- 09 12月, 2016 2 次提交
-
-
由 Mehdi Abaakouk 提交于
This is just a code move of virstat.c to virnetdevtap.c
-
由 Mehdi Abaakouk 提交于
In preparation to the code move to virnetdevtap.c, this change: * renames virNetInterfaceStats to virNetDevTapInterfaceStats * changes 'path' to 'ifname', to use the same vocable as other method in virnetdevtap.c. * Add the attributes checker
-
- 22 11月, 2016 1 次提交
-
-
由 Sławek Kapłoński 提交于
New line character in name of domain is now forbidden because it mess virsh output and can be confusing for users. Validation of name is done in drivers, after parsing XML to avoid problems with dissappeared domains which was already created with new-line char in name. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 10月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Change the virDomainChrDef to use a pointer to 'source' and allocate that pointer during virDomainChrDefNew. This has tremendous "fallout" in the rest of the code which mainly has to change source.$field to source->$field. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 14 10月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
This function for some weird reason returns integer instead of virDomainNetType type. It is important to return the correct type so that we know what values we can expect. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 12 10月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
This way we get reference counting and we can get rid of locking function. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 28 9月, 2016 2 次提交
-
-
由 Jim Fehlig 提交于
Due to a copy and paste error, the scheduler 'cap' parameter was over-writing the 'weight' parameter when preparing the return parameters in libxlDomainGetSchedulerParametersFlags. As a result, the scheduler weight was never shown when getting schedinfo and setting the weight failed as well virsh schedinfo testvm Scheduler : credit cap : 0 virsh schedinfo testvm --cap 50 --weight 500 Scheduler : credit error: invalid scheduler option: weight The obvious fix is to assign the 'caps' parameter to the correct item in the parameter list. Reported-by: NVolo M. <vm@vovs.net>
-
由 Joao Martins 提交于
And allow libxl to handle channel element which creates a Xen console visible to the guest as a low-bandwitdh communication channel. If type is PTY we also fetch the tty after boot using libxl_channel_getinfo to fetch the tty path. On socket case, we autogenerate a path if not specified in the XML. Path autogenerated is slightly different from qemu driver: qemu stores also on "channels/target" but it creates then a directory per domain with each channel target name. libxl doesn't appear to have a clear definition of private files associated with each domain, so for simplicity we do it slightly different. On qemu each autogenerated channel goes like: channels/target/<domain-name>/<target name> Whereas for libxl: channels/target/<domain-name>-<target name> Should note that if path is not specified it won't persist, existing only on live XML, unless user had initially specified it. Since support for libxl channels only came on Xen >= 4.5 we therefore need to conditionally compile it with LIBXL_HAVE_DEVICE_CHANNEL. After this patch and having a qemu guest agent: $ cat domain.xml | grep -a1 channel | head -n 5 | tail -n 4 <channel type='unix'> <source mode='bind' path='/tmp/channel'/> <target type='xen' name='org.qemu.guest_agent.0'/> </channel> $ virsh create domain.xml $ echo '{"execute":"guest-network-get-interfaces"}' | socat stdio,ignoreeof unix-connect:/tmp/channel {"execute":"guest-network-get-interfaces"} {"return": [{"name": "lo", "ip-addresses": [{"ip-address-type": "ipv4", "ip-address": "127.0.0.1", "prefix": 8}, {"ip-address-type": "ipv6", "ip-address": "::1", "prefix": 128}], "hardware-address": "00:00:00:00:00:00"}, {"name": "eth0", "ip-addresses": [{"ip-address-type": "ipv4", "ip-address": "10.100.0.6", "prefix": 24}, {"ip-address-type": "ipv6", "ip-address": "fe80::216:3eff:fe40:88eb", "prefix": 64}], "hardware-address": "00:16:3e:40:88:eb"}, {"name": "sit0"}]} Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 26 9月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
We want to pass the proper opaque pointer instead of NULL to virDomainDefParse and subsequently virDomainDefParseNode too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 9月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
Both cpuCompare* APIs are renamed to virCPUCompare*. And they should now work for any guest CPU definition, i.e., even for host-passthrough (trivial) and host-model CPUs. The implementation in x86 driver is enhanced to provide a hint about -noTSX Broadwell and Haswell models when appropriate. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 12 9月, 2016 2 次提交
-
-
由 Joao Martins 提交于
Akin to previous commit but for "virsh cpu-baseline" which computes a baseline CPU for a set of host cpu elements. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Joao Martins 提交于
Implement support for "virsh cpu-compare" so that we can calculate common cpu element between a pool of hosts, which had a requirement of providing host cpu description. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 03 9月, 2016 1 次提交
-
-
由 Bob Liu 提交于
Add support for multi serial devices, after this patch virsh can be used to connect different serial devices of running domains. E.g. vish # console <xxx> --devname serial<xxx> Note: This depends on a xen/libxl bug fix to have libxl_console_get_tty(...) correctly returning the tty path (as opposed to always returning the first one). [0] https://lists.xen.org/archives/html/xen-devel/2016-08/msg00438.htmlSigned-off-by: NBob Liu <bob.liu@oracle.com>
-
- 30 8月, 2016 1 次提交
-
-
由 Jim Fehlig 提交于
The libxl driver has long supported migration V3 but has never indicated so in the connectSupportsFeature API. As a result, apps such as virt-manager that use the more generic virDomainMigrate API fail with libvirtError: this function is not supported by the connection driver: virDomainMigrate Add VIR_DRV_FEATURE_MIGRATION_V3 to the list of features marked as supported in the connectSupportsFeature API.
