- 09 12月, 2016 2 次提交
-
-
由 Mehdi Abaakouk 提交于
This is just a code move of virstat.c to virnetdevtap.c
-
由 Mehdi Abaakouk 提交于
In preparation to the code move to virnetdevtap.c, this change: * renames virNetInterfaceStats to virNetDevTapInterfaceStats * changes 'path' to 'ifname', to use the same vocable as other method in virnetdevtap.c. * Add the attributes checker
-
- 22 11月, 2016 1 次提交
-
-
由 Sławek Kapłoński 提交于
New line character in name of domain is now forbidden because it mess virsh output and can be confusing for users. Validation of name is done in drivers, after parsing XML to avoid problems with dissappeared domains which was already created with new-line char in name. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 26 9月, 2016 3 次提交
-
-
由 Michal Privoznik 提交于
Just like virDomainDefPostParseCallback has gained new parseOpaque argument, we need to follow the logic with virDomainDeviceDefPostParse. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
We want to pass the proper opaque pointer instead of NULL to virDomainDefParse and subsequently virDomainDefParseNode too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Some callers might want to pass yet another pointer to opaque data to post parse callbacks. The driver generic one is not enough because two threads executing post parse callback might want to see different data (e.g. domain object pointer that domain def belongs to). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 19 7月, 2016 1 次提交
-
-
由 Olga Krishtal 提交于
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>
-
- 11 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Allow to store driver specific data on a per-vcpu basis. Move of the virDomainDef*Vcpus* functions was necessary as virDomainXMLOptionPtr was declared below this block and I didn't want to split the function headers.
-
- 07 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
-
- 27 6月, 2016 2 次提交
-
-
由 Laine Stump 提交于
All the same information was already there, just in slightly different places in the virDomainNetDef.
-
由 Laine Stump 提交于
When support for <interface type='ethernet'> was added in commit 9a4b705f back in 2010, it erroneously looked at <source dev='blah'/> for a user-specified guest-side interface name. This was never documented though. (that attribute already existed at the time in the data.ethernet union member of virDomainNetDef, but apparently had no practical use - it was only used as a storage place for a NetDef's bridge name during qemuDomainXMLToNative(), but even then that was never used for anything). When support for similar guest-side device naming was added to the lxc driver several years later, it was put in a new subelement <guest dev='blah'/>. In the intervening years, since there was no validation that ethernet.dev was NULL in the other drivers that didn't actually use it, innocent souls who were adding other features assuming they needed to account for non-NULL ethernet.dev when really they didn't, so little bits of the usual pointless cargo-cult code showed up. This patch not only switches the openvz driver to use the documented <guest dev='blah'/> notation for naming the guest-side device (just in case anyone is still using the openvz driver), and logs an error if anyone tries to set <source dev='blah'/> for a type='ethernet' interface, it also removes the cargo-cult uses of ethernet.dev and <source dev='blah'/>, and eliminates if from the RNG and from virDomainNetDef. NB: I decided on this course of action after mentioning the inconsistency here: https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html and getting encouragement do eliminate it in a later IRC discussion with danpb.
-
- 17 6月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
-
- 10 6月, 2016 5 次提交
-
-
由 Daniel P. Berrange 提交于
Move all APIs with a virHostMEM name prefix out into new util/virhostmem.h & util/virhostmem.c files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Move all APIs with a virHostCPU name prefix out into new util/virhostcpu.h & util/virhostcpu.c files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
In preparation for moving all the CPU related APIs out of the nodeinfo file, give them a virHostCPU name prefix. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
In preparation for moving all the memory related APIs out of the nodeinfo file, give them a virHostMem name prefix. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Nearly all the methods in the nodeinfo file are given a 'const char *sysfs_prefix' parameter to override the default sysfs path (/sys/devices/system). Every single caller passes in NULL for this, except one use in the unit tests. Furthermore this parameter is totally Linux-specific, when the APIs are intended to be cross platform portable. This removes the sysfs_prefix parameter and instead gives a new method linuxNodeInfoSetSysFSSystemPath for use by the test suite. For two of the methods this hardcodes use of the constant SYSFS_SYSTEM_PATH, since the test suite does not need to override the path for thos methods. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 08 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virConnectOpenInternal method opens the libvirt client config file and uses it to resolve things like URI aliases. There may be driver specific things that are useful to store in the config file too, so rather than have them re-parse the same file, pass the virConfPtr down to the drivers. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 6月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Until now we weren't able to add checks that would reject configuration once accepted by the parser. This patch adds a new callback and infrastructure to add such checks. In this patch all the places where rejecting a now-invalid configuration wouldn't be a good idea are marked with a new parser flag.
