You need to sign in or sign up before continuing.
- 26 3月, 2017 2 次提交
-
-
由 Roman Bogorodskiy 提交于
Along with video and VNC support, bhyve has introduced USB tablet support as an input device. This tablet is exposed to a guest as a device on an XHCI controller. At present, tablet is the only supported device on the XHCI controller in bhyve, so to make things simple, it's allowed to only have a single XHCI controller with a single tablet device. In detail, this commit: - Introduces a new capability bit for XHCI support in bhyve - Adds an XHCI controller and tabled support with 1:1 mapping between them - Adds a couple of unit tests
-
由 Roman Bogorodskiy 提交于
* Extract filling bhyve capabilities from virBhyveDomainCapsBuild() into a new function virBhyveDomainCapsFill() to make testing easier by not having to mock firmware directory listing and hypervisor capabilities probing * Also, just presence of the firmware files is not sufficient to enable os.loader.supported, hypervisor should support UEFI boot too * Add tests to domaincapstest for the main caps possible flows: - when UEFI bootrom is supported - when video (fbus) is supported - neither of above is supported
-
- 15 3月, 2017 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Introduce config file support for the bhyve driver. The only available setting at present is 'firmware_dir' for specifying a directory with UEFI firmware files.
-
- 12 3月, 2017 2 次提交
-
-
由 Fabian Freyer 提交于
bhyve supports 'gop' video device that allows clients to connect to VMs using VNC clients. This commit adds support for that to the bhyve driver: - Introducr 'gop' video device type - Add capabilities probing for the 'fbuf' device that's responsible for graphics - Update command builder routines to let users configure domain's VNC via gop graphics. Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
-
由 Fabian Freyer 提交于
Implement the BHACE_CAP_LPC_BOOTROM capability by checking the stderr output of 'bhyve -l bootrom'. If the bootrom option is unsupported, this will contain the following output: bhyve: invalid lpc device configuration 'bootrom' On newer bhyve versions that do support specifying a bootrom image, the standard help will be printed.
-
- 11 2月, 2017 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Recently e1000 NIC support was added to bhyve; implement that in the bhyve driver: - Add capability check by analyzing output of the 'bhyve -s 0,e1000' command - Modify bhyveBuildNetArgStr() to support e1000 and also pass virConnectPtr so it could call bhyveDriverGetCaps() to check if this NIC is supported - Modify command parsing code to add support for e1000 and adjust tests - Add net-e1000 test
-
- 31 1月, 2017 1 次提交
-
-
由 Fabian Freyer 提交于
Introduce a BHYVE_CAP_AHCI32SLOT capability that shows if 32 devices per SATA controller are supported, and a bhyveProbeCapsAHCI32Slot function that probes it.
-
- 11 7月, 2016 1 次提交
-
-
由 Fabian Freyer 提交于
-
- 23 7月, 2015 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE) supports using UTC time offset via the '-u' argument to bhyve(8). By default it's still using localtime. Make the bhyve driver use UTC clock if it's requested by specifying <clock offset='utc'> in domain XML and if the bhyve(8) binary supports the '-u' flag.
-
- 12 11月, 2014 1 次提交
-
-
由 Conrad Meyer 提交于
-
- 07 4月, 2014 1 次提交
-
-
由 Wojciech Macek 提交于
- Move all capabilities functions to separate file - Add initCPU
-
- 18 3月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
If there should be some sort of separator it is better to use comment with the filename, copyright, description, license information and authors. Found by: git grep -nH '^$' | grep '\.[ch]:1:' Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 21 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
-
- 23 7月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Per the FSF address could be changed from time to time, and GNU recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html) You should have received a copy of the GNU General Public License along with Foobar. If not, see <http://www.gnu.org/licenses/>. This patch removes the explicit FSF address, and uses above instead (of course, with inserting 'Lesser' before 'General'). Except a bunch of files for security driver, all others are changed automatically, the copyright for securify files are not complete, that's why to do it manually: src/security/security_selinux.h src/security/security_driver.h src/security/security_selinux.c src/security/security_apparmor.h src/security/security_apparmor.c src/security/security_driver.c
-
- 18 12月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Don't require dlopen, but link to ole32 and oleaut32 on Windows. Don't expose g_pVBoxFuncs anymore. It was only used to get the version of the API. Make VBoxCGlueInit return the version instead. This simplifies the implementation of the MSCOM glue layer. Get the VirtualBox version from the registry. Add a dummy implementation of the nsIEventQueue to the MSCOM glue as there seems to be no direct equivalent with MSCOM. It might be implemented using the normal window message loop. This requires additional investigation.
-
- 23 3月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Replace 'method' with 'function' and get the filename's suffix right.
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 18 1月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
This stops libvirt from probing for a libvirtd on the ESX server and sets the base for the implementation of the secondary drivers.
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c, src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h, src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h, src/iptables.c, src/iptables.h, src/logging.c, src/logging.h, src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c, src/qparams.h, src/stats_linux.c, src/stats_linux.h, src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c, src/threads-win32.h, src/threads.c, src/threads.h, src/util.c, src/util.h, src/uuid.c, src/uuid.h, src/virterror.c, src/virterror_internal.h, src/xml.c, src/xml.h: Move all files into src/util/ * daemon/Makefile.am: Add -Isrc/util/ to build flags * src/Makefile.am: Add -Isrc/util/ to build flags and update for moved files * src/libvirt_private.syms: Export cgroup APIs since they're now in util rather than linking directly to drivers * src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call when built under PROXY * proxy/Makefile.am: Update for changed file locations. Remove bogus build of event.c * tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags
-
- 16 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 20 11月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 10月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 21 8月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 08 2月, 2008 1 次提交
-
-
由 Mark McLoughlin 提交于
* src/internal.h: move xstrol() variants from here ... * src/util.[ch]: ... to here and rename to virStrToLong() * src/libvirt_sym.version: export __virStrToLong_i() for virsh and qemud. * src/nodeinfo.c, src/stats_linux.c, src/virsh.c, src/xend_internal.c, qemud/qemud.c: replace xstrtol() calls with virStrToLong() * src/nodeinfo.h: don't include internal.h, which was only needed for xstrtol(), but instead include libvirt.h which is suffificient for the declarations in the header.
-
- 26 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 29 6月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
stylesheet * docs/*: regenerated * src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup, addd comments, made functions static and fixe a few bugs Daniel
-
- 27 6月, 2007 10 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 16 3月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h: applied patch from Richard Jones adding check to printf-like functions and fixing the problems raised Daniel
-
- 23 2月, 2007 2 次提交
-
-
由 Mark McLoughlin 提交于
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart requests and replies to the protocol. * src/qemu_internal.c: hookup the qemu driver autostart methods * qemud/dispatch.c, qemud/driver.[ch], internal.h: add the daemon side, but just set an in-memory autostart flag for now.
-
由 Mark McLoughlin 提交于
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that qemudDispatchDomainStart() doesn't report an error if the uuid lookup fails and also move the uuid lookup into the driver so that it matches the way we do Destroy().
-
- 15 2月, 2007 1 次提交
-
-
由 Mark McLoughlin 提交于
* include/libvirt/libvirt.h.in, src/libvirt.c: add virNetworkGetBridgeName() to allow finding out what bridge to connect to in order to join a network. * src/driver.h: add networkGetBridgeName() to vtable. * qemud/protocol.h: add the request and reply to the qemud protocol. * qemud/dispatch.c, qemud/driver.[ch]: handle them here. * src/qemu_internal.c: implement GetBridgeName() in the qemu driver. * src/libvirt_sym.version: add new symbol.
-