Commit 32617617 made it possible to use pipes instead of sockets
for outgoing tunneled migration; however, it caused a regression
because the pipe was never given a SELinux label.

* src/qemu/qemu_migration.c (doTunnelMigrate): Label outgoing pipe.

The bufferOffset has been initialized to zero in virNetMessageEncodePayloadRaw(),
so, we use bufferLength to represent the length of message which is going to be
sent to client side.

* docs/drvqemu.html.in: Fix typo.
* src/libvirt.c (virDomainCreateXML, virDomainCreateWithFlags):
Likewise.

From: Matthias Bolte <matthias.bolte@googlemail.com>
Tested-by: NJim Fehlig <jfehlig@novell.com>

Matthias provided this patch to fix an issue I encountered in the
generator with APIs containing call-by-ref long type, e.g.

int virDomainMigrateGetMaxSpeed(virDomainPtr domain,
                                unsigned long *bandwidth,
                                unsigned int flags);

Domain listing, basic information retrieval and domain life cycle
management is implemented. But currently the domain XML output
lacks the complete devices section.

The driver uses OpenWSMAN to directly communicate with a Hyper-V
server over its WS-Management interface exposed via Microsoft WinRM.

The driver is based on the work of Michael Sievers. This started in
the same master program project group at the University of Paderborn
as the ESX driver.

See Michael's blog for details: http://hyperv4libvirt.wordpress.com/

Add a generator script to generate the structs and serialization
information for OpenWSMAN.

openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.

This patch updates the man page about virsh schedinfo command.

 - fix typo: 1844674407370955 -> 18446744073709551
 - describe the value 0 of vcpu_period and vcpu_quota parameters
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

When a user migrates a domain by command as

libvirt saves vm's domain XML config in destination host after migration.
But it saves vm->def. Then, the saved XML contains some garbage.

  <domain type='kvm' id='50'>
                     ^^^^^^^^
  ...
   <console type='pty' tty='/dev/pts/5'>
                       ^^^^^^^^^^^^^^^^^

Avoid saving unnecessary things by saving persistent vm definition.

In case we add a new program in the future (we did that in the past and
we are going to do it again soon) current daemon will behave badly with
new client that wants to use the new program. Before the RPC rewrite we
used to just send an error reply to any request with unknown program.
With the RPC rewrite in 0.9.3 the daemon just closes the connection
through which such request was sent. This patch fixes this regression.

If users wants to connect to remote unix socket, e.g.
'qemu+unix://<remote>/system' currently the <remote> part is ignored,
ending up connecting to localhost. Connecting to remote socket is not
supported and user should have used TLS/TCP/SSH instead.

When a detail message is presented, nobody expects prefix 'invalid
argument in' but something more general, like 'invalid argument:'.

On success, the 'sendkey' command does not return any data, so
any data in the reply should be considered to be an error
message

* src/qemu/qemu_monitor_text.c: Treat non-"" reply data as an
  error message for 'sendkey' command

The QEMU 'sendkey' command expects keys to be encoded in the same
way as the RFB extended keycode set. Specifically it wants extended
keys to have the high bit of the first byte set, while the Linux
XT KBD driver codeset uses the low bit of the second byte. To deal
with this we introduce a new keymap 'RFB' and use that in the QEMU
driver

* include/libvirt/libvirt.h.in: Add VIR_KEYCODE_SET_RFB
* src/qemu/qemu_driver.c: Use RFB keycode set instead of XT KBD
* src/util/virkeycode-mapgen.py: Auto-generate the RFB keycode
  set from the XT KBD set
* src/util/virkeycode.c: Add RFB keycode entry to table. Add a
  verify check on cardinality of the codeOffset table

The default is 4, not 0.

This API labels all sockets created until ClearSocketLabel is called in
a way that a vm can access them (i.e., they are labeled with svirt_t
based label in SELinux).

The APIs are designed to label a socket in a way that the libvirt daemon
itself is able to access it (i.e., in SELinux the label is virtd_t based
as opposed to svirt_* we use for labeling resources that need to be
accessed by a vm). The new name reflects this.

When virStreamAbort is called on a stream that has not been used yet,
quite confusing error is returned: "this function is not supported by
the connection driver". Let's just ignore such streams as there's
nothing to abort anyway.

If migration failed on source daemon, the migration is automatically
canceled by the daemon itself. Thus we don't need to call
virDomainMigrateConfirm3(cancelled=1). Calling it doesn't cause any harm
but the resulting error message printed in logs may confuse people.

Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.

This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.

* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.

Changing the current vm, and writing that change to the file
system, all before a new qemu starts, is risky; it's hard to
roll back if starting the new qemu fails for some reason.
Instead of abusing vm->current_snapshot and making the command
line generator decide whether the current snapshot warrants
using -loadvm, it is better to just directly pass a snapshot all
the way through the call chain if it is to be loaded.

This frees up the last use of snapshot->def->active for qemu's
use, so the next patch can repurpose that field for tracking
which snapshot is current.

