virNetworkObjUpdate takes care of all virNetworkUpdate-related changes
to the data stored in the in-memory virNetworkObj list. It should be
called by network drivers that use this in-memory list.

virNetworkObjUpdate *does not* take care of updating any disk-based
copies of the config, nor does it perform any other operations
necessary to have the new config data take effect (e.g. it won't
re-write dnsmasq host files, nor will it send a SIGHUP to dnsmasq) -
those things should all be taken care of in the network driver
function that calls virNetworkObjUpdate (assuming that it returns
success).

These new functions are highly inspired by those in domain_conf.c (but
not identical), and are intended to make it simpler to update the
various combinations of live/persistent network configs.

The network driver wasn't previously as careful about the separation
between the live "status" in network->def and the persistent "config"
in network->newDef (or sometimes in network->def). This series
attempts to remedy some of that, but probably doesn't go all the way
(enough to get these functions working and enable continued work on
virNetworkUpdate though).

bridge_driver.c and test_driver.c were updated in a few places to take
advantage of the new functions and/or account for changes in argument
lists.

This is very short, because almost everything is autogenerated. All
that's needed are:

* src/remote/remote_driver.c: add pointer to autogenerated
    remoteNetworkUpdate to the function table for the remote
    network driver.

* src/remote/remote_protocol.x: add the "args" struct and add one more
    item to the remote_procedure enum for this function.

* src/remote_protocol-struct: update to match remote_protocol.x

This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.

This series adds support to run QEMU with seccomp sandbox enabled. It can be
configured in qemu.conf to on, off, or the QEMU default, which is off in 1.2.
Default value is the QEMU default.

On agent EOF the qemuProcessHandleAgentEOF() callback is called
which locks virDomainObjPtr. Then qemuAgentClose() is called
(with domain object locked) which eventually calls qemuAgentDispose()
and qemuProcessHandleAgentDestroy(). This tries to lock the
domain object again. Hence the deadlock.

All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).

* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.

* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.

This assumes ide-drive.wwn, ide-hd.wwn, ide-cd.wwn were supported
at the same time, similar for scsi-disk.wwn, scsi-hd.wwn, and
scsi-cd.wwn. So only two new caps (QEMU_CAPS_IDE_DRIVE_WWN,
and QEMU_CAPS_SCSI_DISK_WWN) are introduced.

Validates the wwn while parsing, error out if it's malformed.

* src/util/util.h: Declare virValidateWWN
* src/util/util.c: Implement virValidateWWN
* src/libvirt_private.syms: Export virValidateWWN.
* src/conf/domain_conf.h: New member 'wwn' for disk def.
* src/conf/domain_conf.c: Parse and format disk <wwn>

Relatively straightforward.  Our decision to make block job
speed a long keeps haunting us on new API.

* src/remote/remote_protocol.x (remote_domain_block_commit_args):
New struct.
* src/remote/remote_driver.c (remote_driver): Enable it.
* src/remote_protocol-structs: Regenerate.
* src/rpc/gendispatch.pl (long_legacy): Exempt another bandwidth.

A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation.  Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.

This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html

Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase).  However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.

For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active

+ These are equivalent:
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
 virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.

+ These are equivalent:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.

+ Similarly:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.

+ This version:
 virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'

* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.

Upstream qemu has raised a concern about whether dumping guest
memory by reading guest paging tables is a security hole:
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02607.html

While auditing libvirt to see if we would be impacted, I noticed
that we had some dead code.  It is simpler to nuke the dead code
and limit our monitor code to just the subset we make use of.

* src/qemu/qemu_monitor.h (QEMU_MONITOR_DUMP): Drop poorly named
and mostly-unused enum.
* src/qemu/qemu_monitor.c (qemuMonitorDumpToFd): Drop arguments.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_driver.c (qemuDumpToFd): Update caller.

virNetworkAssignDef was allocating a new network object, initing and
grabbing its lock, then potentially freeing it without unlocking or
destroying the lock. In practice 1) this will probably never happen,
and 2) even if it did, the lock implementation used on most (all?)
platforms doesn't actually hold any resources for an initialized or
held lock, but it still bothered me, so I moved the realloc that could
lead to this bad situation earlier in the function, and now the mutex
isn't inited or locked until we are assured of complete success.