-
由 Peter Krempa 提交于
Make it obvious that the flag is controlling RNG schema validation.
-
- 02 5月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
Trying to define a domain name containing an embedded '/' will immediately fail when trying to write the XML to disk for our stateful drivers. This patch explicitly rejects names containing a '/', and provides an xmlopt feature for drivers to avoid this validation check, which is enabled in every non-stateful driver that already has xmlopt handling wired up. (Technically this could reject a previously accepted vmname like '/foo', however at least for the qemu driver that falls over later when starting qemu) https://bugzilla.redhat.com/show_bug.cgi?id=639923
-
- 18 3月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
We include the file in plenty of places. This is mostly due to historical reasons. The only place that needs something from the header file is storage_backend_fs which opens _PATH_MOUNTED. But it gets the file included indirectly via mntent.h. At no other place in our code we need _PATH_.*. Drop the include and configure check then. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 09 3月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Introduce a helper to check supported device and domain config and move the memory hotplug checks to it. The advantage of this approach is that by default all new features are considered unsupported by all hypervisors unless specifically changed rather than the previous approach where every hypervisor would need to declare that a given feature is unsupported.
-
- 04 2月, 2016 1 次提交
-
-
由 Joao Martins 提交于
And use the newly added caps->host.netprefix (if it exists) for interface names that match the autogenerated target names. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 11 1月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
This way both Domain and Device PostParse functions can act based on the flags. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 09 12月, 2015 5 次提交
-
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and reusing it accross libvirt.
-
由 Peter Krempa 提交于
The new helper will simplify checking whether the domain config contains inactive vCPUs.
-
由 Peter Krempa 提交于
To support further refactors replace all write access to def->maxvcpus with a accessor function.
-
- 21 10月, 2015 1 次提交
-
-
由 Ishmanpreet Kaur Khera 提交于
We have macros for both positive and negative string matching. Therefore there is no need to use !STREQ or !STRNEQ. At the same time as we are dropping this, new syntax-check rule is introduced to make sure we won't introduce it again. Signed-off-by: NIshmanpreet Kaur Khera <khera.ishman@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 9月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=871452 So, you want to create a domain from XML. The domain already exists in libvirt's database of domains. It's okay, because name and UUID matches. However, on domain startup, internal representation of the domain is overwritten with your XML even though we claim that the XML you've provided is a transient one. The bug is to be found across nearly all the drivers. Le sigh. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 14 7月, 2015 3 次提交
-
-
由 John Ferlan 提交于
Add the sysfs_prefix argument to the call to allow for setting the path for tests to something other than SYSFS_SYSTEM_PATH.
-
由 John Ferlan 提交于
Add the sysfs_prefix argument to the call to allow for setting the path for tests to something other than SYSFS_SYSTEM_PATH.
-
由 John Ferlan 提交于
Add the sysfs_prefix argument to the call to allow for setting the path for tests to something other than SYSFS_SYSTEM_PATH.
-
- 27 4月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
The lookup is just for check whether a domain we are about to add does not already exists. Well, the virDomainObjListAdd() function does that for us already so there's no need to duplicate the check. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 4月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
Every domain that grabs a domain object to work over should reference it to make sure it won't disappear meanwhile. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 21 4月, 2015 2 次提交
-
-
由 Cole Robinson 提交于
This needs to specified in way too many places for a simple validation check. The ostype/arch/virttype validation checks later in DomainDefParseXML should catch most of the cases that this was covering.
-
由 Cole Robinson 提交于
-
- 02 4月, 2015 1 次提交
-
-
由 Ján Tomko 提交于
In the order of appearance: * MAX_LISTEN - never used added by 23ad665c (qemud) and addec57 (lock daemon) * NEXT_FREE_CLASS_ID - never used, added by 07d1b6b5 * virLockError - never used, added by eb8268a4 * OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN unused since the removal of ADD_ARG_LIT in d8b31306 * QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e7 * QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7b * TEST_MODEL_WORDSIZE - unused since c25c18f7 * TEMPDIR - never used, added by 714bef5b * NSIG - workaround around old headers added by commit 60ed1d2a unused since virExec was moved by commit 02e86910 * DO_TEST_PARSE - never used, added by 9afa0060 * DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb66
-