Commit id '03e750f3' added support for checking the PLOOP type; however,
it used 'target.type' which no storage code ever fills in, so it will
never be set.  Change to just vol->type (could use vol->target.format
as well).

Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.

Example for duplicate drive addresses:
<disk>
  ...
  <target name='sda'/>
</disk>
<disk>
  ...
  <target name='sdb'/>
  <address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>

Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>

Unfortunately the fixes (1b08cc17,
8d46386b) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Comparing the parameter 'type' against the member 'bus' instead of
against the member 'type' is quite confusing. Rename the parameter
'type' to 'bus_type' to clarify its meaning.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Pass the virDomainDeviceDriveAddress as a struct instead of individual
arguments. Reworked the function descriptions.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The next release will be the first one of 2017, so the
version number will be 3.0.0 rather than 2.6.0.

* po/*.po*

Two reasons:
1.in none hotplug, we will pass it. We can see from libvirt function
qemuBuildVhostuserCommandLine
2.qemu will use this vetcor num to init msix table. If we don't pass, qemu
will use default value, this will cause VM can only use default value
interrupts at most.
Signed-off-by: Ngaohaifeng <gaohaifeng.gao@huawei.com>

To stay consistent.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

None of the other sentences in the file ends with the period,
and we want to maintain a consistent style.

Consider the following XML snippets:

  $ cat scsicontroller.xml
      <controller type='scsi' model='virtio-scsi' index='0'/>
  $ cat scsihostdev.xml
      <hostdev mode='subsystem' type='scsi'>
        <source>
          <adapter name='scsi_host0'/>
          <address bus='0' target='8' unit='1074151456'/>
        </source>
      </hostdev>

If we create a guest that includes the contents of scsihostdev.xml,
but forget the virtio-scsi controller described in scsicontroller.xml,
one is silently created for us.  The same holds true when attaching
a hostdev before the matching virtio-scsi controller.
(See qemuDomainFindOrCreateSCSIDiskController for context.)

Detaching the hostdev, followed by the controller, works well and the
guest behaves appropriately.

If we detach the virtio-scsi controller device first, any associated
hostdevs are detached for us by the underlying virtio-scsi code (this
is fine, since the connection is broken).  But all is not well, as the
guest is unable to receive new virtio-scsi devices (the attach commands
succeed, but devices never appear within the guest), nor even be
shutdown, after this point.

While this is not libvirt's problem, we can prevent falling into this
scenario by checking if a controller is being used by any hostdev
devices.  The same is already done for disk elements today.

Applying this patch and then using the XML snippets from earlier:

  $ virsh detach-device guest_01 scsicontroller.xml
  error: Failed to detach device from scsicontroller.xml
  error: operation failed: device cannot be detached: device is busy

  $ virsh detach-device guest_01 scsihostdev.xml
  Device detached successfully

  $ virsh detach-device guest_01 scsicontroller.xml
  Device detached successfully
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Although nearly all host devices that are assigned to guests using
VFIO ("<hostdev>" devices in libvirt) are physically PCI Express
devices, until now libvirt's PCI address assignment has always
assigned them addresses on legacy PCI controllers in the guest, even
if the guest's machinetype has a PCIe root bus (e.g. q35 and
aarch64/virt).

This patch tries to assign them to an address on a PCIe controller
instead, when appropriate. First we do some preliminary checks that
might allow setting the flags without doing any extra work, and if
those conditions aren't met (and if libvirt is running privileged so
that it has proper permissions), we perform the (relatively) time
consuming task of reading the device's PCI config to see if it is an
Express device. If this is successful, the connect flags are set based
on the result, but if we aren't able to read the PCI config (most
likely due to the device not being present on the system at the time
of the check) we assume it is (or will be) an Express device, since
that is almost always the case anyway.

If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.

In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.

The path to the config file for a PCI device is conventiently stored
in a virPCIDevice object, but that object's contents aren't directly
visible outside of virpci.c, so we need to have an accessor function
for it if anyone needs to look at it.

