Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.

Drop the attribute and adjust the code accordingly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

For command line we need two things:

1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias

In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.

For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Couple of reasons for that:

a) there's no monitor command to change path where the pr-helper
connects to, or
b) there's no monitor command to introduce a new pr-helper for a
disk that already exists.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:

  <reservations enabled='yes' managed='no'>
    <source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
  </reservations>

If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:

https://www.redhat.com/archives/libvir-list/2017-November/msg01005.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.

We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Few things which are currently stored the virDomainDiskDef structure are
actually relevant for the storage source as well. Add the fields with a
note that they are just mirror of the values from the disk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The virStorageFileSupportsSecurityDriver and
virStorageFileSupportsAccess currently just return a boolean
value. This is ok because they don't have any failure scenarios
but a subsequent patch is going to introduce potential failure
scenario. This changes their return type from a boolean to an
int with values -1, 0, 1.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virStorageFileGetBackingStoreStr method has overloaded the NULL
return value to indicate both no backing available and a fatal
error dealing with it.

The caller is thus not able to correctly propagate the error
messages.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently it is not used in backing chains and does not seem that we
will need to use it so return it back to the disk definition. Thankfully
most accesses are done via the accessors.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Pass in the XPath context as we do in all other places rather than
allocating a new one.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This function returns nothing but zero. Therefore it makes no
sense to have it returning an integer.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This will be the first private piece of data that will need to be stored
in the XML for some drivers. Add helpers which will do it.

Some drive backends allow output of debugging information which can be
configured using properties of the image. Add fields to virStorageSource
which will allow configuring them.

Since the virStorageEncryptionPtr encryption; is a member of
 _virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:

   Source{File|Dir|Block|Volume}
   SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}

NB: Simple includes sheepdog, ftp, ftps, tftp

That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.

Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.

The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.

Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.

Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.

Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.

Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine.  The two new .args
file are exact copies of the non "-source" version of the file.

The virschematest will read the new test files and validate from a
RNG viewpoint things are fine

Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.

Introduce the bare necessities to add privateData to _virStorageSource.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

When formatting an inactive or migratable XML we will need to suppress
backing chain members which were detected from the disk to keep
semantics straight. This means we need to record, whether a
virStorageSource originates from autodetection.

Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.

Adding these functions creates a central points for further refactors.

The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.

Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.

Introduce a function to setup any TLS needs for a disk source.

If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.

For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.

Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.

Sample XML for a VxHS disk:

<disk type='network' device='disk'>
  <driver name='qemu' type='raw' cache='none'/>
  <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
    <host name='192.168.0.1' port='9999'/>
  </source>
  <target dev='vda' bus='virtio'/>
</disk>

Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.

Update the qemuxml2xmltest in order to add a test to show the proper
parsing.

Also update the docs to describe the tls attribute.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We have been trying to implement the ALLOCATE flag to mean
"the volume should be fully allocated after the resize".

Since commit b0579ed9 we do not allocate from the existing
capacity, but from the existing allocation value.
However this value is a total of all the allocated bytes,
not an offset.

For a sparsely allocated file:
$ perl -e 'print "x"x8192;' > vol1
$ fallocate -p -o 0 -l 4096 vol1
$ virsh vol-info vol1 default
Capacity:       8.00 KiB
Allocation:     4.00 KiB

Treating allocation as an offset would result in an incompletely
allocated file:
$ virsh vol-resize vol1 --pool default 16384 --allocate
Capacity:       16.00 KiB
Allocation:     12.00 KiB

Call fallocate from zero on the whole requested capacity to fully
allocate the file. After that, the volume is fully allocated
after the resize:
$ virsh vol-resize vol1 --pool default 16384 --allocate
$ virsh vol-info vol1 default
Capacity:       16.00 KiB
Allocation:     16.00 KiB

Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Make it less confusing by naming the field which refers to the storage
object as 'nodestorage'.
Reviewed-by: NEric Blake <eblake@redhat.com>

Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.

virStorageSourceNetworkDefaultPort does not need to be exported any
more.

Make the stuff hardcoded in qemu a global helper so that other parts of
the code can determine the default port too.

Some callers don't need to know the backing format. Make the argument
optional by using a dummy int if NULL is passed.

'nodeformat' should be used for strings which describe the storage
format object, and 'nodebacking' for the actual storage object itself.

The function has very specific semantics. Split out the part that parses
the backing store specification string into a separate helper so that it
can be reused later while keeping the wrapper with existing semantics.

Note that virStorageFileParseChainIndex is pretty well covered by the
test suite.

The code at the very bottom of the DAC secdriver that calls
chown() should be fine with read-only data. If something needs to
be prepared it should have been done beforehand.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similarly to 29bb0669 forbid paths used with blockjobs to be relative.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300177

Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfo to get capacity specific data
about the storage backing source or volume -- create a common API
to handle the details for both.

As a side effect, virStorageFileProbeFormatFromBuf returns to being
a local/static helper to virstoragefile.c

For the QEMU code - if the probe is done, then the format is saved so
as to avoid future such probes.

For the storage backend code, there is no need to deal with the probe
since we cannot call the new API if target->format == NONE.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfoFD to fill in the storage backing
source or volume allocation, capacity, and physical values - create a
common API that will handle the details for both.

The common API will fill in "default" capacity values as well - although
those more than likely will be overridden by subsequent code. Having just
one place to make the determination of what the values should be will
make things be more consistent.

For the QEMU code - the data filled in will be for inactive domains
for the GetBlockInfo and DomainGetStatsOneBlock API's. For the storage
backend code - the data will be filled in during the volume updates.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '8dc27259' introduced virStorageSourceUpdateBlockPhysicalSize
in order to retrieve the physical size for a block backed source device
for an active domain since commit id '15fa84ac' changed to use the
qemuMonitorGetAllBlockStatsInfo and qemuMonitorBlockStatsUpdateCapacity
API's to (essentially) retrieve the "actual-size" from a 'query-block'
operation for the source device.

However, the code only was made functional for a BLOCK backing type
and it neglected to use qemuOpenFile, instead using just open. After
the open the block lseek would find the end of the block and set the
physical value, close the fd and return.

Since the code would return 0 immediately if the source device wasn't
a BLOCK backed device, the physical would be displayed incorrectly,
such as follows in domblkinfo for a file backed source device:

Capacity:       1073741824
Allocation:     0
Physical:       0

This patch will modify the algorithm to get the physical size for other
backing types and it will make use of the qemuDomainStorageOpenStat
helper in order to open/stat the source file depending on its type.
The qemuDomainGetStatsOneBlock will no longer inhibit printing errors,
but it will still ignore them leaving the physical value set to 0.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Allow using 'ssh' protocol in backing chains and later for disks
themselves.