The virtstoraged daemon will be responsible for providing the storage API
driver functionality. The storage driver is still loaded by the main
libvirtd daemon at this stage, so virtstoraged must not be running at
the same time.
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virtinterfaced daemon will be responsible for providing the interface API
driver functionality. The interface driver is still loaded by the main
libvirtd daemon at this stage, so virtinterfaced must not be running at
the same time.
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virtnetworkd daemon will be responsible for providing the network API
driver functionality. The network driver is still loaded by the main
libvirtd daemon at this stage, so virtnetworkd must not be running at
the same time.
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virtsecretd daemon will be responsible for providing the secret API
driver functionality. The secret driver is still loaded by the main
libvirtd daemon at this stage, so virtsecretd must not be running at
the same time.
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The libvirtd daemon provides the traditional libvirt experience where
all the drivers are in a single daemon, and is accessible over both
local UNIX sockets and remote IP sockets.

In the new world we're having a set of per-driver daemons which will
primarily be accessed locally via their own UNIX sockets.

We still, however, need to allow for case of applications which will
connect to libvirt remotely. These remote connections can be done as
TCP/TLS sockets, or by SSH tunnelling to the UNIX socket.

In the later case, the old libvirt.so clients will only know about
the path to the old libvirtd socket /var/run/libvirt/libvirt-sock,
and not the new driver sockets /var/run/libvirt/virtqemud-sock.

It is also not desirable to expose the main driver specific daemons
over IP directly to minimize their attack service.

Thus the virtproxyd daemon steps into place, to provide TCP/TLS sockets,
and back compat for the old libvirtd UNIX socket path(s). It will then
forward all RPC calls made to the appropriate driver specific daemon.

Essentially it is equivalent to the old libvirtd with absolutely no
drivers registered except for the remote driver (and other stateless
drivers in libvirt.so).

We could have modified libvirtd so none of the drivers are registed
to get the same end result. We could even add a libvirtd.conf parameter
to control whether the drivers are loaded to enable users to switch back
to the old world if we discover bugs in the split-daemon model. Using a
new daemon though has some advantages

 - We can make virtproxyd and the virtXXXd per-driver daemons all
   have "Conflicts: libvirtd.service" in their systemd unit files.
   This will guarantee that libvirtd is never started at the same
   time, as this would result in two daemons running the same driver.
   Fortunately drivers use locking to protect themselves, but it is
   better to avoid starting a daemon we know will conflict.

 - It allows us to break CLI compat to remove the --listen parameter.
   Both listen_tcp and listen_tls parameters in /etc/libvirtd/virtd.conf
   will default to zero. Either TLS or TCP can be enabled exclusively
   though virtd.conf without requiring the extra step of adding --listen.

 - It allows us to set a strict SELinux policy over virtproxyd. For
   back compat the libvirtd policy must continue to allow all drivers
   to run. We can't easily give a second policy to libvirtd which
   locks it down. By introducing a new virtproxyd we can set a strict
   policy for that daemon only.

 - It gets rid of the weird naming of having a daemon with "lib" in
   its name. Now all normal daemons libvirt ships will have "virt"
   as their prefix not "libvirt".

 - Distros can more easily choose their upgrade path. They can
   ship both sets of daemons in their packages, and choose to
   either enable libvirtd, or enable the per-driver daemons and
   virtproxyd out of the box. Users can easily override this if
   desired by just tweaking which systemd units are active.

After some time we can deprecate use of libvirtd and after some more
time delete it entirely, leaving us in a pretty world filled with
prancing unicorns.

The main downside with introducing a new daemon, and with the
per-driver daemons in general, is figuring out the correct upgrade
path.

The conservative option is to leave libvirtd running if it was
an existing installation. Only use the new daemons & virtproxyd
on completely new installs.

The aggressive option is to disable libvirtd if already running
and activate all the new daemons.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Prepare for reusing libvirtd augeas defintions with other daemons by
making the config parameters for IP sockets conditionally defined by
the make rules.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Prepare for reusing libvirtd config to create other daemons by making
the config parameters for IP sockets conditionally defined by the make
rules.

