The migrate hook will affect the migrated guest definition. Allow
these domains be marked as tainted in the libxl driver.

To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Support USB controller hot-plug and hot-unplug.

 #virsh attach-device dom usbctrl.xml
 #virsh detach-device dom usbctrl.xml
 usbctrl.xml example:
 <controller type='usb' index='0' model='qusb2'>
Signed-off-by: NChunyan Liu <cyliu@suse.com>

To support USB Controller in xen guest domains, just add
USB controller in domain config xml as following:
<controller type='usb' model='qusb2' ports='4'/>
Signed-off-by: NChunyan Liu <cyliu@suse.com>

According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.

To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Construct the query string by using virBufferTrim rather than having to
remember to add a space and simplify cleanup path.

Use a temporary pointer rather than always recalculating the index in a
very verbose way.

Add a structure to store the data and use a single array of the
structures rather than having 3 separate arrays with shared indexes.

Let's cleanly differentiate what wiping a volume does for ploop and
other volumes so it's more readable what is done for each one instead of
branching out multiple times in different parts of the same function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Some functions use volume specification merely to use the target path
from it.  Let's change it to pass the path only so that it can be used
for other files than just volumes.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This is done in order to call them in next patches from each other and
definitions would be missing otherwise.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When reset was called from a domain that crashed we didn't change the
crashed state into a paused one which could confuse users.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269575Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 0c56d943 forgot to return false in the cmdConnect command
after the clean up made there.

Before (assuming you don't have uri alias for 'asdf'):
  $ virsh connect asdf
  error: failed to connect to the hypervisor

  $ echo $?
  0

After (with the same assumption):
  $ virsh connect asdf
  error: failed to connect to the hypervisor
  error: no connection driver available for asdf

  $ echo $?
  1

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356461Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Until now we simply errored out when the translation from pool+volume
failed.  However, we should instead check whether that disk is needed or
not since there is an option for that.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1168453Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is an error reset following the function and check for
startupPolicy before that.  Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

* docs/news.html.in: updated for release
* po/*.po*: regenerated

This reverts commit 6a408011.
release of 2.1.0 need to go first

Once the SASL authentication process has successfully passed, we should also
save the SASL username used to client's identity, so that when a client like
virt-admin tries to obtain it, the server will actually format the username to
the response data.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

When commit 4a0e9108 added a support for client information retrieval, it made
the API return SASL identity info only for clients connected remotely, yet SASL
can be happily used with UNIX sockets as well.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

When wiping a volume we just rewrite all the data of the volume, not
only the content.  Since format gets overridden, we need to recreate the
volume.  However we can't do that for every possible format out there.
Since it was only coded for the ploop volume type, let's document what
might be the consequences instead of forbidding it for every other
format out there.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868771Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The only function that we currently use from glib is g_sprintf().
That's a very big gun for such small target. Not only that, but
we've silently relied on wireshark dragging in the glib. Replace
the g_sprintf() with plain sprinf() so that we can drop the glib
dependency.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

  This patch reflects cases when <interface> element and its <source>
subelement for network type are formated based on actual type resolved
from referenced network instead of original one. networkAllocateActualDevice
and virDomainActualNetDefContentsFormat are taken as reference.

Ever since virDomainCreateWithFlags() was introduced by de3aadaa
[drivers: add virDomainCreateWithFlags if virDomainCreate exists], the
domain ID retrieved with virDomainGetID() was incorrect for several
drivers after virDomainCreateWithFlags() was called. The API consumer
had to look up the domain anew to retrieve the correct ID.

For the ESX driver, this was fixed in 6139b274 [esx: Update ID after
starting a domain]. For the openvz driver, it was fixed in fd81a097
[openvzDomainCreateWithFlags: set domain id to the correct value]. The
test driver, the OpenNebula driver (removed in the meantime) and the
vbox driver were already updating the domain ID correctly in
domainCreate().

Copy over the ID in qemuDomainCreateWithFlags() to fix this for the qemu
driver, too.

Fixes: de3aadaa ("drivers: add virDomainCreateWithFlags if virDomainCreate exists")
Reported-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

==2064442== 200 (88 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 54 of 73
==2064442==    at 0x4C2E0F0: calloc (vg_replace_malloc.c:711)
==2064442==    by 0x18E75B80: virAllocVar (viralloc.c:560)
==2064442==    by 0x18EC43B0: virObjectNew (virobject.c:193)
==2064442==    by 0x18EC476E: virObjectLockableNew (virobject.c:219)
==2064442==    by 0x1906BC73: virSecurityManagerNewDriver (security_manager.c:93)
==2064442==    by 0x1906C076: virSecurityManagerNewStack (security_manager.c:115)
==2064442==    by 0x43CC39: qemuTestDriverInit (testutilsqemu.c:548)
==2064442==    by 0x4337ED: mymain (qemumonitorjsontest.c:2440)
==2064442==    by 0x43BABE: virTestMain (testutils.c:982)
==2064442==    by 0x43A490: main (qemumonitorjsontest.c:2558)

Consider the following XML snippet:

    <memory model=''>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
    </memory>

Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In wireshark commit bbdd89b9 (contained in 2.1.0 release) they
have changed prototype of dissector function. Now it returns
number of bytes consumed by the dissector, and can get a pointer
to user specified data (which we don't use).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virJSONValueObjectCreate only consumes the object on success, so on
failure we must free - from commit id 'f4441017' (found by Coverity).

https://bugzilla.redhat.com/show_bug.cgi?id=1356436

Commit id '56057900' altered the discovery of iSCSI node targets by
using the "--op nonpersistent". This caused issues for clean environments
or if by chance a "-m node -o delete" was executed.

Since each iSCSI Storage Pool has the required iSCSI target path, use
that and the virISCSINodeNew API in order to generate the iSCSI node record.

https://bugzilla.redhat.com/show_bug.cgi?id=1356436

According to RFC 3721 (https://www.ietf.org/rfc/rfc3721.txt), there are
two ways to "discover" targets in/for the iSCSI environment. Discovery
is the process which allows the initiator to find the targets to which
it has access and at least one address at which each target may be
accessed.

The method currently implemented in libvirt using the virISCSIScanTargets
API is known as "SendTargets" discovery. This method is more useful when
the target IP Address and TCP port information are available, e.g. in
libvirt terms the "portal". It returns a list of targets for the portal.
From that list, the target can be found. This operation can also fill an
iSCSI node table into which iSCSI logins may occur. Commit id '56057900'
altered that filling by adding the "--op nonpersistent" since it was
not necessarily desired to perform that for non libvirt related targets.

The second method is "Static Configuration". This method not only needs
the IP Address and TCP port (e.g. portal), but also the iSCSI target name.
In libvirt terms this would be the device path field from the iSCSI pool
<source> XML. This patch implements the second methodology using that
required device path as the targetname.