In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.

Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)

Let's use different variable to hold restore result.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.

This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

Iterate over all cpus skipping inactive ones.

The VIR_DOMAIN_STATS_VCPU flag to virDomainListGetStats
enables reporting of stats about vCPUs. Currently we
only report the cumulative CPU running time and the
execution state.

This adds reporting of the wait time - time the vCPU
wants to run, but the host scheduler has something else
running ahead of it.

The data is reported per-vCPU eg

$ virsh domstats --vcpu demo
 Domain: 'demo'
   vcpu.current=4
   vcpu.maximum=4
   vcpu.0.state=1
   vcpu.0.time=1420000000
   vcpu.0.wait=18403928
   vcpu.1.state=1
   vcpu.1.time=130000000
   vcpu.1.wait=10612111
   vcpu.2.state=1
   vcpu.2.time=110000000
   vcpu.2.wait=12759501
   vcpu.3.state=1
   vcpu.3.time=90000000
   vcpu.3.wait=21825087

In implementing this I notice our reporting of CPU execute
time has very poor granularity, since we are getting it
from /proc/$PID/stat. As a future enhancement we should
prefer to get CPU execute time from /proc/$PID/schedstat
or /proc/$PID/sched (if either exist on the running kernel)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove unnecessary condition and variable.

When acpi is used to reboot/shutdown qemu domain, qemu emits
SHUTDOWN event. Libvirt uses fakeReboot variable in order to
differentiate reboot or shutdown. fakeReboot value is reseted
to false after domain restart/reset.

When mode=agent is used to reboot qemu domain, qemu doesn't emit
SHUTDOWN event and libvirt doesn't reset fakeReboot value to false.
In this case next 'shutdown -h now' performs reboot. That's why
we don't need to set fakeReboot=true for mode=agent.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In qemu driver we listen to virtio channel events like an agent
connected to or disconnected from the guest part of socket.
However, with a little exception - when we find out that the
socket in question is the guest agent one, we connect or
disconnect guest agent which is done prior setting new state in
internal structure. Due to a bug in our code it may happen that
we got the event but failed to set it in internal structure
representing the channel.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Rather than open coding calls. I can't see any reason not to

Rather than open coding calls. I can't see any reason not to

The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When doing a memory-only snapshot libvirt would still issue the
'transaction' command without any disk. Skip it if it isn't necessary.

While reviewing 1b43885d I've noticed a virReportError()
followed by a goto endjob; without setting the correct return
value. Problem is, if block job is so fast that it's bandwidth
does not fit into ulong, an error is reported. However, by that
time @ret is already set to 1 which means success. Since the
scenario can be hardly considered successful, we should return a
value meaning error.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Valgrind complained:

==23975== Conditional jump or move depends on uninitialised value(s)
==23975==    at 0x22255FA6: qemuDomainGetBlockJobInfo (qemu_driver.c:16538)
==23975==    by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975==    by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975==    by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975==    by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975==    by 0x52F4668: virThreadHelper (virthread.c:206)
==23975==    by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975==    by 0x82BE93C: clone (in /lib64/libc-2.12.so)
==23975==
==23975== Conditional jump or move depends on uninitialised value(s)
==23975==    at 0x22255FB4: qemuDomainGetBlockJobInfo (qemu_driver.c:16542)
==23975==    by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975==    by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975==    by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975==    by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975==    by 0x52F4668: virThreadHelper (virthread.c:206)
==23975==    by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975==    by 0x82BE93C: clone (in /lib64/libc-2.12.so)

If no matching block job is found, qemuMonitorGetBlockJobInfo returns 0
and we should not write anything to the caller-supplied
virDomainBlockJobInfo pointer.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.

Advantages:

  * possible values are well-defined
  * typos in driver names will be detected at compile time
  * avoids having several copies of the same string around
  * no error checking required when setting / getting value

The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.

This function calls qemuDomainAttachControllerDevice for SCSI
controllers and reports an error for all other controllers.

Move the error inside qemuDomainAttachControllerDevice and delete this
wrapper.

