- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
Similarly to the previous commit, rename .args files. The files were renamed using the following commands. From qemuxml2argvdata: for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done and then (to fix broken symlinks) from qemuxml2argvdata and qemuxml2xmloutdata: for i in $(find . -xtype l); do \ ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i; done Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 23 11月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
Move together sections which are conditionaly executed depending on whether -device will be used together with the -drive.
-
- 11 7月, 2017 1 次提交
-
-
由 Cole Robinson 提交于
AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 12 7月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
For every but the last argument, we also need space for a space and a backslash. Rewrap everything longer than 78 characters.
-
- 07 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
-
- 23 5月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
-
- 01 3月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
Per-domain directories were introduced in order to be able to completely separate security labels for each domain (commit f1f68ca3). However when the domain name is long (let's say a ridiculous 110 characters), we cannot connect to the monitor socket because on length of UNIX socket address is limited. In order to get around this, let's shorten it in similar fashion and in order to avoid conflicts, throw in an ID there as well. Also save that into the status XML and load the old status XMLs properly (to clean up after older domains). That way we can change it in the future. The shortening can be seen in qemuxml2argv tests, for example in the hugepages-pages2 case. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 05 1月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 10 11月, 2015 4 次提交
-
-
由 Daniel P. Berrange 提交于
As of QEMU 0.10.0 the -vga argument was introduced, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.10.0 the -drive format= parameter was added, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 09 11月, 2015 1 次提交
-
-
由 Daniel P. Berrange 提交于
Back in commit bd6c46fa Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 03 3月, 2015 1 次提交
-
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1142631 This patch resolves a situation where the same "<target dev='$name'...>" can be used for multiple disks in the domain. While the $name is "mostly" advisory regarding the expected order that the disk is added to the domain and not guaranteed to map to the device name in the guest OS, it still should be unique enough such that other domblk* type operations can be performed. Without the patch, the domblklist will list the same Target twice: $ virsh domblklist $dom Target Source ------------------------------------------------ sda /var/lib/libvirt/images/file.qcow2 sda /var/lib/libvirt/images/file.img Additionally, getting domblkstat, domblkerror, domblkinfo, and other block* type calls will not be able to reference the second target. Fortunately, hotplug disallows adding a "third" sda value: $ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M $ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda error: Failed to attach disk error: operation failed: target sda already exists $ BUT, it since 'sdb' doesn't exist one would get the following on the same hotplug attempt, but changing to use 'sdb' instead of 'sda' $ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb error: Failed to attach disk error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device $ Since we cannot fix this issue at parsing time, the best that can be done so as to not "lose" a domain is to make the check prior to starting the guest with the results as follows: $ virsh start $dom error: Failed to start domain $dom error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img' $ Running 'make check' found a few more instances in the tests where this duplicated target dev value was being used. These also exhibited some duplicated 'id=' values (negating the uniqueness argument of aliases) in the corresponding .args file and of course the *xmlout version of a few input XML files.
-
- 16 1月, 2015 1 次提交
-
-
由 Erik Skultety 提交于
-