we already have virtualize meminfo for container through fuse filesystem,
add function lxcContainerMountProcFuse to mount this meminfo file to
the container's /proc/meminfo.

So we can isolate container's /proc/meminfo from host now.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

with this patch,container's meminfo will be shown based on
containers' mem cgroup.

Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.

if I miss something, please let me know.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

because libvirt_lxc's cgroup mountpoint is what it shown
in /proc/self/cgroup.

we can get container's cgroup through virCgroupNew("/", &group),
add interface virCgroupGetAppRoot to help container to
get it's cgroup.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

virCgroupGetMemSwapUsage is used to get container's swap usage,
with this interface,we can get swap usage in fuse filesystem.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Add a configure option --with-fuse to prepare introduction
of fuse support for libvirt lxc.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

This bug leads to getting incorrect vcpupin information via
qemudDomainGetVcpuPinInfo() API when the number of maximum
cpu on a host falls into a range such as 31 < ncpus < 64.

gcc warning:
left shift count >= width of type

The following bug is such the case
https://bugzilla.redhat.com/show_bug.cgi?id=876415

In qemuDomainSaveMemory, wrapperFd might be NULL and should be checked before
calling virFileWrapperFdCatchError. Same in doCoreDump.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=880919

Sort the symbols listed in libvirt_daemon.syms
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This splits out some common code from virDBusGetSystemBus and
uses it to implement a new virDBusGetSessionBus helper.

Change some legacy function names to use 'qemu' as their
prefix instead of 'qemud' which was a hang over from when
the QEMU driver ran inside a separate daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When starting an LXC guest with a virNetwork based NIC device,
if the network was not active, the virNetworkPtr device would
be leaked
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In virNetDevVethDelete the virRun method will properly report
errors, but when checking the exit status for non-zero exit
code no error is reported
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When starting a container, newDef is initialized to a
copy of 'def', but when startup fails newDef is never
removed. This cause later attempts to use 'virDomainDefine'
to lose the new data being defined.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A mistaken initialization of 'ret' caused failure to create
macvtap devices to be ignored. The libvirt_lxc process
would later fail to start due to missing devices

Also make sure code checks '< 0' and not '!= 0' since only
-1 is considered an error condition
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If the <interface> device did not contain any <target>
element, LXC would crash on a NULL pointer if starting
the container failed
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When failing to create a macvlan interface, make sure the
error message contains the name of the host interface
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The LXC driver relies on use of cgroups to kill off LXC processes
in shutdown. If cgroups aren't available, we're unable to kill
off processes, so we must treat lack of cgroups as a fatal startup
error.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The code setting up LXC cgroups used an 'rc' variable both
for capturing the return value of methods it calls, and
its own return status. The result was that several failures
in setting up cgroups would actually result in success being
returned.

Use a separate 'ret' for tracking return value as per normal
code design in other parts of libvirt
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The initpid will be required long term to enable LXC to
implement various hotplug operations. Thus it needs to be
persisted in the domain status XML. LXC has not used the
domain status XML before, so this introduces use of the
helpers.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the lxcContainerSetupMounts method uses the
virSecurityManagerPtr instance to obtain the mount options
string and then only passes the string down into methods
it calls. As functionality in LXC grows though, those
methods need to have direct access to the virSecurityManagerPtr
instance. So push the code down a level.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The impls of virSecurityManagerGetMountOptions had no way to
return errors, since the code was treating 'NULL' as a success
value. This is somewhat pointless, since the calling code did
not want NULL in the first place and has to translate it into
the empty string "". So change the code so that the impls can
return "" directly, allowing use of NULL for error reporting
once again
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=876828

Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).

The actual regression is due to a latent bug.  The hot unplug code
was computing the set of files needing cgroup ACL revocation based
on the XML passed in by the user, rather than based on the domain's
details on which disk was being deleted.  As long as the revoke
path was always recomputing the backing chain, this didn't really
matter; but now that we want to compute the chain exactly once and
remember that computation, we need to hang on to the backing chain
until after the revoke has happened.

* src/qemu/qemu_hotplug.c (qemuDomainDetachPciDiskDevice):
Transfer backing chain before deletion.

Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>

Qemu accepts gluster protocol as supported storage backend beside others.
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>

This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.

Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.

This patch allows users to specify disks on gluster backends like this:

    <disk type='network' device='disk'>
      <driver name='qemu' type='raw'/>
      <source protocol='gluster' name='Volume1/image'>
        <host name='example.org' port='6000' transport='tcp'/>
      </source>
      <target dev='vda' bus='virtio'/>
    </disk>

    <disk type='network' device='disk'>
      <driver name='qemu' type='raw'/>
      <source protocol='gluster' name='Volume2/image'>
        <host transport='unix' socket='/path/to/sock'/>
      </source>
      <target dev='vdb' bus='virtio'/>
    </disk>
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>

Although we require various C99 features, we don't yet require a
complete C99 compiler.  On RHEL 5, compilation complained:

qemu/qemu_command.c: In function 'qemuBuildGraphicsCommandLine':
qemu/qemu_command.c:4688: error: 'for' loop initial declaration used outside C99 mode

* src/qemu/qemu_command.c (qemuBuildGraphicsCommandLine): Declare
variable sooner.
* src/qemu/qemu_process.c (qemuProcessInitPasswords): Likewise.

The patch refactors the current ESX storage driver due to following reasons:

1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.

This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.

File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
                     |
                     |---> esx_storage_backend_vmfs.c (VMFS backend)

When no security driver is specified libvirt_lxc segfaults as a debug
message tries to access security labels for the container that are not
present.

This problem was introduced in commit 6c3cf57d.

Early jumps to the cleanup label caused a crash of the libvirt_lxc
container helper as the cleanup section called
virLXCControllerDeleteInterfaces(ctrl) without checking the ctrl argument
for NULL. The argument was de-referenced soon after.

$ /usr/libexec/libvirt_lxc
/usr/libexec/libvirt_lxc: missing --name argument for configuration
Segmentation fault

This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.

One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:

1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.

virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.

The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.

The new model supports following features in addition to those supported
by SandyBridge:

fma, pcid, movbe, fsgsbase, bmi1, hle, avx2, smep, bmi2, erms, invpcid,
rtm

Commit 258e06c8 removed setting of the volume type to
VIR_STORAGE_VOL_BLOCK, which leads to failures in
storageVolumeCreateXMLFrom.

The type (and target.format) of the volume was set to zero. In
virStorageBackendGetBuildVolFromFunction, this gets interpreted as
VIR_STORAGE_FILE_NONE and the qemu-img tool is called with unknown
"none" format.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=879780

bridge_driver.h: silence gcc warnings:
statement with no effect [-Wunused-value]
unused variable 'net' [-Wunused-variable]

virdrivermoduletest.c: don't require network driver module
if it hasn't been built.

When the value of memspec was empty taking of a snapshot failed without
reporting an error.

The virLXCControllerClientCloseHook method was mistakenly
assuming that the private data associated with the network
client was the virLXCControllerPtr. In fact it was just a
dummy int, so we were derefencing a bogus struct. The
frequent result of this was that we would never quit, because
we tried to arm a non-existant timer.

Fix the code by removing the dummy private data and just
using the virLXCControllerPtr instance as private data
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>