There's a couple reports of things failing in this area (bug 1259070),
but it's tough to tell what's going wrong without stderr from
qemu-bridge-helper. So let's report stderr in the error message

Couple new examples:

virbr0 is inactive:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device

bridge isn't on the ACL:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=access denied by acl file

The xenXMConfigCacheRefresh method scans /etc/xen and loads
all config files it finds. It then scans its internal hash
table and purges any (previously) loaded config files whose
refresh timestamp does not match the timestamp recorded at
the start of xenXMConfigCacheRefresh(). There is unfortunately
a subtle flaw in this, because if loading the config files
takes longer than 1 second, some of the config files will
have a refresh timestamp that is 1 or more seconds different
(newer) than is checked for. So we immediately purge a bunch
of valid config files we just loaded.

To avoid this flaw, we must pass the timestamp we record at
the start of xenXMConfigCacheRefresh() into the
xenXMConfigCacheAddFile() method, instead of letting the
latter call time(NULL) again.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Mock libraries are not built with testutils.c, but there's one which
uses VIR_TEST_DEBUG.  But because that debug should be an error, if we
change it, then it will not only be more semantically correct, but mingw
compiler will be happier as well.

It also follows suit with all other mock libraries.

For few other things, used in this file, need libvirt.la to be added
into LIBADD for mingw as well.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

commit 4b53d0d4 "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

We have a new libvirt-appdev-guide-python which we need to
promote to users. Rewrite the existing page to mention it
too. Also use the new URL location which is automatically
refreshed once a day.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.

Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.

This capability can be used to detect whether or not the QEMU
binary supports the virtio-net-* network device.

This capability can be used to detect whether or not the QEMU
binary supports the e1000 network device.

This capability can be used to detect whether or not the QEMU
binary supports the rtl8139 network device.

Commit f1f68ca3 did not report an error if virFileMakePath()
returned -1.  Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:

  $ virsh start arm
  error: Failed to start domain arm
  error: An error occurred, but the cause is unknown

to:

  $ virsh start arm
  error: Failed to start domain arm
  error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
  a directory

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit e5470dd0.

This has been ACK'd by the original author in the original mail thread:
https://www.redhat.com/archives/libvir-list/2015-September/msg00310.html

The reason to revert this is due to the patch breaking the generation of
internal subsites.  The original issue still needs to be dealt with,
though.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.

Double semicolons have special meaning in makefiles, but they would have
to be combined with other rules witch such separators in order to be
used as intended.  Since there are no other rules like that, let's
clean it up.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 35847860 Added the virFileUnlink function, but failed to add
a version for mingw build, causing the following error:

  Cannot export virFileUnlink: symbol not defined
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1260846

Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Running valgrind on a very simplistic program consisting only of
opening and closing admin connection (virAdmConnect{Open,Close}) shows a
leak in remoteAdminPrivNew, because the last reference to privateData is
not decremented, thus the object won't be disposed. This patch unrefs
the privateData object once we closed the active connection to daemon,
making further use of this connection  useless.

==24577==    at 0x4A089C7: calloc (in /usr/lib64/valgrind/vgpreload_***linux.so)
==24577==    by 0x4E8835F: virAllocVar (viralloc.c:560)
==24577==    by 0x4EDFA5C: virObjectNew (virobject.c:193)
==24577==    by 0x4EDFBD4: virObjectLockableNew (virobject.c:219)
==24577==    by 0x4C14DAF: remoteAdminPrivNew (libvirt-admin.c:152)
==24577==    by 0x4C1537E: virAdmConnectOpen (libvirt-admin.c:308)
==24577==    by 0x400BAD: main (listservers.c:39)

==24577== LEAK SUMMARY:
==24577==    definitely lost: 80 bytes in 1 blocks
==24577==    indirectly lost: 840 bytes in 6 blocks
==24577==      possibly lost: 0 bytes in 0 blocks
==24577==    still reachable: 12,179 bytes in 199 blocks
==24577==         suppressed: 0 bytes in 0 blocks

https://bugzilla.redhat.com/show_bug.cgi?id=1172544

https://bugzilla.redhat.com/show_bug.cgi?id=1254420Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Let's move some variables from an inside loop to global function
declaration header block. It's going to be easier for next
patches. At the same time, order the cleanup calls at the
function's end so it's easier to track which variables are freed
and which not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In e755186c we tried to introduce an example demonstrating
new virDomainRename API. Unfortunately, in the .gitignore we had
a different binary listed. It's 'rename' binary which we want git
to ignore, not 'test'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit e755186c added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Remove the need for a couple of sa_asserts.

