In 68b726b9 we tried to fix a mem leak. However, it
wasn't done quite well. Problem is, virNetDaemonGetServers() may
fail in which case virObjectListFreeCount() would be called with
-1 objects to free. But the number of elements is taken in
unsigned rather than signed integer.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

qemuStateInitialize uses a mix of VIR_ERROR and standard vir*Error
calls. Prefer the standard vir*Error

These uses of virGetLastError message are just duplicating
virGetLastErrorMessage.

Coverity pointed out that getenv("PATH") may return NULL. Well,
we check for that in virFindFileInPath() too. If this happens, we
will pass NULL into strstr(). Ouch.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The variable is dereferenced prior its check for NULL. The check
itself does not make much sense anyway - it's our test, we know
we are not passing NULL.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Patch 0b231195 refactored logging output parser to make it more readable.
This patch does similar thing to logging filter parser.

The test can return positive value even though it should have failed. It just
returns the value parser returned, which should be flipped back to -1 if
something went wrong or the result was unexpected, but it isn't.

If caller of adminConnectListServers() pass NULL instead of servers we
need to free the list we've received from virNetDaemonGetServers().
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The adminDispatchConnectListServers() function is generated by
our great perl script. However, it has a tiny flaw: if
adminConnectListServers() it calls fails, the control jumps onto
cleanup label where we try to free any list of servers built so
far. However, in the loop @i is unsigned (size_t) while @nresults
is signed (int). Currently, it does no harm because of the check
for @result being non-NULL. But if that ever changes in the
future, this bug will be hard to chase.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In an unlikely event of virConnectRegisterCloseCallback failing,
the error is ignored. This is an example file and we shouldn't
get a bad example.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Like in the rest of our code we tend to prefer 'goto' and
'cleanup' over 'if else' code structure. Do the same here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

After 9c17d665 the tap device for ethernet network type is
automatically precreated before spawning qemu. Problem is, the
qemuxml2argvtest wasn't updated and thus is failing. Because of
all the APIs that new code is calling, I had to mock a lot. Also,
since the tap FDs are labeled separately from the rest of the
devices/files I had to enable NOP security driver for the test
too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We were printing the wrong MAX value

When constructing SCSI hostdev command line for qemu, the
/sys/bus/scsi/devices/... dir is scanned. Unfortunately, even in
the tests. This is needed to determine the name of SCSI device to
passthrough to qemu, because in the domain XML we were given its
address instead. Anyway, we should not be touching live system
data in our test suite as it produced unpredictable results. The
test is regressing from 1e9a0837 on.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If a user specify network type ethernet, then create it via libvirt and run
script if it provided. After this commit user does not need to
run external script to create tap device or add root permissions to qemu
process.
Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>

Ensure the code behaves properly even for situations that were not
being considered before, such as simply detaching devices from the
host without attaching them to a guest and attaching devices as
managed even though they had already been manually detached from
the host.

Instead of forcing the values for the unbind_from_stub, remove_slot
and reprobe properties, look up the actual device and use that when
calling virPCIDeviceReattach().

This ensures the device is restored to its original state after
reattach: for example, if it was not bound to any driver before
detach, it will not be bound forcefully during reattach.

We would be just fine looking up the information in pcidevs most
of the time; however, some corner cases would not be handled
properly, so look up the actual device instead.

After this patch, ownership of virPCIDevice instances is very easy
to keep track of: for each host PCI device, the only instance that
actually matters is the one inside one of the bookkeeping list.

Whenever some operation needs to be performed on a PCI device, the
actual device is looked up first; when this is not the case, a
comment explains the reason.

Unmanaged devices, as the name suggests, are not detached
automatically from the host by libvirt before being attached to a
guest: it's the user's responsability to detach them manually
beforehand. If that preliminary step has not been performed, the
attach operation can't complete successfully.

Instead of relying on the lower layers to error out with cryptic
messages such as

  error: Failed to attach device from /tmp/hostdev.xml
  error: Path '/dev/vfio/12' is not accessible: No such file or directory

prevent the situation altogether and provide the user with a more
useful error message.

Unmanaged devices are attached to guests in two steps: first,
the device is detached from the host and marked as inactive;
subsequently, it is marked as active and attached to the guest.

If the daemon is restarted between these two operations, we lose
track of the inactive device.

Steps 5 and 6 of virHostdevPreparePCIDevices() already subtly
take care of this situation, but some planned changes will make
it so that's no longer the case. Plus, explicit is always better
than implicit.

Use qemuProcessCreatePretendCmd instead duplicating required steps from
qemuProcessStart.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Update testutilsqemu to overwrite libDir and channelTargetDir and set
private paths using domain's privateData.  This changes is required for
following patch.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Use qemuProcessCreatePretendCmd instead duplicating required steps from
qemuProcessStart.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This will skip few steps from qemuProcessStart in order to create only
qemu CMD.  Use a VIR_QEMU_PROCESS_START_PRETEND for all the qemuProcess*
functions called by this one to not modify or check host.

This new function will be used later on for XMLToNative API and also for
qemuxml2argvtest to make sure that both API and test uses the same code
as qemuProcessStart.

We need also update qemuProcessInit to wrap few lines of code with check
that VIR_QEMU_PROCESS_START_PRETEND that makes sense only for
qemuProcessStart.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Move all code that checks host and domain.  Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This change is required by following patches.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Move all code that modifies host system to this function.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Move all code that modifies only live XML to this function.  The new
VIR_QEMU_PROCESS_START_PRETEND flag will be used by qemuXMLToNative and
qemuxml2argvtest later in order to reuse the same code as
qemuProcessStart uses.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This removes the testFailed magic and makes the code more readable.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Function qemuProcessLaunch returns '-2' in case there was an error and
we need to cleanup labels.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

QEMU changed the error message to:

        "Tray of device 'drive-sata0-0-1' is not open"

and they may change the error massage in the future.

This updates the code to not depend on the text from the error message
but only on error itself.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Every aligning requires at least one cast and it's hard to read.  Let's
make a function that makes sure the pointer is moved according to the
alignment and use that to move throughout the data buffer.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Problem is that in the test any status file matching
tests/nssdata/*.status is loaded as it contains IP addresses that
are parsed. However, there's no order specified in which the
files are loaded. Therefore on different systems the order may be
different. This is then producing an unexpected results.
Instead of defining an order in which the files are loaded, make
the code that checks for missing IP addresses (or redundant ones)
cope with unordered list of addresses. The reasoning behind is
that the code doing the parsing is used in real NSS module where
we don't care for ordering.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Let's add a test for SCSI target nodedev devices.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.

Let's fix this obvious typo and also extend the XML schema to provide
validation.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.

This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.