Triggered a linker error on MinGW.

This commit introduces names definition for the DNS hosts file using
the following syntax:

  <dns>
    <host ip="192.168.1.1">
      <name>alias1</name>
      <name>alias2</name>
    </host>
  </dns>

Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
Signed-off-by: NLaine Stump <laine@laine.org>

Signed-off-by: NMichal Novotny <minovotn@redhat.com>

The regression testing done by comparison of command-line
generated from the network XML file and the expected
command-line arguments (read from file).
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

The dnsmasq commandline was being built as a part of running
dnsmasq. This patch puts the commandline build into a separate
function (and exports it as a private API) making it possible to build
a dnsmasq commandline without executing it, so that we can write a
test program to verify that the proper commandlines are being created.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:

  <dns>
    <txt name="example" value="example value" />
  </dns>

Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
Signed-off-by: NLaine Stump <laine@laine.org>

Commit cd48c3f4 added a Py_ssize_t typedef for Python < 2.7.
But Py_ssize_t was added in Python 2.5. This makes the build fail
for Python 2.6.

Adjust the check to match Python < 2.5 to fix this.

getifaddrs can return an IPv6 address, but getaddrinfo can fail
for an IPv6 address. Cover this combination.

Commit 12317957 introduced an incompatible
architectural change for the AppArmor security driver. Specifically,
virSecurityManagerSetAllLabel() is now called much later in
src/qemu/qemu_process.c:qemuProcessStart(). Previously, SetAllLabel() was
called immediately after GenLabel() such that after the dynamic label (profile
name) was generated, SetAllLabel() would be called to create and load the
AppArmor profile into the kernel before qemuProcessHook() was executed. With
12317957, qemuProcessHook() is now called
before SetAllLabel(), such that aa_change_profile() ends up being called
before the AppArmor profile is loaded into the kernel (via ProcessLabel() in
qemuProcessHook()).

This patch addresses the change by making GenLabel() load the AppArmor
profile into the kernel after the label (profile name) is generated.
SetAllLabel() is then adjusted to only reload_profile() and append stdin_fn to
the profile when it is specified. This also makes the AppArmor driver work
like its SELinux counterpart with regard to SetAllLabel() and stdin_fn.
Bug-Ubuntu: https://launchpad.net/bugs/801569

When adding virDomainGetVcpusFlags in commit ea3f5c68, I did
enough rebasing that the doc comments in libvirt.c no longer
matched the final chosen enum names in libvirt.h.

And now we've gone ahead and deprecated the names
VIR_DOMAIN_VCPU_{LIVE,CONFIG}.

* src/libvirt.c (virDomainGetVcpusFlags): Fix comment.

This reverts commit 7d56a16d.

Conflicts:

	python/generator.py
	src/libvirt_public.syms

This reverts commit 6419f596.

This reverts commit d1693bb1.

Conflicts:

	daemon/remote.c
	src/remote/remote_driver.c
	src/remote/remote_protocol.x

This reverts commit 784ee08d.

This reverts commit 3e2493ce.

This reverts commit d74b86f5.

Conflicts:

	python/generator.py

This reverts commit 12cd77a0.

Conflicts:

	python/libvirt-override-virConnect.py
	python/libvirt-override.c
	src/remote/remote_protocol.x

I'm not sure when Py_ssize_t was introduced; but Fedora 14 Python 2.7
has it, while RHEL 5 Python 2.4 lacks it.  It should be easy enough
to adjust if someone runs into problems.

* python/typewrappers.h (Py_ssize_t): Define for older python.

Use NUMA's older nodemask_t (fixed-size map) rather than the newer
'struct bitmask' (variable-size) in order to still compile on RHEL 5,
with its numactl-devel-0.9.8.

* src/qemu/qemu_process.c [HAVE_NUMA]: Prefer back-compat mode.
(qemuProcessInitNumaMemoryPolicy): Use older nodemask_t.

* src/util/sysinfo.[ch]: also parse and save all the SMBIOS informations
  about memory modules

* src/util/sysinfo.c: add parsing and formatting of processor
  information data

* src/util/sysinfo.c: Separate BIOSInfo and SystemInfo part from
                      virSysinfoRead()

To ensure virnetprotocol.[ch] are generated before any other
files, add them to BUILT_SOURCES and MAINTAINERCLEANFILES.
At the same time, move ESX_DRIVER_GENERATED out of DISTCLEAN
and into MAINTAINERCLEANFILES, since they are included in
EXTRA_DIST

* src/Makefile.am: Add virnetprotocol.[ch] to BUILT_SOURCES

* src/xenxs/xen_sxpr.c (xenParseSxprPCI): Comment fix.
* tests/object-locking.ml (driverTables): Likewise.
* tests/testutils.c (virtTestDifferenceBin): Likewise.

The Makefile.am rules for generating RPC protocol had a couple
of bugs

 - A instance of remote/rpcgen_fix.pl  was not changed
   to rpc/genprotocol.pl
 - A dep from rpc/virnetmessage.h on the generated
   rpc/virnetprotocol.h was missing
 - The generated rpc/virnetprotocol.[ch] were not listed
   in MAINTAINERCLEANFILES

* Makefile.am: Fix RPC protocol generation

* src/qemu/qemu_process.c: Add missing _(...)

The qemuMigrationPrepareDirect/PrepareTunnel methods accidentally
set the domain job to  QEMU_JOB_MIGRATION_OUT when it should have
been  QEMU_JOB_MIGRATION_IN. This didn't have any ill-effect, but
it is none-the-less wrong.