Coverity claims it could be possible to call virDBusTypeStackFree with
*stack == NULL and although the two API's that call it don't appear to
allow that - I suppose it's better to be safe than sorry

In virFileNBDDeviceFindUnused if virFileNBDDeviceIsBusy returns 0,
then both branches jumped to cleanup, so just use ignore_value
since the function returns NULL or some memory and the caller
handles the error.

Commit id '692e9fac' used virProcessSetNamespaces instead of inlining
the similar functionality; however, Coverity notes that the function
prototype expects a size_t value and not an enum and complains. So,
just typecast the enum as a size_t to avoid the noise.

Commit id '2e7cea24' added a check for an error from Finish instead
of 'unexpected error'; however, if for some reason there wasn't an
error, then virGetLastError could return NULL resulting in the
NULL pointer deref to err->domain.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

And in the middle it prints out its name to demonstrate changes in later
patch(es).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Creating ACL rules is not exactly easy and existing examples are pretty
simple. This patch adds a somewhat complex example which defines several
roles. Admins can do everything, operators can do basic operations
on any domain and several groups of users who act as operators but only
on a limited set of domains.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1258361

When attaching a disk, controller, or rng using an address type ccw
or s390, we need to ensure the support is provided by both the machine.os
and the emulator capabilities (corollary to unconditional setting when
address was not provided for the correct machine.os and emulator.

For an inactive guest, an addition followed by a start would cause the
startup to fail after qemu_command builds the command line and attempts
to start the guest. For an active guest, libvirtd would crash.

Rather than have different usages of STR function in order to determine
whether the domain is s390-ccw or s390-ccw-virtio, make a single API
which will check the machine.os prefix. Then use the function.

There's no reason why debug initialization could not be made completely
hidden, just like readline initialization is. The point of the global
initializer vshInit is to make initialization of smaller features transparent
to the user/caller.

Currently, we set interactive mode as default possibly reverting the
setting after we parse the command line arguments. There's nothing
particulary wrong with that, but a call to vshReadlineInit is performed
always in the global initializer just because the default mode is interactive.
Rather than moving vshReadlineInit call somewhere else (because another client
might want to implement interactive mode only), we could make the decision
if we're about to run in interactive mode once the command line is parsed.

Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.

As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.

Remove redundant error reporting in libxlDomainMigrationPerform().
virNetSocketNewConnectTCP() is perfectly capable of reporting
sensible errors.

Commit d091518b tried to escape all strings in produced XML, but missed
this one.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Before libvirt sets the MAC address of the physdev (the physical
ethernet device) linked to a macvtap passthrough device, it always
saves the previous MAC address to restore when the guest is finished
(following a "leave nothing behind" policy). For a long time it
accomplished the save/restore with a combination of
ioctl(SIOCGIFHWADDR) and ioctl(SIOCSIFHWADDR), but in commit cbfe38c
(first in libvirt 1.2.15) this was changed to use netlink RTM_GETLINK
and RTM_SETLINK commands sent to the Physical Function (PF) of any
device that was detected to be a Virtual Function (VF).

We later found out that this caused problems with any devices using
the Cisco enic driver (e.g. vmfex cards) because the enic driver
hasn't implemented the function that is called to gather the
information in the IFLA_VFINFO_LIST attribute of RTM_GETLINK
(ndo_get_vf_config() for those keeping score), so we would never get
back a useful response.

In an ideal world, all drivers would implement all functions, but it
turns out that in this case we can work around this omission without
any bad side effects - since all macvtap passthrough <interface>
definitions pointing to a physdev that uses the enic driver *must*
have a <virtualport type='802.1Qbh'>, and since no other type of
ethernet devices use 802.1Qbh, libvirt can change its behavior in this
case to use the old-style.  ioctl(SIOC[GS]IFHWADDR).  That's what this
patch does.

Resolves:  https://bugzilla.redhat.com/show_bug.cgi?id=1257004