Update the UML driver to use virReportError instead of the
umlReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.

ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}

V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).

Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory.  Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.

* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory.  Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.

This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:

  <interface type='hostdev' managed='yes'>
    <source>
      <address type='pci' domain='0' bus='0' slot='4' function='3'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
    <address type='pci' domain='0' bus='0' slot='7' function='0'/>
  </interface>

This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.

NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.

Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:

  <interface type='hostdev'>
    <source>
      <address type='usb' bus='0' device='4'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

If the vendor/product form of usb specification is used, type='usb'
is implied:

  <interface type='hostdev'>
    <source>
      <vendor id='0x0012'/>
      <product id='0x24dd'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).

With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.

When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).

In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.

In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.

This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.

There is no other behavioral change created by this patch.

This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633

Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).

Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.

Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.

(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).

A preparatory patch for DHCP snooping where we want to be able to
differentiate between a VM's interface using the tuple of
<VM UUID, Interface MAC address>. We assume that MAC addresses could
possibly be re-used between different networks (VLANs) thus do not only
want to rely on the MAC address to identify an interface.

At the current 'final destination' in virNWFilterInstantiate I am leaving
the vmuuid parameter as ATTRIBUTE_UNUSED until the DHCP snooping patches arrive.
(we may not post the DHCP snooping patches for 0.9.9, though)

Mostly this is a pretty trivial patch. On the lowest layers, in lxc_driver
and uml_conf, I am passing the virDomainDefPtr around until I am passing
only the VM's uuid into the NWFilter calls.

This patch cleans up return codes in the nwfilter subsystem.

Some functions in nwfilter_conf.c (validators and formatters) are
keeping their bool return for now and I am converting their return
code to true/false.

All other functions now have failure return codes of -1 and success
of 0.

[I searched for all occurences of ' 1;' and checked all 'if ' and
adapted where needed. After that I did a grep for 'NWFilter' in the source
tree.]

Many of these were mentioned by Yuri Chornoivan in:
https://bugzilla.redhat.com/show_bug.cgi?id=669506

* src/esx/esx_vi.c (esxVI_WaitForTaskCompletion): Fix spelling.
* src/conf/netdev_vport_profile_conf.c
(virNetDevVPortProfileParse): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags):
Likewise.
* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): Likewise.
* src/esx/esx_util.c (esxUtil_ResolveHostname): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemBuild): Likewise.
* daemon/libvirtd.conf: Likewise.
* src/util/logging.c (virLogMessage): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineNet): Likewise.
* src/vmx/vmx.c (virVMXFormatEthernet): Likewise.

* src/lxc/lxc_conf.c, src/uml/uml_conf.c,
  src/xen/xen_hypervisor.c: Initialize suspend capabilities
* tests/xencapsdata/*xml: Add empty powermgmt capabilities

* .gnulib: Update to latest, for improved syntax-check.
* src/lxc/lxc_container.c (includes): Drop unused include.
* src/network/bridge_driver.c: Likewise.
* src/node_device/node_device_linux_sysfs.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/storage/storage_backend_iscsi.c: Likewise.
* src/storage/storage_backend_mpath.c: Likewise.
* src/uml/uml_conf.c: Likewise.
* src/uml/uml_driver.c: Likewise.

Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives

The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions

 - virNetDevXXX       - operations for any type of interface
 - virNetDevBridgeXXX - operations for bridge interfaces
 - virNetDevTapXXX    - operations for tap interfaces

* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Update for API renaming

Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.

* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Remove error reporting code

The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.

This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.

The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation

* src/util/bridge.c, src/util/bridge.h: Remove brControl object
  and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
  src/qemu/qemu_driver.c: Remove reference to 'brControl' object

The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.

A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.

* src/conf/capabilities.h: Use a callback for default console
  type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
  for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
  src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
  src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
  src/xenapi/xenapi_driver.c: Set default console type callback

While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
  multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
  src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
  internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_process.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
  tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
  for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
  for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
  test file

Using a macro ensures that all the code is looking for the same
prefix.

* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.

Without this, a configure built by autoconf 2.59 was broken when
trying to detect which compiler warning flags were supported.

* .gnulib: Update to latest, for warnings.m4 fix.
* bootstrap.conf: Add fclose explicitly, to match recent gnulib
implicit dependency changes.
* src/qemu/qemu_conf.c (includes): Drop unused include.
* src/uml/uml_conf.c (include): Likewise.
Reported by Daniel P. Berrange.

In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.

I have been finding that some UML command line networking parameters are
being generated incorrectly.

For more information, see
https://bugzilla.redhat.com/show_bug.cgi?id=706295 .

These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

This matches the public API and helps to get rid of some special
case code in the remote generator.

Rename driver API functions and XDR protocol structs.

No functional change included outside of the remote generator.

We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose.  Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.

global rename performed with:

$ git grep -l virBufferVSprintf \
  | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'

then revert the changes in ChangeLog-old.

An upcoming patch has a use for a tap device to be created that
doesn't need to be actually put into the "up" state, and keeping it
"down" keeps the output of ifconfig from being unnecessarily cluttered
(ifconfig won't show down interfaces unless you add "-a").

bridge.[ch]: add "up" as an arg to brAddTap()
uml_conf.c, qemu_command.c: add "up" (set to "true") to brAddTap() call.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

* src/uml/uml_conf.c (umlBuildCommandLineChr)
(umlBuildCommandLine): Rewrite with virCommand.
* src/uml/uml_conf.h (umlBuildCommandLine): Update signature.
* src/uml/uml_driver.c (umlStartVMDaemon): Adjust caller.

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test

Extend user-mode-linux driver to support nwfilter.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

uml_dir overrides user-mode-linux's default of ~/.uml. This is needed
for a couple of different reasons:

libvirt expects this to default to virGetUserDirectory(geteuid()) +
'/.uml'. However, user-mode-linux actually uses the HOME environment
variable to determine where to look for the uml sockets, but if running
libvirtd under sudo (which I routinely do during development), $HOME is
pointing at my user's homedir, while my euid is 0, so libvirt looks in
/root.

Also (and this was my actual motivation for this patch), if HOME isn't
set at all, user-mode-linux utterly fails. Looking at the code, it seems
it's meant to emit a warning, but alas, it doesn't for some reason.
If running libvirtd from upstart, HOME is not set, so any system using
upstart will need this change.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

Like the comment suggested, we just open the file and pass the file
descriptor to uml. The input "stream" is set to "null", since I couldn't
find any useful way to actually use a file for input for a chardev and
this also mimics what e.g. QEmu does internally.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

This patch does two things:

 * It makes umlConnectTapDevice ask brAddTap for a persistent tap by
   passing it a NULL tapfd argument.
 * Stops umlConnectTapDevice from immediately dismantling the bridge
   it just set up.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

If umlBuildCommandLineChr fails (e.g. due to an unsupported chardev
type), it returns NULL. umlBuildCommandLine does not check for this and
sets this as an argument on the comand line, effectively ending the
argument list. This patch checks for this case and sets the chardev to
"none".
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

Added a more detailed error message when adding a tap devices fails and
the kernel is missing tun support.
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>

Fix the error checking to use the return value from brAddTap() instead
of checking the current errno value which might have been changed by
clean up calls inside of brAddTap().
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>

All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: NCole Robinson <crobinso@redhat.com>