I've received a notice over IRC that on some systems, the
virnetdevbandwidthtest is not linked with libxml:

  /usr/bin/ld: virnetdevbandwidthtest.o: undefined reference to symbol 'xmlStrEqual@@LIBXML2_2.4.30'
  /usr/lib/x86_64-linux-gnu/libxml2.so.2: error adding symbols: DSO missing from command line

Trivial way avoiding this is to add LIBXML_LIBS to
virnetdevbandwidthtest_LDADD.

We support only one spicevmc channel name anyway and the code is
prepared to use the default one, there's only one check missing.  It
is also mentioned in the documentation already and helps defining
domains with spice vdagent for people using virsh.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.

While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.

And while doing this, fix one error raised by coverity. With
current code, @actual_cmd is allowed to be NULL for the whole
run of testVirNetDevBandwidthSet. However, if something else
was expected, the @actal_cmd is passed to virtTestDifference
which dereference it immediately.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On openSuse, (and possibly other distros), tc isn't located in
/sbin/tc. To get rid of that problem, use TC constant instead of hard
coded /sbin/tc in the expected string

The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.

In the virNWFilter{Define,Undefine} codepaths the lock ordering
is

  1. nwfilter driver lock
  2. virt driver lock
  3. nwfilter update lock
  4. domain object lock

In the VM guest startup paths the lock ordering is

  1. virt driver lock
  2. domain object lock
  3. nwfilter update lock

As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.

The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of

  1. nwfilter driver lock
  2. nwfilter update lock
  3. virt driver lock
  4. domain object lock

and VM start using

  1. nwfilter update lock
  2. virt driver lock
  3. domain object lock

This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.

These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are a number of pthreads impls available on Win32
these days, in particular the mingw64 project has a good
impl. Delete the native windows thread implementation and
rely on using pthreads everywhere.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On Fedora 19 and older the pthreads impl provided with
mingw does not have any pthread_sigmask impl at all. The
configure.ac check was not distinguishing this scenario
from that of a broken pthread_sigmask impl, so was
mistakenly enabling the libvirt workaround even when it
was not needed. This in turn conflicted with the gnulib
provided pthread_sigmask impl.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add virRWLock backed up by a POSIX rwlock primitive
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The check-augeas-lockd test depends on the file
locking/qemu-lockd.conf, so must be skipped when QEMU
is disabled.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add tests/virscsidata/sg0 and tests/virscsidata/sg8 as the test
input for constructing scsi->sg_path. And change the scsi generic
number of "1:0:0:0", because it's easy to hide the problem (assuming
most machines have a CDROM drive).
Signed-off-by: NOsier Yang <jyang@redhat.com>

Commit 10c9ceff intended to introduce new argument for the
testing purpose, but it missed the similar changing of the
device's sg_path. The problem was hidden since my laptop has
the /dev/sg0 and /dev/sg1.  A later patch will modify the tests
accordingly.
Signed-off-by: NOsier Yang <jyang@redhat.com>
Reported-by: NPavel Hrdina <phrdina@redhat.com>

It breaks the build on RHEL-5.10 and because it's only optional we
could remove it from the code. The default namespace will be used.
This hunk was introduced by commit 237a088b.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This fixes the wrong argument order.

This creates the basic unit tests for the scsi utils.
Signed-off-by: NOsier Yang <jyang@redhat.com>

To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.

Later tests for the scsi utils will be based on this patch.
Signed-off-by: NOsier Yang <jyang@redhat.com>

It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).

To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable).  And the change on the data struct brings on many
subsequent changes in the code.

Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable".  So this patch also added notes
in formatdomain.html to declare the fact.

* src/util/virscsi.h:
  - Remove virSCSIDeviceGetUsedBy
  - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
  - Add virSCSIDeviceIsAvailable

* src/util/virscsi.c:
  - struct virSCSIDevice: Change "used_by" to be an array; Add
    "n_used_by" as the array count
  - virSCSIDeviceGetUsedBy: Removed
  - virSCSIDeviceFree: frees the "used_by" array
  - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
    memory corruption
  - virSCSIDeviceIsAvailable: New
  - virSCSIDeviceListDel: Change the logic, for device which is already
    in the list, just remove the corresponding entry in "used_by". And
    since it's only used in one place, we can safely removing the code
    to find out the dev in the list first.
  - Copyright updating

* src/libvirt_private.sys:
  - virSCSIDeviceGetUsedBy: Remove
  - virSCSIDeviceIsAvailable: New

* src/qemu/qemu_hostdev.c:
  - qemuUpdateActiveScsiHostdevs: Check if the device existing before
    adding it to the list;
  - qemuPrepareHostdevSCSIDevices: Error out if the not all domains
    use the device as "shareable"; Also don't try to add the device
    to the activeScsiHostdevs list if it already there; And make
    more sensible error w.r.t the current "shareable" value in
    driver->activeScsiHostdevs.
  - qemuDomainReAttachHostScsiDevices: Change the logic according
    to the changes on helpers.
Signed-off-by: NOsier Yang <jyang@redhat.com>

Check for presence of sys/cpuset.h header and cpuset_getaffinity()
in configure instead of just using #ifdef __FreeBSD__ for that code.

This reverts commit 2996e6be
and some parts of 2636dc8c.

The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.

The latter one is the test for the previous one. Now none of them makes
sense.

