- 18 10月, 2013 11 次提交
-
-
-
由 Wang Yufei 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1019053 When we migrate vms concurrently, there's a chance that libvirtd on destination assigns the same port for different migrations, which will lead to migration failure during prepare phase on destination. So we use virPortAllocator here to solve the problem. Signed-off-by: NWang Yufei <james.wangyufei@huawei.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Michal Privoznik 提交于
In fact, the suffix should be _QUIET not _QUIT to stress the fact, that no OOM error is reported on error. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Christophe Fergeau 提交于
netcfStateInitialize() initializes the driverState variable, and when netcfStateCleanup is called, it will call virReportError() if driverState is NULL. This is not consistent with what other state objects are doing, they return -1 without reporting an error in such cases. See also https://www.redhat.com/archives/libvir-list/2013-October/msg00809.html: On Thu, Oct 17, 2013 at 01:40:19PM +0100, Daniel P. Berrange wrote: > We don't want virStateCleanup to skip execution if virStateInitialize > has failed though - every callback in virStateCleanup should be written > to be safe if its corresponding init function hasn't run.
-
由 Zhou Yimin 提交于
Introduced by 7b87a3 When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT, I got error like: "libvirt: XML-RPC error : internal error: domain event 0 not registered". Then I add the following code, it fixed. Signed-off-by: NZhou Yimin <zhouyimin@huawei.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Chen Hanxiao 提交于
If we fail to get domain, we had to judge whether it's null or not when doing 'cleanup'. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
由 John Ferlan 提交于
The header definition didn't match the function declaration, so adjusted header to reflect the definition. Found during a Coverity build where STATIC_ANALYSIS is enabled resulting in the internal.h adding __nonnull__ handling to arguments. Commit '6d264c91' added support for the qemuMonitorJSONDrivePivot() and commit 'fbc3adc9' added a corresponding test which ended up triggering the build failure which I didn't notice until today!
-
由 Chen Hanxiao 提交于
'--print-xml' option is very useful for doing some test. But we had to specify a real domain for it. This patch could enable us to specify a fake domain when using --print-xml option. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Geoff Hickey 提交于
Code cleanup: remove explicit NULL comparisons like ptr == NULL and ptr != NULL from the ESX code, replacing them with the simpler ptr and !ptr. Part three of three.
-
由 Geoff Hickey 提交于
Code cleanup: remove explicit NULL comparisons like ptr == NULL and ptr != NULL from the ESX code, replacing them with the simpler ptr and !ptr. Part two of three.
-
由 Geoff Hickey 提交于
Code cleanup: remove explicit NULL comparisons like ptr == NULL and ptr != NULL from the ESX code, replacing them with the simpler ptr and !ptr. Part one of three.
-
- 17 10月, 2013 6 次提交
-
-
由 Daniel P. Berrange 提交于
QEMU has support for SASL auth for SPICE guests, but libvirt has no way to enable it. Following the example from VNC where it is globally enabled via qemu.conf Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Michal Privoznik 提交于
The last argument of memmove is the amount of bytes to be moved. The amount is in Bytes. We are moving some void pointers around. However, since sizeof(void *) is not Byte on any architecture, we've got the arithmetic wrong.
-
由 Brian Candler 提交于
This patch improves the error checking in the LOCAL_PEERCRED version of virNetSocketGetUNIXIdentity, used by FreeBSD and Mac OSX. 1. The error return paths now correctly unlock the socket. This is implemented in exactly the same way as the SO_PEERCRED version, using "goto cleanup" 2. cr.cr_ngroups is initialised to -1, and cr.cr_ngroups is checked for negative and overlarge values. This means that if the getsockopt() call returns success but doesn't actually update the xucred structure, this is now caught. This happened previously when getsockopt was called with SOL_SOCKET instead of SOL_LOCAL, prior to commit 5a468b38, and resulted in random uids being accepted. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Chen Hanxiao 提交于
s/it's/its Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
由 Giuseppe Scrivano 提交于
prevent aclocal from preferring .m4 files under m4/ over the version provided by gnulib, by using only one directory. I have noticed this after './configure --help' gave me two different versions of "--enable-threads". This was caused by aclocal that preferred the version of lock.m4 provided by autopoint instead of using the newer version distributed with gnulib. Having two different directories made sense back when we checked gnulib files into libvirt.git, but that was ages ago. Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