The main libvirtd daemon will retain IP listen ability, but all the
driver specific daemons will be local UNIX sockets only. Apps needing
IP connectivity will connect via the libvirtd daemon which will proxy
to the driver specfic daemon.
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The current make rules are inconsistent about which directory the
augeas test files are created in. Put them all in the same dir as
their source.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virt-login-shell binary is a setuid program that takes
no arguments. When invoked it looks at the invoking uid,
resolves it to a username, and finds an LXC guest with the
same name. It then starts the guest and runs the shell in
side the namespaces of the container.

Given this set of tasks the virt-login-shell binary needs
to connect to libvirtd, make various other libvirt API calls.
This is a problem for setuid binaries as various libraries
that libvirt.so links to are not safe. For example, they have
constructor functions which execute an unknown amount of code
that can be influenced by env variables.

For this reason virt-login-shell doesn't use libvirt.so,
but instead links to a custom, cut down, set of source files
sufficient to be a local client only.

This introduces a problem for integrating glib2 into libvirt
though, as once integrated, there would be no way to build
virt-login-shell without an external dependancy on glib2 and
this is definitely not setuid safe.

To resolve this problem, we split the virt-login-shell binary
into two parts. The first part is setuid and does almost
nothing. It simply records the original uid+gid, and then
invokes the virt-login-shell-helper binary. Crucially when
it does this it completes scrubs all environment variables.
It is thus safe for virt-login-shell-helper to link to the
normal libvirt.so. Any things that constructor functions
do cannot be influenced by user control env vars or cli
args.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

All other examples are organized using the either the format/
or the format/category/ hierarchy already, and grouping all
C programs together removes the last remaining outliers.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Most C examples live in their own directory, which seems a
bit unnecessary especially considering that all virt-admin
related examples share a single admin/ directory. Reorganize
non-admin C examples in two categories: domain/ for those
that act on a domain, and misc/ for everything else.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

The Travis CI system uses Docker containers for its build environment.
These are pre-built and hosted under quay.io/libvirt so that developers
can use them for reproducing problems locally.

Getting the right Docker command syntax to use them, however, is not
entirely easy. This patch addresses that usability issue by introducing
some make targets. To run a simple build (aka 'make all') using the
Fedora 28 container:

   make ci-build@fedora-28

To also run unit tests

   make ci-check@fedora-28

This is just syntax sugar for calling the previous command with a
custom make target

   make ci-build@fedora-28 CI_MAKE_ARGS="check"

To do a purely interactive build it is possible to request a shell

   make ci-shell@fedora-28

To do a MinGW build, it is currently possible to use the fedora-rawhide
image and request a different configure script

   make ci-build@fedora-rawhide CI_CONFIGURE=mingw32-configure

It is also possible to do cross compiled builds via the Debian containers

   make ci-build@debian-9-cross-s390x

In all cases the GIT source tree is cloned locally into a 'ci-tree/src'
sub-directory which is then exposed to the container at '/src'. It is
setup to use a separate build directory so the build takes place in a
subdir '/src/build'. A source tree build can be requested instead
by passing an empty string CI_VPATH= arg to make.

The make rules are kept in a standalone file that is included into the
main Makefile.am, so that it is possible to run them without having to
invoke autotools first.

It is neccessary to disable the gnulib submodule commit check because
this fails due to the way we have manually cloned submodule repos as
primary git repos with their own .git directory, instead of letting
git treat them as submodules in the top level .git directory.

  make[1]: Entering directory '/src/build'
  fatal: Not a valid object name origin
  fatal: run_command returned non-zero status for .gnulib
  .
  maint.mk: found non-public submodule commit
  make: *** [/src/maint.mk:1448: public-submodule-commit] Error 1
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

libvirt.org/search.php drops into some kind of screen which I guess
is supposed to show a search bar with options, but presently for me
renders as nothing but the following text:

Search the documentation on Libvirt.org

The search service indexes the libvirt APIs and documentation as well as the libvir-list@redhat.com mailing-list archives. To use it simply provide a set of keywords:

The main page search bar now redirects to google, this page is broken,
I say we just remove it and move on.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Our ChangeLog is generated by basically redirecting the output
of 'git log' into it so, as can be expected, it has only gotten
bigger as development has progressed. As of today, its size has
reached pretty much comical levels:

  $ du -sk ChangeLog
  11328 ChangeLog

All of that for information *literally nobody* cares about: end
users and distro maintainers have proper release notes lovingly
compiled for them, while developers peruse the history either by
calling 'git log' directly or through their favorite $EDITOR's
git integration.