1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html

Conflicts:
	tests/virnetdevbandwidthtest.c: New test has been introduced since
    then.

The test tries to set some QoS limits and check if the commands
that are actually executed are the expected ones.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are some units within libvirt that utilize virCommand API to run
some commands and deserve own unit testing. These units are, however,
not desired to be rewritten to dig virCommand API usage out. As a great
example virNetDevBandwidth could be used. The problem with the bandwidth
unit is: it uses virCommand API heavily. Therefore we need a mechanism
to not really run a command, but rather see its string representation
after which we can decide if the unit construct the correct sequence of
commands or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).

Also amend the test suite to check parsing of the various new disk
types that can now be specified.

Commit df36af58 broke parsing of http response from xend.  The prior
use of atoi() would happily parse e.g. a string containing "200 OK\r\n",
whereas virStrToLong_i() will fail when called with a NULL end_ptr.
Change the calls to virStrToLong_i() to provide a non-NULL end_ptr.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

The new tests would fail in various ways without the two previous
commits.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

When all source CPU XMLs contain just a single CPU model (with a
possibly varying set of additional feature elements),
virConnectBaselineCPU will try to use this CPU model in the computed
guest CPU. Thus, when used on just a single CPU (useful with
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES), the result will not use a
different CPU model.

If the computed CPU uses the source model, set fallback mode to 'forbid'
to make sure the guest CPU will always be as close as possible to the
source CPUs.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES flag for virConnectBaselineCPU
did not work if the resulting guest CPU would disable some features
present in its base model. This patch makes sure we won't try to add
such features twice.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

virConnectBaselineCPU test results are now stored in different files
depending on VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES.

Split out the repetitive code.

Implement virProcess{Get,Set}Affinity() using cpuset_getaffinity()
and cpuset_setaffinity() calls. Quick search showed that they are
only available on FreeBSD, so placed it inside existing #ifdef
blocks for FreeBSD instead of adding configure checks.

Creating a qemu VM with /dev/hwrng as backend RNG device throws the
following error - "Could not open '/dev/hwrng': Permission denied"
This patch fixes the issue
Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The only API tested so far would be virNetDevBandwidthMinimal.
But there's more to come!
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1055484

Currently, libvirt's XML schema of network allows QoS to be defined for
every network even though it has no bridge. For instance:

<network>
    <name>vdsm-no-bridge</name>
    <forward mode='passthrough'>
      <interface dev='em1.10'/>
    </forward>
    <bandwidth>
        <inbound average='1000' peak='5000' burst='1024'/>
        <outbound average='1000' burst='1024'/>
    </bandwidth>
</network>

The bandwidth limitations can be, however, applied even on such
networks. In fact, they are going to be applied on the interface that
will be connected to the network on a domain startup. This approach,
however, has one limitation. With bridged networks, there are two points
where QoS can be set: bridge and domain interface. The lower limit of
the two is enforced then. For instance, if the interface has 10Mbps
average, but the network only 1Mbps, there's no way for interface to
transmit packets faster than the 1Mbps limit. With two points this is
enforced by kernel.  With only one point, we must combine both QoS
settings into one which is set afterwards. Look at
virNetDevBandwidthMinimal() and you'll understand immediately what I
mean.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Check if cpu stats are read correctly from a sample
/proc/stat collected from a 24 CPU machine.

linuxNodeInfoCPUPopulate is only used in the nodeinfo.c file
and in the test suite.

Quite often, I need to cite URLs like
    http://libvirt.org/formatnetwork.html#elementQoS
but it is annoying to copy them from the table of contents or the html
source.

This patch borrows from the Python documentation in order to make it
easier to cite headers on libvirt's oneline documentation.

This patch allows libvirt user to specify 'host-passthrough'
cpu mode while using qemu/kvm backend on aarch64.
It uses 'host' as a CPU model name instead of some other stub
(correct CPU detection is not implemented yet) to allow libvirt
user to specify 'host-model' cpu mode as well.
Signed-off-by: NOleg Strikov <oleg.strikov@canonical.com>

(crobinso: fix some indentation)

Windows doesn't allow : in filenames.

Commit 21685c95 added files with a : in
their names. This broke git operations on Windows as git is not able to
create those files on clone or pull.

Replace : with - in the offending filenames and adapt the test case.

Currently the qemuDomainGetBlockInfo will return allocation == physical
for most backing stores. For a qcow2 block backed device it's possible
to return the highest lv extent allocated from qemu for an active guest.
That is a value where allocation != physical and one would hope be less.
However, if the guest is not running, then the code falls back to returning
allocation == physical. This turns out to be problematic for rhev which
monitors the size of the backing store. During a migration, before the
VM has been started on the target and while it is deemed inactive on the
source, there's a small window of time where the allocation is returned
as physical triggering the code to extend the file unnecessarily.

Since rhev uses transient domains and this is edge condition for a transient
domain, rather than returning good status and allocation == physical when
this "window of opportunity" exists, this patch will check for a transient
(or non persistent) domain and return a failure to the caller rather than
returning the defaults. For a persistent domain, the defaults will be
returned. The description for the virDomainGetBlockInfo has been updated
to describe the phenomena.

config-post.h included indirectly from packet-libvirt.c stays in
$(top_srcdir) rather than $(top_builddir) which is added automatically.