libvirt's network config documents that a bridge's STP "forward delay"
(called "delay" in the XML) should be specified in seconds, but
virNetDevBridgeSetSTPDelay() assumes that it is given a delay in
milliseconds (although the comment at the top of the function
incorrectly says "seconds".

This fixes the comment, and converts the delay to milliseconds before
calling virNetDevBridgeSetSTPDelay().

If a domain is pmsuspended then virsh suspend will succeed. Beside
obvious flaw, virsh resume will report success and change domain
state to running which is another mistake. Therefore we must forbid
any attempts for suspend and resume when pmsuspended.

Add qemu-agent-command to virsh to support virDomainQemuAgentCommand().
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add virDomainQemuAgentCommand() support function to python module.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add qemuDomainAgentCommand() which is generated automatically,
for .qemuDomainArbitraryAgentCommand to remote driver.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add qemuDrvDomainAgentCommand() for .qemuDomainArbitraryAgentCommand
to qemu driver.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add virDrvDomainQemuAgentCommand prototype for drivers.
Add virDomainQemuAgentCommand() for virDrvDomainQemuAgentCommand.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add a function qemuAgentArbitraryCommand() for general qemu agent command.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.
Signed-off-by: NMATSUDA Daiki <matsudadik@intellilink.co.jp>

Communication with the firewall daemon uses DBus
so if we compile with firewalld support, the dbus-devel
is required for building

For emulator, the vcpuid field is always set to -1, instead of parsing
XML for the value of it.

Several VIR_DEBUG()'s were changed to VIR_WARN() while I was testing
the firewalld support patch, and I neglected to change them back
before I pushed.

In the meantime I've decided that it would be useful to have them be
VIR_INFO(), just so there will be logged evidence of which method is
being used (firewall-cmd vs. (eb|ip)tables) without needing to crank
logging to 11. (at most this adds 2 lines to libvirtd's logs per
libvirtd start).

dnsmasq is forwarding a number of queries upstream that should not
be done.  There still remains an MX query for a plain name with no
domain specified that will be forwarded is dnsmasq has --domain=xxx
--local=/xxx/ specified. This does not happen with no domain name
and --local=// ... not a libvirt problem.

BTW, thanks again to Claudio Bley!

The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The virNetlinkEventAddClient / virNetlinkEventRemoveClient stub
impls had syntax errors in their parameter lists, using a ')'
after the second-to-last parameter instead of a ','
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If xml is not changed, error message is printed.
So check ret value instead of edit variable for error message.

This patch adds a new netlink service with NETLINK_KOBJECT_UEVENT
protocol hotplug event.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>

This patch introduce virNetlinkEventServiceStopAll() to stop
all the monitors to receive netlink messages for libvirtd.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>

This patch improve all the API in virnetlink.c to support
all kinds of netlink protocols, and make all netlink sockets
be able to join in groups.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>

Unfortunately libssh2 doesn't support all types of host keys that can be
saved in the known_hosts file. Also it does not report that parsing of
the file failed. This results into truncated known_hosts files where the
standard client stores keys also in other formats (eg.
ecdsa-sha2-nistp256).

This patch changes the default location of the known_hosts file into the
libvirt private configuration directory, where it will be only written
by the libssh2 layer itself. This prevents trashing user's known_host
file.

The libssh2 code wasn't supposed to create the known_hosts file, but
recent findings show, that we can't use the default created by OpenSSH
as libssh2 might damage it. We need to create a private known_hosts file
in the config path.

This patch adds support for skipping error if the known_hosts file is
not present and let libssh2 create a new one.

allow the user change/get emulator's period and quota when the vm is running.

This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus

This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts.  Also updates
XML Schema for new entries and docs.

This patch changes the behaviour of xml element cputune.period
and cputune.quota to limit cpu bandwidth only for vcpus, and no
longer limit cpu bandwidth for the whole guest.

The reasons to do this are:

  - This matches docs of cputune.period and cputune.quota.
  - The other parts excepting vcpus are treated as "emulator",
    and there are separate period/quota settings for emulator
    in the subsequent patches

This is a helper function to print vcpu pin info.

Introduce 2 APIs to support emulator threads in remote driver.
    1) remoteDomainPinEmulator: call driver api, such as qemudDomainPinEmulator.
    2) remoteDomainGetEmulatorPinInfo: call driver api, such as qemudDomainGetEmulatorPinInfo.
They are similar to remoteDomainPinVcpuFlags and remoteDomainGetVcpuPinInfo.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to support emulator threads pin in qemu driver.

    1) qemudDomainPinEmulator: setup emulator threads pin info.
    2) qemudDomainGetEmulatorPinInfo: get all emulator threads pin info.

They are similar to qemudDomainPinVcpuFlags and qemudDomainGetVcpuPinInfo.
And also, remoteDispatchDomainPinEmulatorFlags and remoteDispatchDomainGetEmulatorPinInfo
functions are introduced.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to support emulator threads pin.
    1) virDomainEmulatorPinAdd: setup emulator threads pin with a given cpumap string.
    2) virDomainEmulatorPinDel: remove all emulator threads pin.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Emulator threads should also be pinned by sched_setaffinity(), just
the same as vcpu threads.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce qemuSetupCgroupEmulatorPin() function to add emulator
threads pin info to cpuset cgroup, the same as vcpupin.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

vcpu threads pin are implemented using sched_setaffinity(), but
not controlled by cgroup. This patch does the following things:

    1) enable cpuset cgroup
    2) reflect all the vcpu threads pin info to cgroup
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

1. add a new function virDomainVcpuPinDefCopy
2. make virDomainVcpuPinDefFree non-static