These two objects were previously always parsed as a part of an IpDef,
but we will now need to be able to parse them on their own for
virNetworkUpdate(). Split the parsing functions out, with no
functional changes.

virBitmap is recommanded to store cpuset info, and
virBitmapFormat/virBitmapParse can do the format/parse
jobs.

The final patch in Hu Tao's series to enhance virBitmap actually
removes virDomainCpuSetParse and virDomainCpuSetFormat as "no longer
used", and the rest of the series hadn't taken care of two uses of
virDomainCpuSetParse in the xen code.

This patch replaces those with appropriate virBitmap functions. It
should be pushed prior to the patch removing virDomainCpuSetParse.

In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.

Add a new member variable map_len to store map len of bitmap.
and rename size to max_bit accordingly.

rename virBitmapAlloc to virBitmapNew.

Pushed under build-breaker rules.

Including QEMU, LXC, UML, XEN drivers.

Only implemented for linux platform.

* src/nodeinfo.h: (Declare node{Get,Set}MemoryParameters)
* src/nodeinfo.c: (Implement node{Get,Set}MemoryParameters)
* src/libvirt_private.syms: (Export those two new internal APIs to
  private symbols)

* src/rpc/gendispatch.pl: (virNodeSetMemoryParameters is the
  the special one which needs a connection object as the first
  argument, improve the generator to support it).
* daemon/remote.c: (Implement the server side handler for
  virDomainGetMemoryParameters)
* src/remote/remote_driver.c: (Implement the client side handler
  for virDomainGetMemoryParameters)
* src/remote/remote_protocol.x: (New RPC procedures for the two
  new APIs and structs to represent the args and ret for it)
* src/remote_protocol-structs: Likewise

* include/libvirt/libvirt.h.in: (Add macros for the param fields,
  declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)

Simply returns the object list. Supports to filter the secrets
by its storage location, and whether it's private or not.

src/secret/secret_driver.c: Implement listAllSecrets

The RPC generator doesn't support returning list of object yet, this patch
does the work manually.

  * daemon/remote.c:
    Implement the server side handler remoteDispatchConnectListAllSecrets.

  * src/remote/remote_driver.c:
    Add remote driver handler remoteConnectListAllSecrets.

  * src/remote/remote_protocol.x:
    New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_SECRETS and
    structs to represent the args and ret for it.

  * src/remote_protocol-structs: Likewise.

This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
                              and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public

Simply returns the object list. No filtering.

src/nwfilter/nwfilter_driver.c: Implement listAllNWFilters

The RPC generator doesn't support returning list of object yet, this patch
do the work manually.

  * daemon/remote.c:
    Implemente the server side handler remoteDispatchConnectListAllNWFilters.

  * src/remote/remote_driver.c:
    Add remote driver handler remoteConnectListAllNWFilters.

  * src/remote/remote_protocol.x:
    New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NWFILTERS and
    structs to represent the args and ret for it.

  * src/remote_protocol-structs: Likewise.

This is to list the network filter objects. No flags are supported

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
                              and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public

tools/virsh-nodedev.c:
  * vshNodeDeviceSorter to sort node devices by name

  * vshNodeDeviceListFree to free the node device objects list.

  * vshNodeDeviceListCollect to collect the node device objects, trying
    to use new API first, fall back to older APIs if it's not supported.

  * Change option --cap to accept multiple capability types.

tools/virsh.pod
  * Update document for --cap

This simply implements listAllNodeDevices using helper virNodeDeviceList

src/node_device/node_device_driver.h:
  * Declare nodeListAllNodeDevices.

src/node_device/node_device_driver.c:
  * Implement nodeListAllNodeDevices.

src/node_device/node_device_hal.c:
  * Hook listAllNodeDevices to nodeListAllNodeDevices.

src/node_device/node_device_udev.c
  * Hook listAllNodeDevices to nodeListAllNodeDevices.