- 29 2月, 2012 9 次提交
-
-
由 D. Herrendoerfer 提交于
This code adds a netlink event interface to libvirt. It is based upon the event_poll code and makes use of it. An event is generated for each netlink message sent to the libvirt pid. Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
-
由 Martin Kletzander 提交于
In qemu there are 2 cpu models (cpu64-rhel5 and cpu64-rhel6) not supported by libvirt. This patch adds the support with the flags specifications from /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf The only difference is that AMD-specific features are removed so the processor type is not vendor-specific. Those features are either emulated or ignored by qemu if host CPU doesn't support them.
-
由 Martin Kletzander 提交于
Just a cleanup of commit 32f881c6.
-
由 Jiri Denemark 提交于
This hook is called during the Prepare phase on destination host and may be used for changing domain XML.
-
由 Jiri Denemark 提交于
Hooks may now be used as filters.
-
由 Michal Privoznik 提交于
* src/storage/storage_driver.c (storageVolumeWipeInternal): s/ pfitzner33/pfitzner33/.
-
由 Jiri Denemark 提交于
Bug introduced by commit eda0fc7a.
-
由 Alex Jia 提交于
* src/util/event_poll.c: (virEventPollRunOnce): s/imeout/timeout/. Signed-off-by: NAlex Jia <ajia@redhat.com>
-
由 Alex Jia 提交于
* src/storage/storage_driver.c (storageVolumeWipeInternal): s/shneier/schneier. http://code.google.com/p/diskscrub/Signed-off-by: NAlex Jia <ajia@redhat.com>
-
- 28 2月, 2012 9 次提交
-
-
由 Laine Stump 提交于
This call to virDomainDeviceDefParse is both unnecessary (since it will again be called at the top of the immediately following if(), and if not there, then at the top of the if following that), but it also creates a leak of one virDomainDeviceDef and one [whatever type of device the DeviceDef is pointing to; probably a virDomainDiskDef] in the case that the function has been called with VIR_DOMAIN_DEVICE_MODIFY_CONFIG (the second parse will overwrite the devicedef that was just created).
-
由 Osier Yang 提交于
For any disk controller model which is not "lsilogic", the command line will be like: -drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \ -device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\ drive=drive-scsi0-0-3-0,id=scsi0-0-3-0 The relationship between the libvirt address attrs and the qdev properties are (controller model is not "lsilogic"; strings inside <> represent libvirt adress attrs): bus=scsi<controller>.0 channel=<bus> scsi-id=<target> lun=<unit> * src/qemu/qemu_command.h: (New param "virDomainDefPtr def" for function qemuBuildDriveDevStr; new param "virDomainDefPtr vmdef" for function qemuAssignDeviceDiskAlias. Both for virDomainDiskFindControllerModel's use). * src/qemu/qemu_command.c: - New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom. For virDomainDiskFindControllerModel's use, if the disk bus is "scsi" and the controller model is not "lsilogic", "target" is one part of the alias name. - According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr * src/qemu/qemu_hotplug.c: - Changes to be consistent with declarations of qemuAssignDeviceDiskAlias qemuBuildDriveDevStr, and qemuBuildControllerDevStr. * tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args, tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the generated command line.
-
由 Osier Yang 提交于
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
由 Osier Yang 提交于
-
由 Paolo Bonzini 提交于
Adding a new model for virtio-scsi roughly follows the same scheme as the previous patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
KVM will be able to use a PCI SCSI controller even on POWER. Let the user specify the vSCSI controller by other means than a default. After this patch, the QEMU driver will actually look at the model and reject anything but auto, lsilogic and ibmvscsi. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NOsier Yang <jyang@redhat.com>
-
由 Laine Stump 提交于
In qemuDomainAttachNetDevice, the guest's tap interface has only been attached to the bridge if iface_connected is true. It's possible for an error to occur prior to that happening, and previously we would attempt to remove the tap interface from the bridge even if it hadn't been attached.