-
- 16 8月, 2016 2 次提交
-
-
由 Michal Privoznik 提交于
Because of change in caaa1bd3 this macro is no under #ifdef block. That means it needs to be re-intended correctly. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Roman Bogorodskiy 提交于
Commit eee7bd4e introduced two functions: libxlDiskPathToID and libxlDiskSectorSize. However, as they're used only by code under #ifdef __linux__, on non-Linux platforms it results in errors similar to this: CC libxl/libvirt_driver_libxl_impl_la-libxl_driver.lo libxl/libxl_driver.c:5263:1: error: unused function 'libxlDiskPathToID' [-Werror,-Wunused-function] libxlDiskPathToID(const char *virtpath) ^ libxl/libxl_driver.c:5312:1: error: unused function 'libxlDiskSectorSize' [-Werror,-Wunused-function] libxlDiskSectorSize(int domid, int devno) ^ 2 errors generated. Fix that by moving these functions under the #ifdef __linux__ block.
-
- 02 8月, 2016 5 次提交
-
-
由 John Ferlan 提交于
Commit id '44304c6e' added the API libxlDomainAttachControllerDevice inside a conditional LIBXL_HAVE_PVUSB, but called that function outside the conditional in libxlDomainAttachDeviceLive. Similarly, the API libxlDomainDetachControllerDevice was added inside a conditional LIBXL_HAVE_PVUSB, but called outside the conditional in libxlDomainDetachDeviceLive. This patch adds the conditional LIBXL_HAVE_PVUSB around those two calls from within the switch.
-
由 Cédric Bosdonnat 提交于
Introduce libxl hook and use it for start, prepare, started, stop, stopped, migrate events.
-
由 Cédric Bosdonnat 提交于
In case of error, libxlReconnectDomain may call virDomainObjListRemoveLocked. However it has no local reference on the domain object, leading to segfault. Get a reference to the domain object at the start of the function and release it at the end to avoid problems. This commit also factorizes code between the error and normal ends.
-
由 Chunyan Liu 提交于
When hotplugging a USB device, check if there is an available controller and port, if not, automatically create a USB controller of version 2.0 and 8 ports. Signed-off-by: NChunyan Liu <cyliu@suse.com>
-
由 Chunyan Liu 提交于
Support USB controller hot-plug and hot-unplug. #virsh attach-device dom usbctrl.xml #virsh detach-device dom usbctrl.xml usbctrl.xml example: <controller type='usb' index='0' model='qusb2'> Signed-off-by: NChunyan Liu <cyliu@suse.com>
-
- 27 7月, 2016 1 次提交
-
-
由 Joao Martins 提交于
Introduce initial support for domainBlockStats API call that allow us to query block device statistics. OpenStack nova uses this API call to query block statistics, alongside virDomainMemoryStats and virDomainInterfaceStats. Note that this patch only introduces it for VBD for starters. QDisk would come in a separate patch series. A new statistics data structure is introduced to fit common statistics among others specific to the underlying block backends. For the VBD statistics on linux these are exported via sysfs on the path: "/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics" To calculate the block devno libxlDiskPathToID is introduced. Each backend implements its own function to extract statistics, allowing support for multiple backends and different platforms. VBD stats are exposed in reqs and number of sectors from blkback, and it's up to us to convert it to sector sizes. The sector size is gathered through xenstore in the device backend entry "physical-sector-size". BlockStatsFlags variant is also implemented which has the added benefit of getting the number of flush requests. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 11 7月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Allow to store driver specific data on a per-vcpu basis. Move of the virDomainDef*Vcpus* functions was necessary as virDomainXMLOptionPtr was declared below this block and I didn't want to split the function headers.
