There is an error reset following the function and check for
startupPolicy before that.  Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Ever since virDomainCreateWithFlags() was introduced by de3aadaa
[drivers: add virDomainCreateWithFlags if virDomainCreate exists], the
domain ID retrieved with virDomainGetID() was incorrect for several
drivers after virDomainCreateWithFlags() was called. The API consumer
had to look up the domain anew to retrieve the correct ID.

For the ESX driver, this was fixed in 6139b274 [esx: Update ID after
starting a domain]. For the openvz driver, it was fixed in fd81a097
[openvzDomainCreateWithFlags: set domain id to the correct value]. The
test driver, the OpenNebula driver (removed in the meantime) and the
vbox driver were already updating the domain ID correctly in
domainCreate().

Copy over the ID in qemuDomainCreateWithFlags() to fix this for the qemu
driver, too.

Fixes: de3aadaa ("drivers: add virDomainCreateWithFlags if virDomainCreate exists")
Reported-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Consider the following XML snippet:

    <memory model=''>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
    </memory>

Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virJSONValueObjectCreate only consumes the object on success, so on
failure we must free - from commit id 'f4441017' (found by Coverity).

The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Is necessary to call it from other contexts, such as qemuDomainGetStatsBalloon.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.

This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.

Avoid a large block by tweaking the condition skipping empty drives and
split up the switch containing two branches having different purpose.

The disk source formatting code grew rather ugly and complex and it will
get worse. Extract it into a separated function to contain the mess.

Extract the code so that it can be called from multiple places. This
also removes a tricky fallthrough in the large switch in
qemuBuildNetworkDriveStr.

The function builds also non-uri strings for the various protocols.

Allow using 'ssh' protocol in backing chains and later for disks
themselves.

The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.

For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.

For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.

Purely cosmetic change to be consistent with the other names.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the ccw address set
from the domain definition.

Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Credit goes to Cole Robinson.

Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.

Credit goes to Cole Robinson.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the virtio serial address set
from the domain definition.

Credit goes to Cole Robinson.

Commit 4a585a88 introduced searching QOM device path by alias, let's use it for
memballoon too.  This may speedup the search because in most cases we will find
the correct QOM device path directly by using alias without the need for the
recursion code.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit ce745914 introduced detection of actual video ram sizes to fix migration
if QEMU decide to modify the values provided by libvirt.  This works perfectly
for domains with number of video devices up to two.

If there are more than two video devices in the guest all the secondary devices
in the XML will have the same memory values.  This is because our current code
search for QOM device path only by the device type name and all the secondary
video devices has the same name "qxl".

This patch introduces a new search function that will try to search a QOM device
path using also device's alias if the alias is available. After that it will
fallback to the old recursive code if the alias search found no results.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358728Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Previously, qemuDomainDetachDeviceFlags was doing two things:
handling the job and detaching devices. Now the second part is
in a new function.

This will make splitting up qemuDomainDetachDeviceFlags into two
functions easier.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Previously, qemuDomainAttachDeviceFlags was doing two things:
handling the job and attaching devices. Now the second part is
in a new function.

This change is required to make it possible to test more complex
device attachment situations, like attaching a device to both
config and live at once.

qemuCaps is no longer used anywhere in these functions,
so it can be deleted.

We want to be able to pass a NULL instead of the connection
and use this function in tests. To achieve this, the virConnectPtr
is passed instead of virDomainPtr, and the driver is a new separate
parameter.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since return code is checked globally at the end of the function, let's
make sure that we set it correctly at any point.

This fixes a regression introduced in commit 0aa19f35 where the first
command to eject changeable media would fail unconditionally.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.

To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.

USB disks, redirected devices, host devices and serial devices
are supported.

Automatically assign addresses to USB devices.

Just like reserving, this is only done for newly defined domains.

https://bugzilla.redhat.com/show_bug.cgi?id=1215968

Check if they fit on the USB controllers the domain has,
and error out if two devices try to use the same address.

Resolves a CI test integration failure with a RHEL6/Centos6 environment.

In order to use a LUKS encrypted device, the design decision was to
generate an encrypted secret based on the master key. However, commit
id 'da86c6c2' missed checking for that specifically.

When qemuDomainSecretSetup was implemented, a design decision was made
to "fall back" to a plain text secret setup if the specific cipher was
not available (e.g. virCryptoHaveCipher(VIR_CRYPTO_CIPHER_AES256CBC))
as well as the QEMU_CAPS_OBJECT_SECRET. For the luks encryption setup
there is no fall back to the plaintext secret, thus if that gets set
up by qemuDomainSecretSetup, then we need to fail.

Also, while the qemuxml2argvtest has set the QEMU_CAPS_OBJECT_SECRET
bit, it didn't take into account the second requirement that the
ability to generate the encrypted secret is possible. So modify the
test to not attempt to run the luks-disk if we know we don't have
the encryption algorithm.

A post push realization that the boolean should be set inside the condition