This reverts commit 383ebc46.

We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.

To avoid confusion about usage of this function explicitly document that
this function returns copy of the attribute string.

Users may want to specify XML entities in paths to devices. Ensure they
are parsed and used properly.

Reported by John Ferlan.

These two flags in fact are mutually exclusive. Requesting them both
doesn't make any sense regardless of hypervisor driver. Hence, we have
to make it within libvirt.c file instead of fixing it in each driver.

Add qed for dirfs pool.
Add ocfs2 for disk pool.
Add lvm2 for disk and logical pool.
Add cifs and glusterfs for netfs pool.

Note: POOL_DISK_LVM2 can not be created by "parted mklabel", but is only
returned from auto-detection on disk pools.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Eugene Marcotte reported that if gcrypt-devel (a prereq of
gnutls-devel) is not present, then compilation fails due to
an unconditional use of <gcrypt.h>.

* src/libvirt.c (includes): Properly guard use of gcrypt.h.

This reverts commit 0bbbd42c.

The design for this feature is not complete, and may change the
name of the 'schid' attribute.  Revert requested by Viktor Mihajlovski.

This reverts commit 24aa7f8d.

The implementation to match the documentation is not complete yet,
and the final design might change the name of the 'schid' attribute.

virStrToLong(..., 8, ...) already requires the mode to be octal.
Change the relax-ng schema to check for octal as well.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

virstoragetest was failing on RHEL 5, but with no good error message:

TEST: virstoragetest
                                        0   FAIL

It turns out that qemu-img was so old, that it lacked support for
-o backing_file.  It didn't help that the test was also using
qemu-img from PATH, even after first probing for kvm-img.

* tests/virstoragetest.c (testPrepImages): Consistently use
discovered binary.  Skip instead of fail if qemu-img fails during
setup.

This fixes a potential NULL deref identified by John Ferlan
<jferlan@redhat.com> if scandir() didn't return an expected value.

The parallels storage driver declared some loop variables
inside the for(;;). This is not allowed by libvirt coding
standards
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This change tried to fix a crash with changing CDROM media but
failed to actually do so

  commit d0172d2b
  Author: Osier Yang <jyang@redhat.com>
  Date:   Tue Feb 19 20:27:45 2013 +0800

    qemu: Remove the shared disk entry if the operation is ejecting or updating

It was still accessing disk->src, when the entire 'disk' object
has been free'd already. Even if it weren't free'd, accessing
the 'src' value of virDomainDiskDef is not allowed without
first validating disk->type is file or block. Just remove the
broken code entirely.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On RHEL 5, 'make check' included failures such as:

TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata

It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided.  We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.

This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).

* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.

On RHEL 5, I noticed this test failure message:

TEST: qemumonitorjsontest
libvirt not compiled with yajl, skippingSKIP: qemumonitorjsontest

* tests/virstoragetest.c (testPrepImages): Use simpler fputs.
* tests/qemumonitorjsontest.c (mymain): Ensure trailing newline.

VIR_ERR_NO_CONNECT already contains "no connection driver available".

This patch changes:
no connection driver available for No connection for URI hello
to:
no connection driver available for hello

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=851413

Currently we call virSetDeviceUnprivSGIO with val == 0 if a block device
has an sgio attribute.  But for sgio='filtered', we know that a
kernel with no unpriv_sgio support will always behave as the user
wanted.  In this case, there is no need to call the function and
report a (bogus) error.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.

Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.

* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.

On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine).  The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed.  I also noticed
that if I got the segfault, I was seeing messages such as:

2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor

which is also evidence of deferencing a stale pointer.  I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.

* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.

If virCondInit fails (okay, so that's unlikely), then we end up
attempting a virObjectUnlock() on the cleanup path, even though
we don't hold a lock.  This is not guaranteed to be safe.  While
at it, I noticed a couple places where we were referencing mon->fd
outside locks.

* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal): Minimize lock
duration.  mon->watch doesn't need clean up on error.
(qemuMonitorGetBlockExtent, qemuMonitorBlockResize): Don't
dereference fd outside of lock.

I built without yajl support, and noticed a strange failure message
in qemumonitorjsontest:

2013-02-22 16:12:37.503+0000: 19812: error : virJSONValueToString:1119 : internal error No JSON parser implementation is available
2013-02-22 16:12:37.503+0000: 19812: error : qemuMonitorJSONCommandWithFd:253 : out of memory

While a later patch will fix the test to skip when json is not present,
this patch avoids overriding the more useful error message from
virJSONValueToString returning NULL.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCommandWithFd):
Don't override message.
(qemuMonitorJSONCheckError): Don't print NULL.
* src/qemu/qemu_agent.c (qemuAgentCommand): Don't override message.
(qemuAgentCheckError): Don't print NULL.
(qemuAgentArbitraryCommand): Properly fail on OOM.

The new TypedParam helper APIs allow to simplify this function
significantly.

This patch integrates the fix in 75e5bec9
by correctly ordering the setting functions instead of reordering the
parameters.

The bridge device was showing the vnet devices created for the domains
as connected to the bridge. libvirt should only show host devices when
trying to get the interface definition rather than the domain devices as
well.

uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.

Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.

Explicitly cast them to unsigned int for printing.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

The uid_t|gid_t values are explicitly casted to "unsigned long", but the
printf() still used "%d", which is for signed values.

Change the format to "%u".
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.

This patch adds a new capability bit QEMU_CAPS_OBJECT_RNG_EGD and code
to support the egd backend for the VirtIO RNG device.

The device is added by 3 qemu command line options:
-chardev socket,id=charrng0,host=1.2.3.4,port=1234 (communication
                                                    backend)
-object rng-egd,chardev=charrng0,id=rng0 (RNG protocol client)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (the RNG device)

This patch implements support for the virtio-rng-pci device and the
rng-random backend in qemu.

Two capabilities bits are added to track support for those:

QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and
QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support.

qemu is invoked with these additional parameters if the device is
enabled:

-object rng-random,id=rng0,filename=/test/phile (to add the backend)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)

This patch adds basic configuration support for the RNG device
supporting the virtio model with the "random" and "egd" backend types as
described in the schema in the previous patch.

This patch documents XML elements used for (basic) support of virtual
RNG devices.

In the devices section in the domain XML users may specify:

For the default 'random' backend:
  <devices>
    <rng model='virtio'>
      <backend model='random'>/dev/urandom</backend>
    </rng>
  </devices>

For the slightly more advanced EGD backend:
  <devices>
    <rng model='virtio'>
      <backend model='egd' type='udp'>
        <!-- this is a definition of a character device -->
        <source mode='bind' service='1234'/>
        <source mode='connect' host='1.2.3.4' service='1234'/>
        <!-- or other valid character device configuration -->
      </backend>
    </rng>
  </devices>

For the planned random daemon/pool:
  <devices>
    <rng model='virtio'>
      <backend model='pool' pool='poolname'>class</backend>
    </rng>
  </devices>

to enable the RNG device for guests.

This patch adds a fake switch statement to force the compiler to warn
after a new device type was added. This should remind the contributor to
add the new device also to this iterator function.

Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>

Although in IPv4 one must pick either mac or name, either
can be omitted.  Similarly, for IPv6, the name
can be optionally omitted.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>