Add an extra space before the first column as we have when listing
domains.

Previous output:

$ virsh vol-list glusterpool
Name                 Path
-----------------------------------------
asdf                 gluster://gluster-node-1/gv0/asdf
c                    gluster://gluster-node-1/gv0/c
cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
Name  Path                               Type     Capacity  Allocation
----------------------------------------------------------------------
asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B

New output:

$ virsh vol-list glusterpool
 Name                 Path
------------------------------------------------------------------------------
 asdf                 gluster://gluster-node-1/gv0/asdf
 c                    gluster://gluster-node-1/gv0/c
 cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
 Name  Path                               Type     Capacity  Allocation
------------------------------------------------------------------------
 asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
 c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
 cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B

The 'vcpucount' command is a getter command for the vCPUu count. When
one or more of the filtering flags are specified the command returns the
value only for the selected combination. In this case the --live and
--config combination isn't valid. This however didn't cause errors as
the combination of flags was rejected by the libvirt API but then the
fallback code kicked in and requested the count in a way where the clash
of the flags didn't matter.

Mark the flag combination mutually exclusive so that users aren't
confused.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1024245

Allow adjust the number of commands to remember in the command
history.

* tools/virsh.c (vshReadlineInit): Read and sanity the
VIRSH_HISTSIZE variable.
(VIRSH_HISTSIZE_MAX): New constant.
* tools/virsh.pod: Document VIRSH_HISTSIZE variable.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit e962a579 added 'attach-disk --shareable', even though we
already had 'attach-disk --mode=shareable'.  Worse, if the user
types 'attach-disk --mode=readonly --shareable', we create
non-sensical XML.  The best solution is just to undocument the
duplicate spelling, by having it fall back to the preferred
spelling.

* tools/virsh-domain.c (cmdAttachDisk): Let alias handling fix our
mistake in exposing a second spelling for an existing option.
* tools/virsh.pod: Fix documentation.
Signed-off-by: NEric Blake <eblake@redhat.com>

We want to treat 'attach-disk --shareable' as an undocumented
alias for 'attach-disk --mode=shareable'.  By improving our
alias handling, we can allow all such --bool -> --opt=value
replacements, and guarantee up front that the alias is not
mixed with its replacement.

* tools/virsh.c (vshCmddefOptParse, vshCmddefGetOption): Add
support for expanding bool alias to --opt=value.
(opts_echo): Add another alias to test it.
* tests/virshtest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

Reported in https://bugzilla.redhat.com/show_bug.cgi?id=1022872

* tools/virsh.pod: s/COMMMANDS/COMMANDS/
Signed-off-by: NEric Blake <eblake@redhat.com>

In commit b46c4787 I changed the code to
watch long running jobs in virsh. Unfortunately I didn't take into
account that poll may get a hangup if the terminal is not a TTY and will
be closed.

This patch avoids polling the STDIN fd when there's no TTY.

Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virt-login-shell binary shouldn't need to execute programs
relying on $PATH, but just in case set a fixed $PATH value
of /bin:/usr/bin
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.

The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.

Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We don't want to inherit any FDs in the new namespace
except for the stdio FDs. Explicitly close them all,
just in case some do not have the close-on-exec flag
set.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

'--print-xml' option is very useful for doing some test.
But we had to specify a real domain for it.
This patch could enable us to specify a fake domain
when using --print-xml option.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

s/it's/its
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Since 2.6.39, kernel changed the minimum weight of device blkio.
Update related docs.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Make it much easier to test a configuration built without readline
support, by reusing our existing library probe machinery.  It gets
a bit tricky with readline, which does not provide a pkg-config
snippet, and which on some platforms requires one of several
terminal libraries as a prerequiste, but the end result should be
the same default behavior but now with the option to disable things.

* m4/virt-readline.m4 (LIBVIRT_CHECK_READLINE): Simplify by using
LIBVIRT_CHECK_LIB.
* tools/virsh.c: Convert USE_READLINE to WITH_READLINE.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use virSocketAddrIsWildcard instead of STREQ to check for the ANY
address and put brackets around the address if it contains ':'.

Check return value of virStreamNew when called by cmdVolUpload and
cmdVolDownload.

'make distcheck' fails from a directory configured --without-lxc:

  GEN      virt-login-shell.1
Can't write-open ../../tools/virt-login-shell.1: Permission denied at /usr/bin/pod2man line 69.

* tools/Makefile.am (EXTRA_DIST): Ship pre-built man page.
Signed-off-by: NEric Blake <eblake@redhat.com>

It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
          autoport='yes' listen='127.0.0.1'
          defaultMode='secure'>

However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.

This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

After commit 8aecd351 it'll detect
that a required option is not defined and it will assert and exit with:

virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.

Problem has been latent since commit ed23b106.
Signed-off-by: NEric Blake <eblake@redhat.com>

completer and completer_flags added to the _vshCmdOptDef
structure so it will be possible for completion generators to
conveniently call option completer functions with desired flags.
Signed-off-by: NEric Blake <eblake@redhat.com>

Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.

Reported by GuanQiang.

The metadata modification functions will support modification of the XML
metadata. Add a virsh command to allow using this approach.

Line up the array so that the grid is visible.

The "cmd" variable is actually used so remove the attribute.

What should be checked here is xmlbuf rather than buf.

Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.
Signed-off-by: Nyangdongsheng <yangds.fnst@cn.fujitsu.com>

Signed-off-by: NAlex Jia <ajia@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1006864

Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.

Signed-off-by: NAlex Jia <ajia@redhat.com>

The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Recent patches to fix handling of Ctrl-C when interacting with
ssh are not portable to mingw, which lacks termios handling.
The simplest solution is to just compile that code out, and
if someone ever appears that has a serious interest in getting
virsh fully functional even with ssh connections, they can
provide patches at that time.

* tools/virsh.h (_vshControl): Make termattr conditional.
* tools/virsh.c (vshTTYIsInterruptCharacter)
(vshTTYDisableInterrupt, vshTTYRestore, cfmakeraw, vshTTYMakeRaw)
(main): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO

An example error message when using the wrong name:

daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE

As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.

Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.

* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Man page for signal states:

 "The effects of signal() in a multithreaded process are unspecified."

Switch signal() to sigaction in virsh console code.