Replacing the generated ChangeLog with a short message pointing
interested parties to the git repository does not only reduce
the size of the unpacked sources from 259904 KiB to 248576 KiB
(~4% saving): from a quick test on my laptop, doing so reduces
the size of the *compressed* release archive from 15140 KiB to
12364 KiB (~18% saving) and also takes the time needed to run
'make distcheck' down from 4:44 to 4:21 (~8% saving).
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Despite the misleading name, these were supposed to be used
with a System V style init; however, none of the platforms we
target is using that kind of init anymore: almost all Linux
distributions have switched to systemd, those that haven't
(such as Gentoo and Alpine) are mostly using OpenRC with
custom init scripts, and the BSDs have been doing their own
thing all along.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

In order to be able to dissect libvirt protocol the wireshark
plugin needs to be registered. So far this plugin registration
code was generated on every build using a script that was copied
over from wireshark's tools/ directory.

This is suboptimal, because the way that plugins register changes
across wireshark releases. Therefore, let's keep the generated
file in the git, put the command line used to generate the file
into a comment and remove the script.

This solution allows us to put different registration mechanism
into one file (under #ifdef-s) and thus compile with wider range
of wireshark releases.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similar to the libvirt.pot, .po files contain line numbers and file
names identifying where in the source a translatable string comes from.
The source locations in the .po files are thrown away and replaced with
content from the libvirt.pot whenever msgmerge is run, so this is not
precious information that needs to be stored in git.

When msgmerge processes a .po file, it will add in any msgids from the
libvirt.pot that were not already present. Thus, if a particular msgid
currently has no translation, it can be considered redundant and again
does not need storing in git.

When msgmerge processes a .po file and can't find an exact existing
translation match, it will try todo fuzzy matching instead, marking such
entries with a "# fuzzy" comment to alert the translator to take a
look and either discard, edit or accept the match. Looking at the
existing fuzzy matches in .po files shows that the quality is awful,
with many having a completely different set of printf format specifiers
between the msgid and fuzzy msgstr entry. Fortunately when msgfmt
generates the .gmo, the fuzzy entries are all ignored anyway. The fuzzy
entries could be useful to translators if they were working on the .po
files directly from git, but Libvirt outsourced translation to the
Fedora Zanata system, so keeping fuzzy matches in git is not much help.

Finally, by default msgids are sorted based on source location. Thus, if
a bit of code with translatable text is moved from one file to another,
it may shift around in the .po file, despite the msgid not itself changing.
If the msgids were sorted alphabetically, the .po files would have
stable ordering when code is refactored.

This patch takes advantage of the above observations to canonicalize
and minimize the content stored for .po files in git. Instead of storing
the real .po files, we now store .mini.po files.

The .mini.po files are the same file format as .po files, but have no
source location comments, are sorted alphabetically, and all fuzzy
msgstrs and msgids with no translation are discarded. This cuts the size
of content in the po directory from 109MB to 19MB.

Users working from a libvirt git checkout who need the full .po files
can run "make update-po", which merges the libvirt.pot and .mini.po
file to create a .po file containing all the content previously stored
in git.

Conversely if a full .po file has been modified, for example, by
downloading new content from Zanata, the .mini.po files can be updated
by running "make update-mini-po". The resulting diffs of the .mini.po
file will clearly show the changed translations without any of the noise
that previously obscured content. Being able to see content changes
clearly actually identified a bug in the zanata python client where it
was adding bogus "fuzzy" annotations to many messages:

  https://bugzilla.redhat.com/show_bug.cgi?id=1564497

Users working from libvirt releases should not see any difference in
behaviour, since the tarballs only contain the full .po files, not the
.mini.po files.