-
由 Josh Durgin 提交于
QMP commands don't need to be escaped since converting them to json also escapes special characters. When a QMP command fails, however, libvirt falls back to HMP commands. These fallback functions (qemuMonitorText*) do their own escaping, and pass the result directly to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these pre-escaped commands will be escaped again when converted to json, which can result in the wrong arguments being sent. For example, a filename test\file would be sent in json as test\\file. This prevented attaching an image file with a " or \ in its name in qemu 1.0.50, and also broke rbd attachment (which uses backslashes to escape some internal arguments.) Reported-by: NMasuko Tomoya <tomoya.masuko@gmail.com> Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 27 2月, 2012 8 次提交
-
-
由 Peter Krempa 提交于
This patch fixes console corruption, that happens if two concurrent sessions are opened for a single console on a domain. Result of this corruption was that each of the console streams recieved just a part of the data written to the pipe so every console rendered unusable. New helper function for safe console handling is used to establish the console stream connection. This function ensures that no other libvirt client is using the console (with the ability to disconnect consoles of libvirt clients) and that no UUCP style lockfile is placed on the PTY device. * src/qemu/qemu_domain.h - add data structure to domain's private data dealing with console connections * src/qemu/qemu_domain.c: - allocate/free domain's console data structure * src/qemu/qemu_driver.c - use the new helper function for console handling
-
由 Peter Krempa 提交于
This patch adds a set of functions used in creating console streams for domains using PTYs and ensures mutually exclusive access to the PTYs. If mutually exclusive access is not used, two clients may open the same console, which results in corruption on both clients as both of them race to read data from the PTY. Two approaches are used to ensure this: 1) Internal data structure holding open PTYs. This is used internally and enables the user to forcibly terminate another console connection eg. when somebody leaves the console open on another host. 2) UUCP style lock files: This uses UUCP lock files according to the FHS ( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES ) to check if other programs (like minicom) are not using the pty device of the console. This feature is disabled by default and may be enabled using configure parameter --with-console-lock-files=/path/to/lock/file/directory or --with-console-lock-files=auto (which tries to infer the location from OS used (currently only linux). On usual linux systems, normal users may not write to the /var/lock directory containing the locks. This poses problems while in session mode. If the current user has no access to the lockfile directory, check for presence of the file is still done, but no lock file is created. This does NOT result in an error.
-
由 Peter Krempa 提交于
This patch adds another callback to a FDstream object. The original callback is used by the daemon stream driver to handle events. This callback is called if and only if the stream is about to be closed. This might be used to handle cleanup steps after a fdstream exits. This will be used later on in ensuring mutually exclusive access to consoles. * src/fdstream.c: - emit the callback, when stream is being closed - add data structures needed to handle the callback - add function to register callback * src/fdstream.h: - define function prototypes for the callback
-
由 Peter Krempa 提交于
This patch causes the fdstream driver to call the stream event callback if virStreamAbort() is called on a stream using this driver. A remote handler for a stream can only detect changes via stream events, so this event callback is necessary in order to enable a daemon to abort a stream in such a way that the client will see the change. * src/fdstream.c: - modify close function to call stream event callback
-
由 Peter Krempa 提交于
This patch adds a set of flags to be used with the virDomainOpenConsole API call to specify if the user wishes to interrupt an existing console session or just to try open a new one. VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should be opened only if the hypervisor supports mutually exclusive access to console devices VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt existing session and force a creation of a new one.
-
由 Peter Krempa 提交于
This patch changes behavior of virPidFileRead to enable passing NULL as path to the binary the pid file should be checked against to skip this check. This enables using this function for reading files that have same semantics as pid files, but belong to unknown processes.
-
由 Michal Privoznik 提交于
using 'system-wakeup' monitor command. It is supported only in JSON, as we are enabling it if possible. Moreover, this command is available in qemu-1.1+ which definitely has JSON.
-
由 Michal Privoznik 提交于
This API allows a domain which previously called virDomainPMSuspendForDuration() to be woken up.
