Currently if the URI passed to virConnectOpen* is NULL, then we

 - Look for LIBVIRT_DEFAULT_URI env var
 - Probe for drivers

This changes it so that

 - Look for LIBVIRT_DEFAULT_URI env var
 - Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
 - Probe for drivers

Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".

tools/virsh.c: (use "--config", and "--persistent" is
    alias of "--config" now).
    cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
    cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
    cmdDetachInterface, cmdAttachDisk, cmdDetachDisk

toos/virsh.pod: Update docs of the changed commands, and
    add some missed docs for "--config" (detach-interface,
    detach-disk, and detach-device).

The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone.  And virsh is now useful for setting memory in units other
than KiB.

* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.

Now can now do:

virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M

to get both interfaces to resize to 10MiB.  The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.

The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.

* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.

Just because our public API has a typo doesn't mean that virsh
has to keep the typo.

* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.

Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.

Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.

* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.

In the past, we have created some virsh options with less-than-stellar
names.  For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output.  This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.

I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!

* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.

CPU0:
	cpu_time   88.231593093 seconds
CPU1:
	cpu_time   123.613341883 seconds
Total:
	cpu_time   211.844934976 seconds
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Now virsh can call virDomainBlockRebase.

* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.

The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.

* tools/virsh.pod: update wiping algorithms docs.
Signed-off-by: NAlex Jia <ajia@redhat.com>

No content changes, just breaking long lines.

One could use it to eject, insert, or update media of the CDROM
or floppy drive. See the documentation for more details.

This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.

The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.

This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.

* tools/console.c:
        - add support for flag passthrough
* tools/console.h:
        - modify function prototypes to match impl.
* tools/virsh.c:
        - add flag --force for the console command

This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.

Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.

Aditionally --persistent and/or --transient may be specified to filter
the output of domains.

Commit fad5cd21 introduced option to
display domain's title in the list command output. There was a mistake
in the virsh man page example for this command stating --note instead of
--title.

When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others.  But bytes and iops should
be relatively independent.  Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.

* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings.  Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.

It's dompmsuspend, not suspend-duration.

This patch fixes the domain modification impact flags for tie virsh
desc command to match the new semantics and fix the docs to match
actual behavior.

This allows virsh to use the new VIR_DOMAIN_DESTROY_GRACEUL flag for
virDomainDestroyFlags.

This patch extends "virsh attach-disk" command so that
we can specify "rawio" attribute.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

This patch adds a new command "desc" to show and modify titles and
description for the domains using the new API.

This patch also adds a new flag for the "list" command to show titles in
the domain list, to allow easy identification of VMs by storing a short
description.

Example:
virsh # list --title
 Id Name                 State      Title
 -----------------------------------------------
   0 Domain-0             running    Mailserver 1
   2 fedora               paused

This command lists all disk devices with errors

under new command "dompmsuspend"

Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.

Expose the new command via 'virsh vol-resize'.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.

Typo introduced in commit 4e9953a4, and remained in 6fba577e.

* tools/virsh.pod (snapshot-create): Fix pod error.

to cmdSnapshotCreate and cmdSnapshotCreateAs.

Extend the 'shutdown' and 'reboot' methods so that they both
accept a new argument

    --mode acpi|agent

* tools/virsh.c: New args for shutdown/reboot
* tools/virsh.pod: Document new args

Other virsh domifXXX commands can accept target name
as a parameter to specify interface. From viewpoint of
consistency, virsh domif-getlink command should accept
target name as a parameter. This patch achieves this.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Disk "type" and "device" are generally interesting stuff the
user may want to known, too. To not break any scripts which
parsed the output field, a new option "--details" is introduced
to output the two introduced fields.

Just like command "domblklist", the command extracts "type",
"source", "target", "model", and "MAC" of all virtual interfaces
from domain XML (live or persistent).

The above option helps to differentiate between implicit and explicit
interface pools.

When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default.  But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.

https://bugzilla.redhat.com/show_bug.cgi?id=767104

* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.  Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.

Add a new command domiftune to get/set interface parameters.

* tools/virsh.c: implement the new command
* tools/virsh.pod: documentation of the new command

Virsh's echo command looks not having any relations with domains and its
description should go into the generic commands section instead of the
domain commands section (current).

Virsh's send-key command manipulates domains and its description should
go into the domain commands section instead of generic commands section
(current).

This patch alters saving code, so we can report progress
and allow cancel via ^C.

This patch alters saving code, so we can report progress
and allow cancel via ^C.