The RNG grammar did not allow arbitrary interleaving, which makes it harder than necessary to create a new pool from handwritten XML. * docs/schemas/storagepool.rng: Allow interleaving. * tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave. * tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 16 10月, 2013 15 次提交
-
-
由 Eric Blake 提交于
We forgot to document several pool types. * docs/formatstorage.html.in: Add docs for scsi, mpath, rbd, and sheepdog. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Christophe Fergeau 提交于
-
由 Osier Yang 提交于
<...> /* Size of message length field. Not counted in VIR_NET_MESSAGE_MAX * and VIR_NET_MESSAGE_INITIAL. */ const VIR_NET_MESSAGE_LEN_MAX = 4; </...> However, msg->bufferLength includes the length word. The wrong checking was introduced by commit e914dcfd. * src/rpc/virnetmessage.c: - Correct the checking in virNetMessageEncodePayloadRaw - Use a new variable to track the new payload length in virNetMessageEncodePayloadRaw
-
由 Daniel P. Berrange 提交于
The recent patch series proposing the addition of PPC little endian arch support to Linux defines new arch names 'ppcle' and 'ppc64le': https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-August/109908.html This just makes libvirt know about these arch names, so it doesn't immediately trip up if it seems these new names from uname. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
A typo in the setup of NBD backed filesystems meant the /dev/nbdN device would not be added to the cgroups device ACL. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To facilitate debugging, add some more logging to LXC cgroup devices ACL setup. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Pranavkumar Sawargaonkar 提交于
Add qemu AArch64 capabilities schemeta in caps-qemu-kvm.xml. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org> (crobinso: add aarch64 to schema arch list)
-
由 Pranavkumar Sawargaonkar 提交于
Implement the bare minimal sysinfo for AArch64 platforms by reading the CPU models from /proc/cpuinfo. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
由 Pranavkumar Sawargaonkar 提交于
CPU "parser" for AArch64. Showing cputopology in arm64 linux is work-in-progress so for now all AArch64 cpus belong to same socket (like PPC). Also we parse BogoMIPS same like arm 32bit. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
由 Pranavkumar Sawargaonkar 提交于
Adding CPU encoder/decoder for AArch64. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org> (crobinso: fix for recent libvirt Ptr refactoring)
-
由 Pranavkumar Sawargaonkar 提交于
Adding AArch64(ARMv8 64bit) to the current list of valid architectures. For now, AArch64 name would imply AArch64 LE mode only. In future, we might have separate names for AArch64 LE and BE. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
由 Dusty Mabe 提交于
This should resolve: https://bugzilla.redhat.com/show_bug.cgi?id=924672 For BZ 924672 the problem stems from the fact that thin pool logical volume devices show up in /sbin/lvs output just like normal logical volumes do. Libvirt incorrectly assumes they are just normal logical volumes and that they will have a corresponding /dev/vgname/lvname device that has been created by udev and tries to use this device. To illustrate here is an example of the /dev/vgname/ directory and the lvs output for a normal lv, thin lv, and thin pool: LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert lv vgguests -wi-a---- 1.00g pool vgguests twi-a-tz- 11.00g 0.00 thinlv vgguests Vwi-a-tz- 1.00g pool 0.00 total 0 lrwxrwxrwx. 1 root root 7 Oct 8 19:35 lv -> ../dm-7 lrwxrwxrwx. 1 root root 7 Oct 8 19:37 thinlv -> ../dm-6 This patch modifies virStorageBackendLogicalMakeVol() to ignore thin pool devices.
-
由 Michal Privoznik 提交于
Some ancient gcc fails to see the variables are initialized in a separate function and a false positive is produced: cc1: warnings being treated as errors conf/domain_conf.c: In function 'virDomainChrGetDomainPtrs': conf/domain_conf.c:10342: error: 'arrVar' may be used uninitialized in this function [-Wuninitialized] conf/domain_conf.c:10343: error: 'cntVar' may be used uninitialized in this function [-Wuninitialized] conf/domain_conf.c: In function 'virDomainChrInsert': conf/domain_conf.c:10362: error: 'arrPtr' may be used uninitialized in this function [-Wuninitialized] conf/domain_conf.c:10363: error: 'cntPtr' may be used uninitialized in this function [-Wuninitialized] conf/domain_conf.c: In function 'virDomainChrRemove': conf/domain_conf.c:10374: error: 'arrPtr' may be used uninitialized in this function [-Wuninitialized] conf/domain_conf.c:10375: error: 'cntPtr' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 15 10月, 2013 8 次提交
-
-
由 Peter Krempa 提交于
Avoid a line exceeding 80 characters and change argument alignment in two error messages.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
These return boolean results.
-
由 Peter Krempa 提交于
Use virCPUx86DataIterator and virCPUx86DataIteratorInit.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-