This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: NYi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Add interfaces monitor group to support operations such
as GetID, SetID, Remove, SetAlloc, etc.

Implement the internal virResctrlMonitorGetStats to fetch all
the statistical data and the virResctrlMonitorGetCacheOccupancy
in order to fetch the cache specific "llc_occupancy" value.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for creating the resource monitoring group according
to '@virResctrlMonitor->path'.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for adding task PID to the monitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for resctrl monitor to determine the path.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Cache Monitoring Technology (aka CMT) provides the capability
to report cache utilization information of system task.

This patch introduces the concept of resctrl monitor through
data structure virResctrlMonitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.

Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We will need to extract current cgroup v1 implementation into separate
backend because there will be new cgroup v2 implementation and both will
have to co-exist.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This will be required once cgroup v2 is introduced.  The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.

In order to use virCgroupNewSelf we need to create all the remaining
data files:

    - {name}.cgroups represents /proc/cgroups, it is a list of cgroup
      controllers compiled into kernel

    - {name}.self.cgroup represents /proc/self/cgroup, it describes
      cgroups to which the process belongs

For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.

The host capability of the two monitors is also introduced
in this patch.

For CMT, the host capability is shown like:
  <host>
  ...
    <cache>
      <bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
        <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
      </bank>
      <monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
        <feature name='llc_occupancy'/>
      </monitor>
    </cache>
    ...
  </host>

For MBM, the capability is shown like this:
  <host>
    ...
    <memory_bandwidth>
      <node id='1' cpus='6-11'>
        <control granularity='10' min ='10' maxAllocs='4'/>
      </node>
      <monitor maxMonitors='176'>
        <feature name='mbm_total_bytes'/>
        <feature name='mbm_local_bytes'/>
      </monitor>
    </memory_bandwidth>
    ...
  </host>
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Functions that deal with virPCIDeviceAddress exclusively
belong to util/virpci.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Instead of duplicating the code from virGet{User,Group}IDByName(), which are
static anyway, extend those functions to accept NULL pointers for the result and
a boolean for controlling the error reporting.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: NShi Lei <shi_lei@massclouds.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

It's a better fit than conf/domain_conf.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

The corresponding structs are declared there.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function is called on a virDomainDeviceInfo, so it
should be declared along with it.

Moving this function requires moving and making public
virDomainDeviceCCWAddressIsValid() as well, but that's
perfectly fine since the same reasoning above also
applies to it, due to virDomainDeviceCCWAddress being
(correctly) declared in device_conf.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's used in virDomainDeviceInfo, which makes
domain_conf the wrong place to declare it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Just like a few commits earlier, checking for pool source
duplicates and unlocking pools list afterwards is a buggy
pattern. The check must go into virStoragePoolObjAssignDef.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Even though we do some checking it is not as thorough as it
should be. We already have virStoragePoolObjIsDuplicate but the
way we use it is a typical TOCTOU. Imagine two threads trying to
define two pools with the same name but different UUIDs. With the
current code neither of them finds a duplicate and thus proceed
to virStoragePoolObjAssignDef where only names are compared.
Therefore both threads succeed which is obviously wrong.

We should check for duplicates where we care for them.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Turn

  virPCIDeviceAddressIsEmpty()
  virDeviceInfoPCIAddressIsWanted()
  virDeviceInfoPCIAddressIsPresent()

from inline functions to regular functions.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It was found that in cases with host devices virProcessKillPainfully
might be able to send signal zero to the target PID for quite a while
with the process already being gone from /proc/<PID>.

That is due to cleanup and reset of devices which might include a
secondary bus reset that on top of the actions taken has a 1s delay
to let the bus settle. Due to that guests with plenty of Host devices
could easily exceed the default timeouts.

To solve that, this adds an extra delay of 2s per hostdev that is associated
to a VM.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

Introduce an API to allow setting of the MBA from domain XML.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce an API that will traverse the memory bandwidth data calling
a callback function for each defined bandwidth entry.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Some functions in virresctrl are for CAT only, while some of other
functions are for resource allocation, not just CAT. So change
their names to reflect the reality.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit 8f802c6d.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 3251fc9c.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The same code would be used for storage pools and domain disks.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Explicitly call virJSONInitialize at startup of the libvirt daemon so
that we are sure that the symbols in the compat library are properly
loaded. This will prevent any random failure from happening later on
when the daemon would want to use the JSON parser.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

With 'switch' we can utilize the compile time enum checks which we can't
rely on with plain 'if' conditions.
Signed-off-by: NShi Lei <shilei.massclouds@gmx.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

To allow checking whether a storage source points to the same location
add a helper which checks the relevant fields. This will allow replacing
a similar check done by formatting the command line arguments for
qemu-like syntax.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>