-
由 Peter Krempa 提交于
-
- 07 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Libxl is the last user and I don't have the toolchain prepared to compile the libxl driver. Move it to the libxl driver to avoid having to refactor the code.
-
- 23 6月, 2016 1 次提交
-
-
由 Jim Fehlig 提交于
When domXML contains only <console type='pty'> and no corresponding <serial>, the console is "stolen" [1] and used as the first <serial> device. When this "stolen" console is accessed from the libxl driver (in libxlConsoleCallback and libxlDomainOpenConsole), check if the targetType is VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL, and use the "stolen" device in def->serials[0] instead. Prior to this change, creating a domain with input XML containing only a <console> device and subsequently attempting to access its console with 'virsh console' would fail error: internal error: character device <null> is not using a PTY [1] See comments associated with virDomainDefAddConsoleCompat() in $LIBVIRT-SRC/src/conf/domain_conf.c:
-
- 17 6月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
-
- 15 6月, 2016 2 次提交
-
-
由 Chunyan Liu 提交于
Support hot attach/detach a USB host device to guest. Currently libxl only supports xen PV guest, and only supports specifying USB host device by 'bus number' and 'device number', for example: usb.xml: <hostdev mode='subsystem' type='usb' managed='no'> <source> <address bus='1' device='3'/> </source> </hostdev> #xl attach-device dom usb.xml #xl detach-device dom usb.xml Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Chunyan Liu 提交于
Support creating guest with USB host device in config file. Currently libxl only supports xen PV guest, and only supports specifying USB host device by 'bus number' and 'device number', for example: <hostdev mode='subsystem' type='usb' managed='no'> <source> <address bus='1' device='3'/> </source> </hostdev> Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 14 6月, 2016 3 次提交
-
-
由 Martin Kletzander 提交于
Version was bumped but documentation (and comments) didn't follow the numbering. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Jim Fehlig 提交于
Add domain capabilities for PV and HVM domains. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
Move capabilities code out of libxl_conf.{ch} and into new libxl_capabilities.{ch} files. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 13 6月, 2016 1 次提交
-
-
由 Wang Yufei 提交于
In libxl driver we do virObjectRef in libxlDomainObjBeginJob, If virCondWaitUntil failed, it goes to error, do virObjectUnref, There's a chance that someone undefine the vm at the same time, and refs unref to zero, vm is freed in libxlDomainObjBeginJob. But the vm outside function is not Null, we do virObjectUnlock(vm). That's how we overwrite the vm memory after it's freed. I fix it. Signed-off-by: NWang Yufei <james.wangyufei@huawei.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 08 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virConnectOpenInternal method opens the libvirt client config file and uses it to resolve things like URI aliases. There may be driver specific things that are useful to store in the config file too, so rather than have them re-parse the same file, pass the virConfPtr down to the drivers. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 6月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Similarly to the domain definition validator add a device validator. The change to the prototype of the domain validator is necessary as virDomainDeviceInfoIterateInternal requires a non-const pointer.
-
由 Peter Krempa 提交于
Make it obvious that the flag is controlling RNG schema validation.
-
- 25 5月, 2016 1 次提交
-
-
由 Chunyan Liu 提交于
Add .domainInterfaceAddresses so that user can have a way to get domain interface address by 'virsh domifaddr'. Currently it only supports '--source lease'. Signed-off: Chunyan Liu <cyliu@suse.com>
-
- 24 5月, 2016 1 次提交
-
-
由 Jovanka Gulicoska 提交于
Replace VIR_ERROR with virReportError
-
- 20 5月, 2016 1 次提交
-
-
由 Jovanka Gulicoska 提交于
Convert to virGetLastErrorMessage() in the rest of the code
-
- 18 5月, 2016 1 次提交
-
-
由 Chunyan Liu 提交于
Unify XEN_CONFIG_FORMAT_x and LIBXL_CONFIG_FORMAT_x to XEN_CONFIG_FORMAT_x, and move to xen_common.h. Signed-off-by: NChunyan Liu <cyliu@suse.com>
-