git reset --hard 96e5a2d4
./autogen.sh
make -s
git pull
make -s    <-- expecting auto-bootstrap here, doesn't happen

Use git diff to expose whether the submodule has untracked changes,
which are typical on an incremental pull if .gnulib was updated but
the user did not manually run 'git submodule update'.

After this patch is applied, I encountered a new problem when
following the reproducing pattern.  Basically, the change to .gnulib
between libvirt's commit 96e5a2d4 and this patch introduced a change
to sys_ioctl.in.h, but gnulib (intentionally) does not make the
replacement headers depend on Makefile changes.  Therefore, I ended up
with the generated replacement header being broken:
gnulib/lib/sys/ioctl.h complained about a use of @.  But that seems
like something that should be fixed upstream in gnulib's bootstrap
script (that is, when doing a gnulib update, all files created from
.in.h file should probably be deleted).  Without the benefit of that
proposed gnulib fix, I worked around the problem by manually removing
the stale gnulib/lib/sys/ioctl.h.

* autogen.sh (t): Also run bootstrap if the gnulib submodule needs
to be updated.
* cfg.mk (_autogen): Likewise.
Reported by Matthias Bolte.

My prior patch forced an autogen.sh run, and I was surprised that the
suggested './autogen.sh' lost the fact that I had previously used
'./autogen.sh -C' for speed.

* autogen.sh: Use config.status, if present and there were no arguments.
Signed-off-by: NEric Blake <eblake@redhat.com>

* autogen.sh (bootstrap_hash): New function.
Running bootstrap may update the gnulib SHA1, yet we were computing
t=$(git submodule status ...) *prior* to running bootstrap, and
then recording that sometimes-stale value in the stamp file upon
a successful bootstrap run.  That would require two (lengthy!)
bootstrap runs to update the stamp file.

* autogen.sh (curr_status): Also include hash of bootstrap.conf
when checking for changes that require bootstrap rerun.
* cfg.mk (_update_required): Likewise.

* cfg.mk (_curr_status): Accommodate leading "+" or "-" in the output
of git submodule status.
* autogen.sh: Likewise.

Copy the latest gnulib bootstrap, which runs autoreconf and
generates po/Makevars for us.  Other improvements include some
improved prerequisite tool checking.

This also fixes a bug in the .pot files, regarding the copyright holder.

* bootstrap: Update to version in .gnulib/build-aux.
* bootstrap.conf (MSGID_BUGS_ADDRESS, COPYRIGHT_HOLDER, SKIP_PO)
(gnulib_mk, ACLOCAL, bootstrap_epilogue): Provide overrides.
* autogen.sh (autoreconf): Avoid redundant autoreconf if bootstrap
was run.
* po/Makevars: Delete, now that bootstrap creates it.
* po/.gitignore: Update.

* autogen.sh (srcdir, THEDIR, OBJ_DIR): Use proper quoting.
(.git-module-status): Abort if bootstrap fails.

Add a --system flag to autogen.sh which gets turned into the args
--prefix=/usr --sysconfdir=/etc --localstatedir=/var to make it
easy to build with settings that match an RPM build

* autogen.sh: Add --system flag

When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script.  With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status.  If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.

* autogen.sh: Use "autoreconf -if" instead of open-coding it with
manual and unconditional invocation of each separate tool.

No longer maintain a version-controlled ChangeLog file, but do
continue to include a ChangeLog file in distribution tarball.
* Makefile.am (gen-ChangeLog): New rule.
(dist-hook): Depend on it.
(EXTRA_DIST): Add ChangeLog-old.
* bootstrap (modules): Add gitlog-to-changelog.
* ChangeLog: Remove file.  Renamed to...
* ChangeLog-old: ...this.  New file.
* autogen.sh: Touch ChangeLog, to ensure it exists.  For automake.

* Makefile.cfg (local-checks-to-skip): Remove sc_trailing_blank.
* .x-sc_trailing_blank: New file, to exempt the few binary files.

New files go into these directories:
  gnulib/lib
  gnulib/m4
  gnulib/tests

* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile.  Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4.  Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file.  Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.

* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.


Author: Jim Meyering <meyering@redhat.com>

        * autogen.sh: run autoheader before automake

        * autogen.sh: run autoheader

        * config.h.in: remove

  output instructions if configure failed
Daniel

  http accesses by default and to use the provided URI otherwise,
  applied Jim Fehlig patch working around xend connection close bug
* autogen.sh: fixed package name
Daniel

  tweak a few things
Daniel

  libvir.spec.in docs/Makefile.am docs/apibuild.py docs/structures.fig
  include/Makefile.am include/libvir.h src/Makefile.am src/hash.c
  src/hash.h src/internal.h src/libvir.c src/libvir_sym.version
  src/virsh.c: renamed to libvir
Daniel

  configure to start working
* src/Makefile.am src/internal.h src/libxen.c: make the first compile
Daniel