* src/qemu/qemu_command.c (qemuBuildCommandLine): Don't use active
field of snapshot.
* src/qemu/qemu_process.c (qemuProcessStart): Add a parameter.
* src/qemu/qemu_process.h (qemuProcessStart): Update prototype.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainSaveImageStartVM, qemuDomainObjStart)
(qemuDomainRevertToSnapshot): Likewise.
(qemuDomainSnapshotSetCurrentActive)
(qemuDomainSnapshotSetCurrentInactive): Delete unused functions.

https://bugzilla.redhat.com/show_bug.cgi?id=727709
mentions that if qemu fails to create the snapshot (such as what
happens on Fedora 15 qemu, which has qmp but where savevm is only
in hmp, and where libvirt is old enough to not try the hmp fallback),
then 'virsh snapshot-list dom' will show a garbage snapshot entry,
and the libvirt internal directory for storing snapshot metadata
will have a bogus file.

This fixes the fallout bug of polluting the snapshot-list with
garbage on failure (the root cause of the F15 bug of not having
fallback to hmp has already been fixed in newer libvirt releases).

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Allocate
memory before making snapshot, and cleanup on failure.  Don't
dereference NULL if transient domain exited during snapshot creation.

* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
  clang warning.

Detected by ccc-analyzer:

libvirt.c:4277:5: warning: Value stored to 'ret' is never read
    ret = domain->conn->driver->domainMigrateConfirm3
    ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
  clang warning.

Detected by ccc-analyzer:

  CC     libvirt_driver_qemu_la-qemu_migration.lo
qemu/qemu_migration.c:2046:5: warning: Value stored to 'ret' is never read
    ret = qemuMigrationConfirm(driver, sconn, vm,
    ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The VIR_TEST_DEBUG and VIR_TEST_VERBOSE env vars did not work
because we replaced 'environ' with 'newenv'. Simply calling
virTestGetDebug/Verbose() before replacing the 'environ' ensures
we have processed the env variables.

The gnutls initialization code opens /dev/urandom and keeps that
FD around for later use. We have code which kills off FDs 3-5
to avoid interfereing with our test case. Move the virInitialize
call before this point, so it kills off the gnutls /dev/urandom
FD which is irrelevant for testing purposes

* tests/commandtest.c: Fix test debugging & make it robust against
  opened FDs

My previous patch 74c75671
introduced a regression by removing TLS initialization from client.

virFileOpenAs takes desired uid:gid as arguments, and not only uses
them for a fork/setuid/setgid when retrying failed open operations,
but additionally always forces the opened file to be owned by the
given uid:gid.

One example of the problems this causes is that, when restoring a
domain from a file that is owned by the qemu user, opening the file
chowns it to root. if dynamic_ownership=1 this is coincidentally
expected, but if dynamic_ownership=0, no existing file should ever
have its ownership changed.

This patch adds an extra check before calling fchown() - it only does
it if O_CREAT was passed to virFileOpenAs() in the openflags.

Signed-off-by: NSteve Hodgson <shodgson@solarflare.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.

Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: NSteve Hodgson <shodgson@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

I was testing a virsh patch, and wanted to see if I had passed the
flags I thought.  But with LIBVIRT_DEBUG in the environment, I just
saw:

14:24:52.359: 15022: debug : virDomainSnapshotNum:15586 : dom=0xc9c180, (VM: name=rhel_6-64, uuid=48f8e8e7-e14f-0e14-02f0-ce71997bdcab),

including a trailing space.  This fixes the issues.

* src/libvirt.c: Log flag parameters, even if currently unused.
(VIR_DOMAIN_DEBUG_0): Drop trailing comma in log.
(VIR_DOMAIN_DEBUG_1): Split guts into...
(VIR_DOMAIN_DEBUG_2): ...new macro.

Knowing whether 'virsh start' will resume a saved image or do
a fresh boot is useful enough to expose via 'virsh list'.

Also, translate the state column.

* tools/virsh.c (cmdList): add --managed-save flag
* tools/virsh.pod (list): Document it.
Based on a suggestion by Miklos Vajna.

* src/qemu/qemu_monitor_json.c: Handle error "CommandNotFound" and
  report the error.

* src/qemu/qemu_monitor_text.c: If a sub info command is not found,
  it prints the output of "help info", for other commands,
  "unknown command" is printed.

Without this patch, libvirt always report:

  An error occurred, but the cause is unknown

This patch was adapted from a patch by Osier Yang <jyang@redhat.com> to
break out detection of unrecognized text monitor commands into a separate
function.
Signed-off-by: NAdam Litke <agl@us.ibm.com>

* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Fix typo.
* src/conf/domain_event.c (virDomainEventDispatchMatchCallback):
Likewise.
* daemon/libvirtd.c (daemonRunStateInit): Likewise.
* src/lxc/lxc_container.c (lxcContainerChildMountSort): Likewise.
* src/util/virterror.c (virCopyError, virRaiseErrorFull): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprSound): Likewise.

Introduced by 241cbc13, pushed under urgent rule.