Signed-off-by: NChris Lalancette <clalance@redhat.com>

The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):

1) 'wallclock' is changed to 'track', and the possible values are 'boot'
 (corresponds to old 'host'), 'guest', and 'wall'.

2) 'mode' has an additional value 'smpsafe'

3) when tickpolicy='catchup', there can be an optional sub-element of
   timer called 'catchup':

   <catchup threshold=123 slew=120 limit=10000/>

Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".

* docs/schemas/domain.rng: updated RNG definition to account for changes

* src/conf/domain_conf.h: change the C struct and enums to match changes.

* src/conf/domain_conf.c: timer parse and format functions changed to
                          handle the new selections and new element.

* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*

* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.

virStrToLong* guarantees (via strtol) that the end pointer will be set
to the point at which parsing stopped (even on failure, this point is
the start of the input string).

* src/esx/esx_driver.c (esxGetVersion): Remove pointless
conditional.
* src/qemu/qemu_conf.c (qemuParseCommandLinePCI)
(qemuParseCommandLineUSB, qemuParseCommandLineSmp): Likewise.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetMigrationStatus): Likewise.

Since the timers are defined to cover all possible config cases for
several different hypervisors, many of these possibilities generate an
error on qemu. Here is what is currently supported:

RTC: If the -rtc commandline option is available, allow setting
"clock=host"
     or "clock=vm" based on the rtc timer clock='host|guest' value. Also
     add "driftfix=slew" if the tickpolicy is 'catchup', or add nothing
if
     tickpolicy is 'delay'. (Other tickpolicies will raise an error).

     If -rtc isn't available, but -rtc-td-hack is, add that option
     if the tickpolicy is 'catchup', add -rtc-td-hack, if it is 'delay'
     add nothing, and if it's anything else, raise an error.

PIT: If -no-kvm-pit-reinjection is available, and tickpolicy is
     'delay', add that option. if tickpolicy is 'catchup', do
     nothing. Anything else --> raise an error.

     If -no-kvm-pit-reinjection *isn't* available, but -tdf is, when
     tickpolicy is 'catchup' add -tdf. If it's 'delay', do
     nothing. Anything else --> raise an error.

     If neither of those commandline options is available, and
     tickpolicy is anything other than 'delay' (or unspecified), raise
     an error.

HPET: If -no-hpet flag is available and present='no', add -no-hpet.
      If -no-hpet is not available, and present='yes', raise an error.
      If present is unspecified, the default is to do whatever this
      particular qemu does by default, so don't raise an error.

All other timer types are unsupported by QEMU, so they will raise an
error.

* src/qemu/qemu_conf.c: extend qemuBuildClockArgStr() to generate the
  command line arguments for the new options

* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test

* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag

Add support for Qemu to have firewall rules applied and removed on VM
startup and shutdown respectively. This  patch also provides support for
the updating of a filter that causes all VMs that reference the filter
to have their ebtables/iptables rules updated.
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

To find out where the net type 'direct' needs to be handled I introduced
the 'enum virDomainNetType' in the virDomainNetDef structure and let the
compiler tell me where the case statement is missing. Then I added the
unhandled device statement to the UML driver.

* src/conf/domain_conf.h: change _virDomainNetDef type from int to
  virDomainNetType enum
* src/conf/domain_conf.c src/lxc/lxc_driver.c src/qemu/qemu_conf.c
  src/uml/uml_conf.c: make sure all enum cases are properly handled
  in switches

Before, this function would blindly accept an invalid def->dst
and then abuse the idx=-1 it would get from virDiskNameToIndex,
when passing it invalid strings like "xvda:disk" and "sda1".
Now, this function returns -1 upon failure.
* src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above.
Update callers.
* src/conf/domain_conf.h: Update prototype.
* src/qemu/qemu_conf.c: Update callers.

Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).

* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
  add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
  qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
  in qemu help
   - qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
     is in place to use it.
   - qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
     (higher levels decide whether or not to fill it in)
   - qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
     its fd to tapfds array so it isn't closed on qemu exec, and populate
     vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
  along with a note that this must be implemented in order for hot-plug of
  vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
  command is implemented).

* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
  and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
  add a specific regression test

A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.

A number of the error messages raised when parsing USB devices
refered to PCI devices by mistake

* src/qemu/qemu_conf.c: s/PCI/USB/ in qemuParseCommandLineUSB()

Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU

* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
  is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
  tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
  for timezone tests

This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.

The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
  virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
  and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  src/xen/xm_internal.c: Updated to use new structure for localtime

* src/qemu/qemu_conf.c (qemudNetworkIfaceConnect): Remove extraneous
virSaveLastError call, whose result was unused.

ACPI feature bit dropped: I asked internally if the -no-acpi option
had any meaning for IA64, and was told 'probably not'.

This patch adds the mac_filter support to the macvtap device.

This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.

* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
  qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
  openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
  qemudPhysIfaceConnect()

Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:

-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4

and the following for a virtio channel:

-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0

* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
  QEMU command line generation

Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:

<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
  <target type='virtio' name='org.linux-kvm.port.0'/>
  <address type='virtio-serial' controller='0' bus='0'/>
</channel>

* docs/schemas/domain.rng: Add virtio-serial controller and virtio
  channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
  virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
  parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
  virDomainDefAddDiskControllers() renamed to
  virDomainDefAddImplicitControllers()

Currently we just error with ex. 'virbr0: No such device'.

Since we are using public API calls here, we need to ensure that any
raised error is properly saved and restored, since API entry points
always reset messages.

Rework and simplification of teardown of the macvtap device.

Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.

In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.

* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()

A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.

* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
  number typo

This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
  QEmu driver

All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
  string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
  off 'drive-' prefix (if found) when looking up disk stats

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match

* src/qemu/qemu_conf.c: Fix ',' vs '.' typo in floppy disk arg

The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags

It was used for error reporting only.

When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.

* src/qemu/qemu_conf.c: Reserve IDE controller / video card
  slot at time of need, rather than upfront

To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
  for assigning device aliases for disks, host devices and
  controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
  all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
  Update for changed hostdev naming scheme

This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug

* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
  instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
  instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
  assignment code into the main methods