A closer review of the code shows that for the transition from paused to
running which was supposed to emit the VIR_DOMAIN_EVENT_RESUMED - no event
would be generated. Rather the event is generated when going from running
to running.

Following the 'was_running' boolean shows it is set when the domain obj
is active and the domain obj state is VIR_DOMAIN_RUNNING. So rather than
using was_running to generate the RESUMED event, use !was_running

Change some of the control structures and switch to using the new vcpu
structure.

Instead of directly accessing the array add a helper to do this.

Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.

We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d82
and 65686e5a this was removed.

The vCPU threads make sense in the counterparts that set the vCPU
bandwidth/quota, not in the emulator one. The emulator tunables are set
all the time anyways.

Drop the extra check and remove the now unneeded vm argument.

Refactor the code flow so that 'exit_monitor:' can be removed.

This patch moves the auditing functions into places where it's certain
that hotunplug was or was not successful and reports errors from
qemuMonitorGetCPUInfo properly.

Refactor the code flow so that 'exit_monitor:' can be removed.

This patch also moves the auditing and setting of the new vCPU count
right to the place where the hotplug happens, since it's possible that
the hotplug succeeds and adds a cpu while other stuff fails.

Lastly, failures of qemuMonitorGetCPUInfo are now reported rather than
ignored. The function retuns 0 if it "successfully" detected 0 threads.

qemuDomainHotplugVcpus/qemuDomainHotunplugVcpus are complex enough in
regards of adding one CPU. Additionally it will be desired to reuse
those functions later with specific vCPU hotplug.

Move the loops for adding vCPUs into qemuDomainSetVcpusFlags so that the
helpers can be made simpler and more straightforward.

Let the function report errors internally and change it to return
standard return codes.

The cpu hotplug helper functions used negative error handling in a part
of them, although some code that was added later didn't properly set the
error codes in some cases. This would cause improper error messages in
cases where we couldn't modify the numa cpu mask and a few other cases.

Fix the logic by converting it to the regularly used pattern.

There's only very little common code among the two operations. Split the
functions so that the internals are easier to understand and refactor
later.

With a very unfortunate timing, the agent might vanish before we do the
second call while the locks were down. Re-check that the agent is
available before attempting it again.

Separate the code so that qemuDomainSetVcpusFlags contains only code
relevant to hardware hotplug/unplug.

Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.

The code can be unified into the new accessor rather than being
scattered accross the drivers.

To support further refactors replace all write access to def->maxvcpus
with a accessor function.

The qemuDomainTaint APIs currently expect to be passed a log file
descriptor. Change them to instead use a qemuDomainLogContextPtr
to hide the implementation details.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The rename operation only works on inactive virtual machines,
but it none the less writes to the log file used by the QEMU
processes. This log file is not intended to provide a general
purpose audit trail of operations performed on VMs. The audit
subsystem has recording of important operations. If we want
to extend that to cover all significant public APIs that is
a valid thing to consider, but we shouldn't arbitrarily log
specific APIs into the QEMU log file in the meantime.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We only started an async job for incoming migration from another host.
When we were starting a domain from scratch or restoring from a saved
state (migration from file) we didn't set any async job. Let's introduce
a new QEMU_ASYNC_JOB_START for these cases.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1270715

Commit id '9deb96f9' removed the code to fetch the nodeset from the
CpusetMems cgroup for a running vm in favor of using the return from
virDomainNumatuneFormatNodeset introduced by commit id '43b67f2e'.
However, that API will return the value of the passed 'auto_nodeset'
when placement is VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO, which happens
to be NULL.

Since commit id 'c74d58ad' started using priv->autoNodeset in order
to manage the auto placement value during qemuProcessStart, it should
be passed along in order to return the correct value if the domain
requests the auto placement.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Although theoretically both should be the same value, the niothreadids
should be used in favor of iothreads when performing comparisons. This
leaves the iothreads as a purely numeric value to be saved in the config
file.  The one exception to the rule is virDomainIOThreadIDDefArrayInit
where the iothreadids are being generated from the iothreads count since
iothreadids were added after initial iothreads support.