- 28 8月, 2017 4 次提交
-
-
由 Pavel Hrdina 提交于
While formatting disk or chardev element they both uses virDomainDiskSourceDefFormatSeclabel() function which also closes the source element. This is not extendable. Use the new virXMLFormatElement() to properly format the source element with possible child elements. As a side effect it fixes a bug in disk source formatting. Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
This helper allows you to better structurize the code if some element may or may not contains attributes and/or child elements. Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Erik Skultety 提交于
This pulls in, among other new things, vc-list-files fix to make syntax-check work with git worktrees. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 27 8月, 2017 4 次提交
-
-
由 Cole Robinson 提交于
To handle setting a default heads value. Convert callers that were doing it by hand Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
And into DeviceDefValidate which is the expected place Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
The ram/vram = 0 bits aren't needed, and PostParse will fill in the needed QXL default Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Both of these are dead code: qemu_command.c explicitly rejects VIRT_XEN earlier in the call chain, and qemu_parse_command.c will never set VIRT_XEN anymore Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 26 8月, 2017 4 次提交
-
-
由 Scott Garfinkle 提交于
-
由 Scott Garfinkle 提交于
Implement a migrate-getmaxdowntime command to complement migrate-setmaxdowntime.
-
由 Scott Garfinkle 提交于
Add code to support querying maximum allowable downtime during live migration.
-
由 Scott Garfinkle 提交于
Add virDomainMigrateGetMaxDowntime to support querying maximum allowable downtime during live migration.
-
- 25 8月, 2017 3 次提交
-
-
由 Andrea Bolognani 提交于
This is more user-friendly because the error will be displayed directly instead of being buried in the log. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Nitesh Konkar 提交于
Fix the warning generated on PPC by virt-host-validate for IOMMU. In case of PPC, IOMMU in the host kernel either has it or it's not compiled in. The /sys/kernel/iommu_groups check is good enough to verify if it was compiled with the kernel or not. Modify the error message when "if (sb.st_nlink <= 2)" to indicate what the problem would be since there would be no @bootarg. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Erik Skultety 提交于
Revert @f8172388 which broke the build on Centos 6, because of old autoconf (< 2.63b) not properly quoting arguments for shell.
-
- 24 8月, 2017 7 次提交
-
-
由 George Dunlap 提交于
Using a variable named 'stat' clashes with the system function 'stat()' causing compiler warnings on some platforms: libxl/libxl_driver.c: In function 'libxlDomainBlockStatsVBD': libxl/libxl_driver.c:5387: error: declaration of 'stat' shadows a global declaration [-Wshadow] /usr/include/sys/stat.h:455: error: shadowed declaration is here [-Wshadow] Signed-off-by: NGeorge Dunlap <george.dunlap@citrix.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Erik Skultety 提交于
This pulls in, among other new things, vc-list-files fix to make syntax-check work with git worktrees. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Ján Tomko 提交于
When parsing the config, we look for the SCSI controllers one by one, remembering their models, then let virDomainDefAddImplicitDevices add them if any SCSI disk is using them. Since these controllers are not really implicit (they are present in the source config), add them explicitly. This patch maintains the behavior of not adding a controller if it was present in the config, but no disk was using it. This also resolves the memory leak of virVMXParseConfig overwriting the video device added by calling virDomainDefAddImplicitDevices before the parsing is finished. Reported-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Nikolay Shirokovskiy 提交于
6e6faf6d changed vzDomObjAlloc signature in source but not in header file. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
-
由 Ján Tomko 提交于
For selected hostdev types, we validate that the address type matches the subsystem type when parsing the XML. Move it to the validation phase, to allow extending the checks to other subsystem types without making existing domains disappear.
-
由 John Ferlan 提交于
If we jump to the error: label and @secbuf is allocated, then it's not free'd at all. Found by Coverity
-
- 23 8月, 2017 2 次提交
-
-
由 Nikolay Shirokovskiy 提交于
At the time the check was written virtuozzo did not use disabled items in boot order configuration. Boot items were always enabled. Now they can be disabled as well. Supporting such items is easy - they just should be ignored.
-
由 Andrea Bolognani 提交于
HTML5 obsoletes the 'name' attribute in favor of 'id', and our TOC generator apparently follows the recommendation to the letter, resulting in a broken TOC if you use the old-school attribute. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
- 22 8月, 2017 16 次提交
-
-
由 Ján Tomko 提交于
When parsing bootable devices, we maintain a bitmap of used <boot order=""> elements. Use it in the post-parse function to figure out whether the user tried to mix per-device and per-domain boot elements. This removes the need to count them twice.
-
由 Ján Tomko 提交于
Rename the original function to virDomainDefPostParseInternal to allow adding arguments that will be only used by the internal version.
-
由 Ján Tomko 提交于
These functions contain the post-parse steps common for all drivers. Rename it to use the 'Common' prefix, instead of the vagueness of 'Internal', leaving 'Internal' available for other vague uses.
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
There is no reason why to share the same code for PTY and other file based chardev source types. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Since the source element is parsed only once for these type of character devices we don't have to use temporary variable and check whether the variable was already set. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
The extra check whether (connect|bind)(Host|Service) was set is required because for UDP chardev there can be two source elements. Without the check there could be a memory leak. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
In order to ensure that the default protocol is RAW, explicitly assigning VIR_DOMAIN_CHR_TCP_PROTOCOL_RAW = 0. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Remove check whether a variable was already set because the element is parsed only once now. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Remove check whether a variable was already set because the element is parsed only once now. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Currently we accept and correctly parse this chardev XML: ... <channel type='tcp'> <source mode='connect'/> <source mode='bind' host='localhost'/> <source service='4567'/> <target type='virtio' name='test'/> </channel> ... The parsed formatted XML is: ... <channel type='tcp'> <source mode='connect' host='localhost' service='4567'/> <target type='virtio' name='test'/> </channel> ... That behavior is super wrong and should not be allowed. If you notice the current parse takes the first found attribute and uses that value, so for example from the "<source mode='bind' host='localhost'/>" only the "host" attribute is used. It works the same way for all possible attributes that we are able to parse for source element. This patch enforces providing only one source element for all character devices, only for UDP type we allow to provide two source elements since you can specify both modes. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-