This new function just calls fstat() (if provided with a valid fd) or
stat() (if fd is -1) and returns st_size (or -1 if there is an
error). We may decide we want this function to be more complex, and
handle things like block devices - this is a placeholder (that works)
for any more complicated function.

Adding first build of year minor number reset to 0.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We can't change feature names for compatibility reasons even if they
contain typos or other software uses different names for the same
features. By adding alternative spellings in our CPU map we at least
allow anyone to grep for them and find the correct libvirt's name.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

They didn't really help anything.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

My overly sophisticated address reservation code forgot
to add an error message for user-requested ports out of range.

https://bugzilla.redhat.com/show_bug.cgi?id=1399260

This test case references ports 4 and 5 on the PIIX3 UHCI
controller which only has two.

When virt-aa-helper parses xml content it can fail on security labels.

It fails by requiring to parse active domain content on seclabels that
are not yet filled in.

Testcase with virt-aa-helper on a minimal xml:
 $ cat << EOF > /tmp/test.xml
<domain type='kvm'>
    <name>test-seclabel</name>
    <uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
    <memory unit='KiB'>1</memory>
    <os><type arch='x86_64'>hvm</type></os>
    <seclabel type='dynamic' model='apparmor' relabel='yes'/>
    <seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
 $ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
   -u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml

Current Result:
 virt-aa-helper: error: could not parse XML
 virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Only the latest APIs are fully documented and the documentation of the
older variants (which are just limited versions of the new APIs anyway)
points to the newest APIs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The enhanced documentation of VIR_MIGRATE_RDMA_PIN_ALL fixes
https://bugzilla.redhat.com/show_bug.cgi?id=1373783Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When trying to install libvirtd from sources I've noticed the
following failure:

/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....

The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.

This was introduced in 01079727.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Restarting libvirtd on the source host at the end of migration when a
domain is already running on the destination would cause image labels to
be reset effectively killing the domain. Commit e8d0166e fixed similar
issue on the destination host, but kept the source always resetting the
labels, which was mostly correct except for the specific case handled by
this patch.

https://bugzilla.redhat.com/show_bug.cgi?id=1343858Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Post-copy migration needs bi-directional communication between the
source and the destination QEMU processes, which is not supported by
tunnelled migration.

https://bugzilla.redhat.com/show_bug.cgi?id=1371358Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We had a lot of rados_conf_set and check works.
Use helper virStorageBackendRBDRADOSConfSet for them.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Thanks to the complex capability caching code virQEMUCapsProbeQMP was
never called when we were starting a new qemu VM. On the other hand,
when we are reconnecting to the qemu process we reload the capability
list from the status XML file. This means that the flag preventing the
function being called was not set and thus we partially reprobed some of
the capabilities.

The recent addition of CPU hotplug clears the
QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine does not support it.
The partial re-probe on reconnect results into attempting to call the
unsupported command and then killing the VM.

Remove the partial reprobe and depend on the stored capabilities. If it
will be necessary to reprobe the capabilities in the future, we should
do a full reprobe rather than this partial one.

QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.

We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:

    <domainCapabilities>
      ...
      <cpu>
        <mode name='host-passthrough' supported='yes'/>
        <mode name='host-model' supported='yes'>
          <model fallback='allow'>Skylake-Client</model>
          ...
        </mode>
        <mode name='custom' supported='yes'>
          <model usable='yes'>qemu64</model>
          <model usable='yes'>qemu32</model>
          <model usable='no'>phenom</model>
          <model usable='yes'>pentium3</model>
          <model usable='yes'>pentium2</model>
          <model usable='yes'>pentium</model>
          <model usable='yes'>n270</model>
          <model usable='yes'>kvm64</model>
          <model usable='yes'>kvm32</model>
          <model usable='yes'>coreduo</model>
          <model usable='yes'>core2duo</model>
          <model usable='no'>athlon</model>
          <model usable='yes'>Westmere</model>
          <model usable='yes'>Skylake-Client</model>
          ...
        </mode>
      </cpu>
      ...
    </domainCapabilities>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>