The function call esxVI_LookupVirtualMachineByName(occurrence =
OptionalItem) and then checks if @virtualMachine is NULL. If it
is an error is reported. The same result can be achieved by
setting occurrence to RequiredItem.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When reviewing 00d9edfe I've changed proposed patch and
made it to not report error if no domain is found. This is wrong
and the original patch was okay. Thing is, both callers pass
occurrence = OptionalItem so no error message overwriting is done
as I thought initially.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

from src/qemu/qemu_domain_address.c to src/conf/domain_addr.c
and rename to virDomainCCWAddressSetCreateFromDomain

(rename to have Address in full instead of Addr to follow
the naming convention of other virDomainCCWAddress functions)
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

AMD x86 CPUs have two separate ways to mitigate the Speculative Store
Bypass hardware flaw. In current processors only non-architectural MSRs
are available, and so hypervisors must expose a virtualized MSR and CPU
flag "virt-ssbd" (CPUID Function 8000_0008, EBX[25]=1).

In future processors AMD will provide an architectural MSR, indicated by
existance of the CPUID Function 8000_0008, EBX[24]=1, to which QEMU has
given the name "amd-ssbd".

The "amd-ssbd" flag should be used in preference to "virt-ssbd", if it
is available, since it provides improved performance. For virtual
machine configuration, both should be exposed when available, to allow
for maximal guest OS compatibility as not all guests yet support both.

If future processes are not vulnerable to the flaw, this will be
indicated by the existance of CPUID Function 8000_0008, EBX[26]=1,
to which QEMU has given the name "amd-no-ssb".

See also 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
from:

  https://bugzilla.kernel.org/show_bug.cgi?id=199889

Note that neither amd-ssbd or amd-no-ssb will be reported by the kernel
in /proc/cpuinfo. It knows about these CPUID bits and does the right thing,
but doesn't report their existance as distinct flags in /proc/cpuinfo.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently we format the serial, geometry and error policy on the -drive
backend argument.

QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.

We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.

Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The private data of a virStorageSource which is backing an iSCSI hostdev
may be NULL if no authentication is present. The code handling the
hotplug would attempt to extract the authentication info stored in
'secinfo' without checking if it is allocated which resulted in a crash.

Here we opt the easy way to check if srcPriv is not NULL so that we
don't duplicate all the logic which selects whether the disk source has
a secret.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1597550Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This argument is not used anymore. The only function that is
passing non-NULL (qemuDomainSaveMemory) does not actually care
for the value (after 23087cfd) and every other caller just
passes NULL anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Instead of duplicating code to do the same checking. Now all functions
of virHypervisorDriver from esx driver are using this macro.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The same pattern is used in lots of other places.
Also, reporting error message is not desired because all callers
check the return value and report errors on their own.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When using domxml-to-native, we must generate CLI args that can be used
in a standalone scenario. This means no FD passing can be used. To
achieve this we must clear the QEMU_CAPS_CHARDEV_FD_PASS capability bit.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This makes the feature fully operational.

https://bugzilla.redhat.com/show_bug.cgi?id=1525599Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Call the internal version of qemuMonitorGetAllBlockStatsInfo API and
rename the test accordingly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

testQemuMonitorJSONqemuMonitorJSONGetBlockStatsInfo added 4 replies but
only one was used. Additionally the comment stated that 7 replies are
going to be added.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The processing code which prepares images should be executed really only
for the images which were detected. The code actually tried to update
the last user-specified layer as well. Thankfully we don't do anything
that would be a problem at this point.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1515533

The @prefix attribute to <ip/> element for interface type user is
optional. Therefore, if left out it has value of zero in which
case we should not check whether it falls into <4, 27> range.
Otherwise we fail parsing domain XML for no good reason.

Broken by commit b62b8090.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>

This commit fixes a mount call inside virgroup.c file. The NULL value
into 'type' argument is causing a valgrind issue. See commit 794b576c
for more details. The best approach to fix it is moving NULL to "none"
filesytem.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

This commit fixes a lots of mount calls inside lxc_container.c file. The
NULL value into 'type' argument is causing a valgrind issue. See commit
794b576c for more details. The best approach to fix it is moving NULL
to "none" filesytem.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

When libvirtd is restarted, it checks that each guest tap device is
still attached to the bridge device that the configuration info says
it should be connected to. If not, the tap will be disconnected from
[wherever it is] and connected to [wherever it should be].