* src/qemu/qemu_migration.c: Fix job type

The code emitting taint warnings was mistakenly thinking
that guests run from the QEMU session driver were tainted
for having high privileges. This is of course nonsense
since the session driver is always unprivileged

* src/qemu/qemu_domain.c: Don't warn for high privileges in
  non-privileged QEMU

If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.

* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
  upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
  commands

Migration is a multi-step process

  1. Begin(src)
  2. Prepare(dst)
  3. Perform(src)
  4. Finish(dst)
  5. Confirm(src)

At step 2, a QEMU process is lauched in the destination to
accept the incoming migration. Occasionally the process
that is controlling the migration workflow aborts, and fails
to call step 4, Finish. This leaves a QEMU process running
on the target (albeit with paused CPUs). Unfortunately because
step 2 actives a job on the QEMU process, it is unkillable by
normal means.

By registering the VM for autokill against the src virConnectPtr
in step 2, we can ensure that the guest is forcefully killed off
if the connection is closed without step 4 being invoked

* src/qemu/qemu_migration.c: Register autokill in PrepareDirect
  and PrepareTunnel. Unregister autokill on successful run
  of Finish
* src/qemu/qemu_process.c: Unregister autokill when stopping a
  process

Sometimes it is useful to be able to automatically destroy a guest when
a connection is closed. For example, kill an incoming migration if
the client managing the migration dies. This introduces a map between
guest 'uuid' strings and virConnectPtr objects. When a connection is
closed, any associated guests are killed off.

* src/qemu/qemu_conf.h: Add autokill hash table to qemu driver
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add APIs
  for performing autokill of guests associated with a connection
* src/qemu/qemu_driver.c: Initialize autodestroy map

For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.

 - In qemuDomainObjPrivatePtr we have a bool fakeReboot
   flag.
 - The virDomainReboot method sets this flag and then
   triggers a normal 'system_powerdown'.
 - The QEMU process is started with '-no-shutdown'
   so that the guest CPUs pause when it powers off the
   guest
 - When we receive the 'POWEROFF' event from QEMU JSON
   monitor if fakeReboot is not set we invoke the
   qemuProcessKill command and shutdown continues
   normally
 - If fakeReboot was set, we spawn a background thread
   which issues 'system_reset' to perform a warm reboot
   of the guest hardware. Then it issues 'cont' to
   start the CPUs again

* src/qemu/qemu_command.c: Add -no-shutdown flag if
  we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
  qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
  system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
  fakeReboot is set

Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl

* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator

To facilitate creation of new clients using XDR RPC services,
pull alot of the remote driver code into a set of reusable
objects.

 - virNetClient: Encapsulates a socket connection to a
   remote RPC server. Handles all the network I/O for
   reading/writing RPC messages. Delegates RPC encoding
   and decoding to the registered programs

 - virNetClientProgram: Handles processing and dispatch
   of RPC messages for a single RPC (program,version).
   A program can register to receive async events
   from a client

 - virNetClientStream: Handles generic I/O stream
   integration to RPC layer

Each new client program now merely needs to define the list of
RPC procedures & events it wants and their handlers. It does
not need to deal with any of the network I/O functionality at
all.

Allow RPC servers to advertise themselves using MDNS,
via Avahi

* src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow
  registration of MDNS services via avahi
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add
  API to fetch the listen port number
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to
  fetch the local port number
* src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent
  an MDNS advertisement

To facilitate creation of new daemons providing XDR RPC services,
pull a lot of the libvirtd daemon code into a set of reusable
objects.

 * virNetServer: A server contains one or more services which
   accept incoming clients. It maintains the list of active
   clients. It has a list of RPC programs which can be used
   by clients. When clients produce a complete RPC message,
   the server passes this onto the corresponding program for
   handling, and queues any response back with the client.

 * virNetServerClient: Encapsulates a single client connection.
   All I/O for the client is handled, reading & writing RPC
   messages.

 * virNetServerProgram: Handles processing and dispatch of
   RPC method calls for a single RPC (program,version).
   Multiple programs can be registered with the server.

 * virNetServerService: Encapsulates socket(s) listening for
   new connections. Each service listens on a single host/port,
   but may have multiple sockets if on a dual IPv4/6 host.

Each new daemon now merely has to define the list of RPC procedures
& their handlers. It does not need to deal with any network related
functionality at all.

This extends the basic virNetSocket APIs to allow them to have
a handle to the TLS/SASL session objects, once established.
This ensures that any data reads/writes are automagically
passed through the TLS/SASL encryption layers if required.

* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Wire up
  SASL/TLS encryption

This provides two modules for handling SASL

 * virNetSASLContext provides the process-wide state, currently
   just a whitelist of usernames on the server and a one time
   library init call

 * virNetTLSSession provides the per-connection state, ie the
   SASL session itself. This also include APIs for providing
   data encryption/decryption once the session is established

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic
  SASL handling code

This provides two modules for handling TLS

 * virNetTLSContext provides the process-wide state, in particular
   all the x509 credentials, DH params and x509 whitelists
 * virNetTLSSession provides the per-connection state, ie the
   TLS session itself.

The virNetTLSContext provides APIs for validating a TLS session's
x509 credentials. The virNetTLSSession includes APIs for performing
the initial TLS handshake and sending/recving encrypted data

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic
  TLS handling code