As an added benefit, generating tarballs with "make dist", will no
longer cause creation of dirty files in git, since it won't touch the
.mini.po files, only the .po files which are no longer kept in git.

To avoid creating a single commit 100+MB in size, each language is
minimized separately in a following commit.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This essentially reverts commit <e1019e9e>, which added
an extra step for generating the policy file.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Move the systemd, sysvinit, upstart and sysconfig files into the
src/remote/ directory.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Having a daemon/ directory makes little sense from a code structure
point of view, as 90% of the code that is built into libvirtd already
lives in the src/ directory. The virtlockd and virlogd daemons also live
entirely in src/{locking,logging} directories. This moves the source
code for libvirtd into src/remote/, alongside the client code.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The admin server functionality is a generic concept that should be wired
up into all libvirt daemons, but is currently integrated with the
libvirtd code. Move it all into the src/admin directory to prepare for
broader reuse.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

YouCompleteMe[1] is a vim plugin that implements semantic
code completion using libclang.

For non-trivial projects such as libvirt, the plugin needs
some help figuring out where to find the various header
files: generate its configuration file at configure time
so that the plugin works out of the box.

[1] http://valloric.github.io/YouCompleteMe/

color_coded[1] is a vim plugin that implements semantic
syntax highlighting using libclang.

For non-trivial projects such as libvirt, the plugin needs
some help figuring out where to find the various header
files: generate its configuration file at configure time
so that the plugin works out of the box.

[1] https://github.com/jeaye/color_coded

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A long time ago we imported the keymaps.csv file from GTK-VNC so we
can do conversions between keycode sets. Meanwhile lots of bug fixes
have gone into this CSV file and libvirt hasn't kept in sync. The
keymaps.csv file and associated generator script has been pulled out
of GTK-VNC into a dedicated GIT repo for use as a submodule. This
allows GTK-VNC, SPICE-GTK, QEMU and libvirt to share the same master
database and tools and pushing updates merely requires a submodule
commit update as with gnulib.

The test suite is updated to cover some extra boundary conditions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We want to ignore all files except *.pl in build-aux directory, however
the unignore pattern "!/build-aux/*.pl" doesn't have any effect because
a previous "/build-aux/" pattern ignores the directory itself rather
than individual files in it.

https://bugzilla.redhat.com/show_bug.cgi?id=1439994Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Currently, building the NEWS file involves using a XSLT stylesheet
to extract information from the same HTML file that's used on the
libvirt website.

The process works, but it's quite fiddly in that it requires the
source HTML to be formatted in a very precise way, and a single
missing newline can mess up the resulting plain text considerably.

Moreover, the XSLT stylesheet itself encodes a lot of the details
of converting to plain text in a way that's not necessarily easy
to understand, tweak or fix.

To improve the process, move all existing entries to a new XML
file that contains exactly the information we care about in a
simple structured format, and start generating both the HTML and
plain text versions of the release notes using XSLT stylesheets
that can now afford to be almost trivial.

Provide a simple C example demonstrating the use of both query APIs as
well as setter APIs.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Just like we are running 'virsh self-test' from within our test
suite, we should run 'virt-admin self-test' too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Some of the examples make use of asprintf and strtol functions (to keep
things simple) which are prohibited to use within our code (enforced by
syntax-check). Therefore besides adding some examples, this patch also updates
cfg.mk to exclude examples directory from asprintf and strtol rules, as well as
updates .gitignore to exclude all the new admin binaries created in the
'examples' dir.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Also remove the duplicate build-aux entry from .gitignore.

A new hidden command for virsh that will iterate over
all command groups and commands and print help for every single one.

This involves running vshCmddefOptParse so we can get an error if
one of the command's option structure is invalid.

This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.

Instead of calling xmllint via a shell script, use our virXMLValidator
API to do it directly via libxml.

All the accesses to files outside our build or source directories
are now identified and appended into a file for later processing.
The location of the file that contains all the records can be
controlled via VIR_TEST_FILE_ACCESS env variable and defaults to
abs_builddir "/test_file_access.txt".

The script that will process the access file is to be added in
next commit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>