Otherwise an attempt to use virConnectOpen or virConnectOpenAuth without
auth pointer results in the driver declining the URI and libvirt falling
back to the remote driver for an esx:// URI.

The cur_vcpus member of struct libxl_domain_build_info was incorrectly
initialized to the number of vcpus, when it should have been interpreted
as a bitmap, where bit X corresponds to online/offline status of vcpuX.

To complicate matters, cur_vcpus is an int, so only 32 vcpus can be
set online.  Add a check to ensure vcpus does not exceed this limit.

V2: Eric Blake noted a compilation pitfal when '1 << 32' on an int.
    Account for vcpus == 32.

We don't use the gnulib vsnprintf replacement, which means that
on mingw, vsnprintf doesn't support %zn or %lln.

And as it turns out, VIR_GET_VAR_STR was a rather inefficient
reimplementation of virVasprintf logic.

* src/util/logging.c (VIR_GET_VAR_STR): Drop.
(virLogMessage): Inline a simpler version here.
* src/util/virterror.c (VIR_GET_VAR_STR, virRaiseErrorFull):
Likewise.
Reported by Matthias Bolte.

Saving domain to previously created file changes also its ownership.
This is certainly not what users want if some conditions are met:
it is a regular, local file and dynamic_ownership is off.

Change f88af9dc accidentally
reverted the .gnulib update from f3cfc99e

* .gnulib: Update to 2c25c9ebe8db1415bfde25f0a451767332c8cf59

NB: the enum that uses the string vnet-host (now changed to vhost-net)
is used in XML, but fortunately that hasn't been in an official
release yet, so it can still be fixed.

Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port

* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
  to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
  in <graphics> listen attributes

The qemuMigrationConfirm method shouldn't deal with final VM
cleanup, since it can be called from the peer2peer migration,
which expects to still use the 'vm' object afterwards.

Push the cleanup code out of qemuMigrationConfirm, into its
caller, qemuDomainMigrateConfirm3

* src/qemu/qemu_driver.c: Add VM cleanup code to
  qemuDomainMigrateConfirm3
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Remove
  job handling cleanup from qemuMigrationConfirm

To allow new mandatory migration cookie data to be introduced,
add support for checking supported feature flags when parsing
migration cookie.

* src/qemu/qemu_migration.c: Feature flag checking in migration
  cookie parsing

Two additional places need initgroups call to properly work in an
environment where the UID is allowed to open/create stuff through its
supplementary groups.

py_str() function call PyString_AsString(). As written in documentation,
the caller must not free the returned value, because it points to some
internal structures.

Commit d7b26792 introduced
a return value picking of qemu-img on '-h', but without any comment.

This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).

Usage:

    <graphics type='spice' autoport='yes'>
      <streaming mode='off'/>
    </graphics>

Tested with the above and with tests/qemuxml2argvtest.
Signed-off-by: NAlon Levy <alevy@redhat.com>

This patch enables filtering of gratuitous ARP packets using the following XML:

<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>

This was discussed in:

  https://www.redhat.com/archives/libvir-list/2011-May/msg01370.html

The capabilities code only sets the flag to allow use of vhost-net if
kvm is detected (set if the help string contains "(qemu-kvm-" or
"(kvm-"), but actually vhost-net is available in some qemu builds that
don't have kvm in their name, so just checking for ",vhost=" is enough.

When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>

This typo caused a bug in which we wanted to free() invalid pointer.

qemu-img returns non-zero status on -h. Therefore we need to
provide virCommandRun() a non-NULL exit status pointer.

Steps to reproduce this problem:
1. # ./autogen.sh --without-libvirtd
2. # make dist
   ...
   make[1]: Entering directory `/home/wency/source/libvirt-nodaemon/daemon'
   make[1]: *** No rule to make target `remote_dispatch_prototypes.h', needed by `distdir'.  Stop.
   make[1]: Leaving directory `/home/wency/source/libvirt-nodaemon/daemon'
   make: *** [distdir] Error 1

Lacks of "/", push this directly in trivial rule.

This allows qemu to create files in /var/cache/libvirt/qemu/, and
specifically is required to fix virDomainMemoryPeek.

Otherwise qemu is unable to write to it, with the error:

libvir: QEMU error : internal error unable to execute QEMU command 'memsave': Could not open '/var/cache/libvirt/qemu/qemu.mem.RRNvLv'

Replace $calls{$_} with $call in the dispatch bodies generator function.

No functional change included.

Now that RHEL 5.6 ships with gettext 0.17, we can get out of the
stone age and use the newer gettext capabilities and improved
macros for certain configure tests.

* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
(MKINSTALLDIRS): Delete hack that is no longer needed.
* bootstrap.conf (buildreq): Check for minimum gettext version.
Based on a report by Wen Congyang.

Use variables VIRSH_DEBUG and VIRSH_LOG_FILE for controlling virsh logging.
Signed-off-by: NSupriya Kannery <supriyak@in.ibm.com>

The v2 migration protocol had a limit on cookie length that was
too small to be useful for QEMU. Avoid generating cookies with
v2 protocol, so that old libvirtd can still reliably migrate a
guest to new libvirtd uses v2 protocol.

* src/qemu/qemu_driver.c: Avoid migration cookies with v2
  migration

When generating a cookie for a guest with no data, the
QEMU_MIGRATION_COOKIE_GRAPHICS flag was set even if no
graphics data was added. Avoid setting the flag unless
it was needed, also add a safety check for mig->graphics
being non-NULL

* src/qemu/qemu_migration.c: Avoid cookie crash for guest
  with no graphics

The internal virDomainMigratePeer2Peer and virDomainMigrateDirect
helper methods were not checking whether the target supports the
v3 migration protocol.

* src/libvirt.c: Use v3 migration protocol for p2p/direct
  migration if available.

Some bogus apps are generating a VNC/SPICE/RFB listen attribute
with no content. This then causes a failure with the graphics
migration cookie parsing. Blank out the 'listenAddr' parameter
after parsing domain XML if it is the empty string, so the host
default takes over

* src/qemu/qemu_migration.c: Blank out listenAddr parameter
  if empty

The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.

* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.

Clang couldn't quite see that the same condition of
(flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that
the second block is guaranteed that def was assigned in
the first block.

* src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint
for clang.

Ramon de Carvalho Valle reported a problem with:
virsh connect qemu:///system
as a non-root user.  The real root problem appears to be a regression
in libvirtd being auto-started on the default qemu:///session URI;
however, the symptom points to an independent flaw in virsh - we
shouldn't be wasting efforts on making a connection if we aren't going
to be using that connection.  Fixing virsh avoids Ramon's issue, while
I work in the meantime to fix the real libvirtd regression.

This patch looks big, but that's because 'gcc -Wmissing-field-initializers'
gets triggered by './autobuild.sh --enable-compile-warnings=error', so I
had to add 0 initialization to everyone (rather than my preference of
just adding the non-zero flags to virshCmds and to cmdConnect).

Meanwhile, if you use 'virsh -c URI', the connection must succeed; this
patch _only_ optimizes the default connection to be deferred to a later
point where we know if a particular command to be run needs a connection.

* tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag.
(vshCmdDef): Add new flags field.
(vshCommandRun): Honor new flag.
(domManagementCmds, domMonitoringCmds, storagePoolCmds)
(storageVolCmds, networkCmds, nodedevCmds, ifaceCmds)
(nwfilterCmds, secretCmds, virshCmds, snapshotCmds)
(hostAndHypervisorCmds): Populate new field.
(vshReconnect): Don't warn on initial connection.

Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.

Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.

Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).

Add subset handling to libxl and test drivers.

params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).

Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.

Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.