDs reported for TCG guests, but
we must now selectively honour this data.

We don't have anything in the domain XML that indicates
whether a guest is using TCG or MTTCG. While QEMU does
have an option (-accel tcg,thread=single|multi), it is
not desirable to expose this in libvirt. QEMU will
automatically use MTTCG when the host/guest architecture
pairing is known to be safe. Only developers of QEMU TCG
have a strong reason to override this logic.

Thus we use two sanity checks to decide if the vCPU
PID information is usable. First we see if the PID
duplicates the main emulator PID, and second we see
if the PID duplicates any other vCPUs.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The transition to the ready state is best observed by events as it's
ansynchronous and does not hint users to do polling. As currently only
the qemu driver supports block copy and block commit and the ready state
event was introduced by qemu 1.3 we can fully switch to the new
approach.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The documentation was only referring to a copy job, but in fact any
running blockjob will have the same results.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add documentation that the 'VIR_DOMAIN_BLOCK_COPY_TRANSIENT_JOB' flag
is auto-assumed if the block copy job is started while the VM is
transient and remove the restriction to define the domain when copy
is running.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The previous commit created new chains to hold the firewall rules. This
commit changes the code that creates rules to place them in the new
private chains instead of the builtin top level chains.

With two networks running, the rules in the filter table now look like

  -N LIBVIRT_FWI
  -N LIBVIRT_FWO
  -N LIBVIRT_FWX
  -N LIBVIRT_INP
  -N LIBVIRT_OUT
  -A INPUT -j LIBVIRT_INP
  -A FORWARD -j LIBVIRT_FWX
  -A FORWARD -j LIBVIRT_FWI
  -A FORWARD -j LIBVIRT_FWO
  -A OUTPUT -j LIBVIRT_OUT
  -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable
  -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT
  -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable
  -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT
  -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT
  -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT
  -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT
  -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT
  -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT
  -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT
  -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT
  -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT
  -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT
  -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT
  -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT
  -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT

While in the nat table:

  -N LIBVIRT_PRT
  -A POSTROUTING -j LIBVIRT_PRT
  -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN
  -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN
  -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535
  -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535
  -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE
  -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN
  -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN
  -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535
  -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535
  -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE

And finally the mangle table:

  -N LIBVIRT_PRT
  -A POSTROUTING -j LIBVIRT_PRT
  -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
  -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically firewall rules for virtual networks were added straight
into the base chains. This works but has a number of bugs and design
limitations:

  - It is inflexible for admins wanting to add extra rules ahead
    of libvirt's rules, via hook scripts.

  - It is not clear to the admin that the rules were created by
    libvirt

  - Each rule must be deleted by libvirt individually since they
    are all directly in the builtin chains

  - The ordering of rules in the forward chain is incorrect
    when multiple networks are created, allowing traffic to
    mistakenly flow between networks in one direction.

To address all of these problems, libvirt needs to move to creating
rules in its own private chains. In the top level builtin chains,
libvirt will add links to its own private top level chains.

Addressing the traffic ordering bug requires some extra steps. With
everything going into the FORWARD chain there was interleaving of rules
for outbound traffic and inbound traffic for each network:

  -A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
  -A FORWARD -i virbr1 -o virbr1 -j ACCEPT
  -A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
  -A FORWARD -i virbr0 -o virbr0 -j ACCEPT
  -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
  -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable

The rule allowing outbound traffic from virbr1 would mistakenly
allow packets from virbr1 to virbr0, before the rule denying input
to virbr0 gets a chance to run.

What we really need todo is group the forwarding rules into three
distinct sets:

 * Cross rules - LIBVIRT_FWX

  -A FORWARD -i virbr1 -o virbr1 -j ACCEPT
  -A FORWARD -i virbr0 -o virbr0 -j ACCEPT

 * Incoming rules - LIBVIRT_FWI

  -A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable

 * Outgoing rules - LIBVIRT_FWO

  -A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
  -A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
  -A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
  -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable

There is thus no risk of outgoing rules for one network mistakenly
allowing incoming traffic for another network, as all incoming rules
are evalated first.

With this in mind, we'll thus need three distinct chains linked from
the FORWARD chain, so we end up with:

        INPUT --> LIBVIRT_INP   (filter)

       OUTPUT --> LIBVIRT_OUT   (filter)

      FORWARD +-> LIBVIRT_FWX   (filter)
              +-> LIBVIRT_FWO
              \-> LIBVIRT_FWI

  POSTROUTING --> LIBVIRT_PRT   (nat & mangle)
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Some of the query callbacks want to know the firewall layer that was
being used for triggering the query to avoid duplicating that data.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the platform driver impls to run logic before and after the
firewall reload process.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

disk->mirror would not be cleared while the local pointer was freed in
qemuDomainBlockCommit if qemuDomainObjExitMonitor or qemuBlockJobDiskNew
would return a failure.

Since block job handling is executed in the separate handler which needs
a qemu job, we don't need to pre-set the mirror state prior to starting
the job. Similarly the block copy job does not do that.

Move the setting of the data after starting the job so that we avoid
this problem.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

While this should not be necessary as we clear it in the event handler,
let's be sure and clear it prior to starting the job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Switching a block job to some states (e.g. QEMU_BLOCKJOB_STATE_READY)
might not require a job, thus if it will become ready asynchronously we
should not overwrite the state any more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

While the callers should make sure that they don't call
qemuBlockJobEmitEvents for any internal state or job, let's add checks
that prevents us from emitting wrong events altogether.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Mixing documentation strings trailing the enum value and preceeding the
enum value ends in a big mixup. Fix docs string for
VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN so that it's not squished together
with the next one.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1665553

Ceph can be mounted just like any other filesystem and in fact is
a shared and cluster filesystem. The filesystem magic constant
was taken from kernel sources as it is not in magic.h yet.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:

  @ rule1 @
  identifier a, b;
  @@

  - b = a;
    ...
  - a = NULL;
  + VIR_STEAL_PTR(b, a);

Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Document the <bhyve:commandline> element which allows
to inject custom command line arguments for bhyve.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:

  <bhyve:commandline>
    <bhyve:arg value='-newarg'/>
  </bhyve:commandline>

 * Define virDomainXMLNamespace for the bhyve driver, which
   at this point supports only the 'commandline' element
   described above,
 * Update command generation code to inject these command line
   arguments between driver-generated arguments and the vmname
   positional argument.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

A couple places in the docs didn't get updated when the forward mode
"open" was added.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

networkMigrateStateFiles was added nearly 5 years ago when the network
state directory was moved from /var/lib/libvirt to /var/run/libvirt
just prior to libvirt-1.2.4). It was only required to maintain proper
state information for networks that were active during an upgrade that
didn't involve rebooting the host. At this point the likelyhood of
anyone upgrading their libvirt from pre-1.2.4 directly to 5.0.0 or
later *without rebooting the host* is probably so close to 0 that no
properly informed bookie would take *any* odds on it happening, so it
seems appropriate to remove this pointless code.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Upcoming patches need an array of strings for use in QMP
block-dirty-bitmap-merge.  A convenience wrapper cuts down
on the verbosity of creating the array, similar to the
existing virJSONValueObjectAppendString().
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>