Move QEMU_DRIVE_HOST_PREFIX into the qemu_alias.c to dissuade future
callers from using it. Create qemuAliasDiskDriveSkipPrefix in order
to handle the current consumers that desire to check if an alias has
the drive- prefix and "get beyond it" in order to get the disk alias.

Rather than open code build the drive alias command in multiple places,
use the helper to ensure consistency.

Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.

Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h

Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".

The qemuDomainSnapshotCreateSingleDiskActive open coded generating the
disk drive alias. Let's use the common function.

Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.

Modify the error/exit path to match what was done for Virtio and SCSI.
If nothing else it'll have a consistent look'n'feel

As commit id 'e2b86f58' notes, when mode=agent possibly setting the
fake reboot flag to true wouldn't be necessary; however, it doesn't
"force" the issue by just ensuring the fake reboot is false, so this
patch adds the explicit setting for the reboot path.

More investigation and details can be found in commit id '8be502fd'
as well as in the archives at:

  https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html

Conditional setting of the fake reboot flag should only happen for
the acpi mode shutdown path; however, for the agent mode shutdown,
the fake reboot should be cleared. This patch will essentially revert
commit id '8be502fd', but adds an explicit setting of the flag to false
when using mode=agent while also only conditionally setting the reboot
flag if the guest went away. This also avoids an issue where a shutdown
with reboot semantics is done from agent mode which sets the reboot
flag followed by a shutdown from within the guest which would result
in a reboot due to the fake reboot flag being set. The change will
also properly handle the cases described in the following archive post:

  https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html

To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.

To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Use a temporary pointer rather than always recalculating the index in a
very verbose way.

Add a structure to store the data and use a single array of the
structures rather than having 3 separate arrays with shared indexes.

When reset was called from a domain that crashed we didn't change the
crashed state into a paused one which could confuse users.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269575Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Until now we simply errored out when the translation from pool+volume
failed.  However, we should instead check whether that disk is needed or
not since there is an option for that.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1168453Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is an error reset following the function and check for
startupPolicy before that.  Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Ever since virDomainCreateWithFlags() was introduced by de3aadaa
[drivers: add virDomainCreateWithFlags if virDomainCreate exists], the
domain ID retrieved with virDomainGetID() was incorrect for several
drivers after virDomainCreateWithFlags() was called. The API consumer
had to look up the domain anew to retrieve the correct ID.

For the ESX driver, this was fixed in 6139b274 [esx: Update ID after
starting a domain]. For the openvz driver, it was fixed in fd81a097
[openvzDomainCreateWithFlags: set domain id to the correct value]. The
test driver, the OpenNebula driver (removed in the meantime) and the
vbox driver were already updating the domain ID correctly in
domainCreate().

Copy over the ID in qemuDomainCreateWithFlags() to fix this for the qemu
driver, too.

Fixes: de3aadaa ("drivers: add virDomainCreateWithFlags if virDomainCreate exists")
Reported-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Consider the following XML snippet:

    <memory model=''>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
    </memory>

Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virJSONValueObjectCreate only consumes the object on success, so on
failure we must free - from commit id 'f4441017' (found by Coverity).

The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Is necessary to call it from other contexts, such as qemuDomainGetStatsBalloon.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.

This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.

Avoid a large block by tweaking the condition skipping empty drives and
split up the switch containing two branches having different purpose.

The disk source formatting code grew rather ugly and complex and it will
get worse. Extract it into a separated function to contain the mess.

Extract the code so that it can be called from multiple places. This
also removes a tricky fallthrough in the large switch in
qemuBuildNetworkDriveStr.

The function builds also non-uri strings for the various protocols.

Allow using 'ssh' protocol in backing chains and later for disks
themselves.

The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.

For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.

For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.

Purely cosmetic change to be consistent with the other names.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the ccw address set
from the domain definition.

Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Credit goes to Cole Robinson.