-
- 25 2月, 2012 3 次提交
-
-
由 Martin Kletzander 提交于
Function xmlParseURI does not remove square brackets around IPv6 address when parsing. One of the solutions is making wrappers around functions working with xmlURI*. This assures that uri->server will be always properly assigned and it doesn't have to be changed when used on some new place in the code. For this purpose, functions virParseURI and virSaveURI were added. These function are wrappers around xmlParseURI and xmlSaveUri respectively. Also there is one new syntax check function to prohibit these functions anywhere else. File changes: - src/util/viruri.h -- declaration - src/util/viruri.c -- definition - src/libvirt_private.syms -- symbol export - src/Makefile.am -- added source and header files - cfg.mk -- added sc_prohibit_xmlURI - all others -- ID name and include fixes
-
由 Daniel P. Berrange 提交于
The /usr/include/python/pyconfig.h file pollutes the global namespace with a huge number of HAVE_XXX and WITH_XXX defines. These change what we detected in our own config.h In particular if you try to build without DTrace, python's headers turn it back on with predictable fail. THe hack to workaround this is to rename WITH_DTRACE to WITH_DTRACE_PROBES to avoid the namespace clash
-
由 Christophe Fergeau 提交于
It's possible to disable SPICE TLS in qemu.conf. When this happens, libvirt ignores any SPICE TLS port or x509 directory that may have been set when it builds the qemu command line to use. However, it's not ignoring the secure channels that may have been set and adds tls-channel arguments to qemu command line. Current qemu versions don't report an error when this happens, and try to use TLS for the specified channels. Before this patch <domain type='kvm'> <name>auto-tls-port</name> <memory>65536</memory> <os> <type arch='x86_64' machine='pc'>hvm</type> </os> <devices> <graphics type='spice' port='5900' tlsPort='-1' autoport='yes' listen='0' ke <listen type='address' address='0'/> <channel name='main' mode='secure'/> <channel name='inputs' mode='secure'/> </graphics> </devices> </domain> generates -spice port=5900,addr=0,disable-ticketing,tls-channel=main,tls-channel=inputs and starts QEMU. After this patch, an error is reported if a TLS port is set in the XML or if secure channels are specified but TLS is disabled in qemu.conf. This is the behaviour the oVirt people (where I spotted this issue) said they would expect. This fixes bug #790436
-
- 24 2月, 2012 2 次提交
-
-
由 Jean-Baptiste Rouault 提交于
This patch adds support for vmx files with empty networkName values (which is the case for vmx generated by Workstation). It also adds support for vmx containing NATed network interfaces. Update test suite accordingly
-
由 Benjamin Cama 提交于
[forwarding this here from RH bug #796732] When creating a network (virsh net-create) with an erroneous XML containing an empty <name> element, the error message is misleading: error: Failed to create network from foo.xml error: missing domain name information It took me a bit of time to figure out that it was the *network* name that was missing (I generate this xml and didn't look at it, first). I realized that the same message is used for missing name when creating a domain, network, or device node.
-
- 23 2月, 2012 3 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=795656 mentions that a graceful destroy request can time out, meaning that the error message is user-visible and should be more appropriate than just internal error. * src/qemu/qemu_driver.c (qemuDomainDestroyFlags): Swap error type.
-
由 Jiri Denemark 提交于
Migrating domains with disks using cache != none is unsafe unless the disk images are stored on coherent clustered filesystem. Thus we forbid migrating such domains unless VIR_MIGRATE_UNSAFE flags is used.
-
由 Jiri Denemark 提交于
-
- 22 2月, 2012 6 次提交
-
-
由 Jiri Denemark 提交于
This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new VIR_ERR_MIGRATION_UNSAFE error code. The error code should be returned whenever migrating a domain is considered unsafe (e.g., it's configured in a way that does not ensure data integrity once it is migrated). VIR_MIGRATE_UNSAFE flag may be used to force migration even though it would normally be considered unsafe and forbidden.
-
由 Michal Privoznik 提交于
AC_CHECK_PROG checks for program in given path. However, if it doesn't exists, [variable] is set to [value-if-not-found]. We don't want this to be the empty string in case of 'modprobe' and 'scrub' as we want to fallback to runtime detection.
-
由 Michal Privoznik 提交于
Despite documentation, if we do fork() parent always returns -1 even if file is accessible. Which is wrong obviously.
-
由 Jean-Baptiste Rouault 提交于
-
由 Peter Krempa 提交于
Clarify the documentation of virConnectListDomains.
-
由 Matthias Bolte 提交于
Adding "Expect:" to the header list stops libcurl from sending a Expect header at all. Before, a dummy Expect header was added that might confuse HTTP proxies and result in HTTP error code 417 being reported.
-