The previous code that did this did not account for:

1) the IFLA_MASTER attribute in a netdev's ifinfo will be set to
   "ovs-system" for any tap device connected to an OVS bridge, *not*
   to the name of the bridge it is attached to.

2) virNetDevRemovePort() only works for devices that are attached to a
   standard Linux host bridge. If a device is currently attached to an
   OVS bridge, then virNetDevOpenvswitchRemovePort() must be called
   instead.

This patch remedies those problems, and adds a couple of information
log messages to aid in debugging any future problem.

Resolves: https://bugzilla.redhat.com/1596176Signed-off-by: NLaine Stump <laine@laine.org>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

This makes it easier to see why libvirt has decided it must re-attach
a tap device to its bridge.
Signed-off-by: NLaine Stump <laine@laine.org>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

This function retrieves the name of the OVS bridge that the given
netdev is attached to. This separate function is necessary because OVS
set the IFLA_MASTER attribute to "ovs-system" for all netdevs that are
attached to an OVS bridge, so the standard method of retrieving the
master can't be used.
Signed-off-by: NLaine Stump <laine@laine.org>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Although commit e3497f3f noted that the LIVE option doesn't
matter and removed the call to virDomainDefCompatibleDevice,
it didn't go quite far enough and change the order of the checks
and rework the code to just handle the config change causing
a failure after virDomainObjUpdateModificationImpact updates
the @flags. Since we only support config a lot of previously
conditional code is now just inlined.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Prívozník <mprivozn@redhat.com>

Force would be used to force eject a cdrom live, since the code
doesn't support live update, remove the flag.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Prívozník <mprivozn@redhat.com>

the last use of this function was deleted in commit
    19a148b7Signed-off-by: NAnya Harter <aharter@redhat.com>

the last use of this function was deleted in commit
    1aa5e66cSigned-off-by: NAnya Harter <aharter@redhat.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

- docs/news.xml: updated for the release
Signed-off-by: NDaniel Veillard <veillard@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Once we called qemuDomainObjEnterRemote to talk to the destination
daemon during a peer to peer migration, the vm lock is released and we
only hold an async job. If the source domain dies at this point the
monitor EOF callback is allowed to do its job and (among other things)
clear all private data irrelevant for stopped domain. Thus when we call
qemuDomainObjExitRemote, the domain may already be gone and we should
avoid touching runtime private data (such as current job info).

In other words after acquiring the lock in qemuDomainObjExitRemote, we
need to check the domain is still alive. Unless we're doing offline
migration.

https://bugzilla.redhat.com/show_bug.cgi?id=1589730Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The variable is used to store the offline migration capability of the
destination daemon. Let's call it 'dstOffline' so that we can later use
'offline' to indicate whether we were asked to do offline migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1541921

In TCG mode, there are no vCPU threads and thus there's nothing
to be placed into resctrl group. Forbid such configuration.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

If we ever fail to properly set jobinfo->statsType,
qemuDomainJobInfoToParams would return -1 without setting an error.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch extends the AppArmor domain profile with file paths
the swtpm accesses for state, log, pid, and socket files.

Both, QEMU and swtpm, use this AppArmor profile.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>

The function nwfilterBindingCreateXML() is failing to compile due to a
conditional branch which leads to an undefined 'obj' variable. So 'obj'
must have an initial value to avoid compilation errors. See the problem:

  CC       nwfilter/libvirt_driver_nwfilter_impl_la-nwfilter_driver.lo
nwfilter/nwfilter_driver.c:752:9: error: variable 'obj' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
    if (virNWFilterBindingCreateXMLEnsureACL(conn, def) < 0)
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nwfilter/nwfilter_driver.c:779:10: note: uninitialized use occurs here
    if (!obj)
         ^~~
nwfilter/nwfilter_driver.c:752:5: note: remove the 'if' if its condition is always false
    if (virNWFilterBindingCreateXMLEnsureACL(conn, def) < 0)
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nwfilter/nwfilter_driver.c:742:33: note: initialize the variable 'obj' to silence this warning
    virNWFilterBindingObjPtr obj;
                                ^
                                 = NULL

This commit initialized 'obj' with NULL to fix the error properly.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1585108

When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>