Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups.  Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support.  Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).

Existing code is not affected by the new capabilities.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.

Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Time to remove the cleanup labels rendered useless in the previous
patch.  There are still plenty of other tests that could be further
simplified, but I've already spent enough time in this file for now.
Signed-off-by: NEric Blake <eblake@redhat.com>

The DO_TEST() macro in qemumonitorjsontest.c was not passing the
schema through, which meant that we were not validating any of those
tests for correct usage according to the schema.

In the process of mechanically altering tests to pass the schema
through, use VIR_AUTOPTR on all of the affected test instances. The
next patch will do some further cleanups that it exposes.

Tested by using this hack, where the test mistakenly passed pre-patch,
but correctly diagnosed the garbage post-patch:

| diff --git i/src/qemu/qemu_monitor_json.c w/src/qemu/qemu_monitor_json.c
| index 53a7de8b77..86d8450814 100644
| --- i/src/qemu/qemu_monitor_json.c
| +++ w/src/qemu/qemu_monitor_json.c
| @@ -1532,7 +1532,8 @@ qemuMonitorJSONGetStatus(qemuMonitorPtr mon,
|      if (reason)
|          *reason = VIR_DOMAIN_PAUSED_UNKNOWN;
|
| -    if (!(cmd = qemuMonitorJSONMakeCommand("query-status", NULL)))
| +    if (!(cmd = qemuMonitorJSONMakeCommand("query-status",
| +                                           "s:garbage", "foo", NULL)))
|          return -1;
|
|      if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
Suggested-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Simplify the GEN_TEST_FUNC() and target of the DO_TEST_SIMPLE() macros
by using autoptr support.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Upcoming tests are going to use VIR_AUTOPTR to simplify test cleanup.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NJohannes Holmberg <johannes.holmberg@dataductus.se>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In commit cbb4d229 I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.

Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The caller has it so there's no point in getting it again.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Pass in the schema since it works with the 'file' test now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Pass in the schema data from the caller if QMP schema testing is
desired.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Use VIR_AUTOFREE and get rid of the cleanup section.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This configuration can be used by gitdm to generate reports about
libvirt development.

The goal I was working with was being able to generate a report
for every single libvirt release and having zero "email address
as company" entries; picking different commit ranges might result
in some contributions not being accounted for.

I had to make some judgement calls when the situation was not
entirely clear-cut: when in doubt, and not finding any obvious
signs of the opposite being true, I mostly ended up dumping
people in the "unaffiliated contributions" bin. If I got it
wrong, and companies want to get recognition for their sponsored
contributions to libvirt, they can send patches.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Fabiano Fidencio was working for Red Hat when he contributed to
libvirt, Shi Lei's non-company email address contains the company
name so it's fair to assume contributions using it were made on
company time, and Adrian Brzezinski's personal email was used
for the S-o-b while the git authorship information clearly pointed
at the company being involved.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 2f2254c7 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.

Solve the issue by using virBitmapNewCopy() instead.
Reported-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The flag causes undefine to fail if trying to remove a non-RBD disk. Add
a warning about that.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.

The correct flag in that case is way less obvious: --snapshots-metadata.

Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Due to this bug the following command would fail on any host where TSC
frequency can be probed:

    $ virsh capabilities | virsh cpu-baseline /dev/stdin
    error: unsupported configuration: Invalid TSC frequency

https://bugzilla.redhat.com/show_bug.cgi?id=1641702Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717090Signed-off-by: NErik Skultety <eskultet@redhat.com>

We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>