- 08 6月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
Add a new iotlb attribute to the iommu device to control the device IOTLB support for intel-iommu. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 07 6月, 2017 1 次提交
-
-
由 Jiri Denemark 提交于
The following patches will add an actual content in the cookie and use the data when restoring a domain. Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 05 6月, 2017 1 次提交
-
-
由 Eli Qiao 提交于
Add cache resource control into capabilities for CAT without CDP: <cache> <bank id='0' level='3' type='unified' size='15360' unit='KiB' cpus='0-5'> <control min='768' unit='KiB' scope='both' max_allocation='4'/> </bank> </cache> and with CDP: <cache> <bank id='0' level='3' type='unified' size='15360' unit='KiB' cpus='0-5'> <control min='768' unit='KiB' scope='code' max_allocation='4'/> <control min='768' unit='KiB' scope='data' max_allocation='4'/> </bank> </cache> Also add new test cases for vircaps2xmltest. Signed-off-by: NEli Qiao <liyong.qiao@intel.com>
-
- 26 5月, 2017 3 次提交
-
-
由 Bjoern Walk 提交于
Similar to scsi_host and fc_host, there is a relation between a scsi_target and its transport specific fc_remote_port. Let's expose this relation and relevant information behind it. An example for a virsh nodedev-dumpxml: virsh # nodedev-dumpxml scsi_target0_0_0 <device> <name>scsi_target0_0_0</name> <path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path> <parent>scsi_host0</parent> <capability type='scsi_target'> <target>target0:0:0</target> <capability type='fc_remote_port'> <rport>rport-0:0-0</rport> <wwpn>0x9d73bc45f0e21a86</wwpn> </capability> </capability> </device> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
由 Bjoern Walk 提交于
Make CCW devices available to the node_device driver. The devices are already seen by udev so let's implement necessary code for detecting them properly. Topologically, CCW devices are similar to PCI devices, e.g.: +- ccw_0_0_1a2b | +- scsi_host0 | +- scsi_target0_0_0 | +- scsi_0_0_0_0 Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
由 Ján Tomko 提交于
Add an attribute to control extended interrupt mode. https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 18 5月, 2017 2 次提交
-
-
由 Erik Skultety 提交于
Start discovering the mediated devices on the host system and format the attributes for the mediated device into the XML. Compared to the parent device which reports generic information about the abstract mediated devices types, a child device only reports the type name it has been instantiated from and the IOMMU group number, since that's device specific compared to the rest of the info that can be gathered about mediated devices at the moment. This patch introduces both the formatting and parsing routines, updates nodedev.rng schema, adding a testcase as well. The resulting mdev child device XML: <device> <name>mdev_4b20d080_1b54_4048_85b3_a6a62d165c01</name> <path>/sys/devices/.../4b20d080-1b54-4048-85b3-a6a62d165c01</path> <parent>pci_0000_06_00_0</parent> <driver> <name>vfio_mdev</name> </driver> <capability type='mdev'> <type id='vendor_supplied_type_id'/> <iommuGroup number='NUM'/> <capability/> <device/> https://bugzilla.redhat.com/show_bug.cgi?id=1452072Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
The parent device needs to report the generic stuff about the supported mediated devices types, like device API, available instances, type name, etc. Therefore this patch introduces a new nested capability element of type 'mdev_types' with the resulting XML of the following format: <device> ... <capability type='pci'> ... <capability type='mdev_types'> <type id='vendor_supplied_id'> <name>optional_vendor_supplied_codename</name> <deviceAPI>vfio-pci</deviceAPI> <availableInstances>NUM</availableInstances> </type> ... <type> ... </type> </capability> </capability> ... </device> https://bugzilla.redhat.com/show_bug.cgi?id=1452072Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 15 5月, 2017 3 次提交
-
-
由 Ján Tomko 提交于
Add a new attribute to control the caching mode. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new attribute to control interrupt remapping. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new <ioapic> element with a driver attribute. Possible values are qemu and kvm. With 'qemu', the I/O APIC can be put in the userspace even for KVM domains. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
- 09 5月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
We're only adding only info about L3 caches, we can add more later (just by changing one line), but for now that's more than enough without overwhelming anyone. XML snippet of how this should look like (also seen as part of the commit): <cache> <bank id='0' level='3' type='both' size='8192' unit='KiB' cpus='0-7'/> </cache> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 28 4月, 2017 9 次提交
-
-
由 Pavel Hrdina 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Acked-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Peter Krempa 提交于
NBD does not mandate a "filename". Gluster can have more servers. Split them so that we can tighten the schema.
-
由 Peter Krempa 提交于
ftp/tftp/sheepdog have a mandatory filename and support only one host. There are no additional options for them.
-
由 Peter Krempa 提交于
Make the schema more strict for HTTP disks requiring a name and mandating exactly one source host. ftp/tftp entries were not moved here, since http transport also will support cookies and other options, which will be added later.
-
由 Peter Krempa 提交于
RBD driver supports specifying a snapshot image name or config file. Create a define for RBD and move the specifics there.
-
由 Peter Krempa 提交于
Move it to the place where actually interleaving elements can be placed.
-
由 Peter Krempa 提交于
'diskSourceNetwork' schema define was rather big and it would be hard to simplify it. Split out the host portion subelement into a separate define.
-
由 Peter Krempa 提交于
They don't contain any elements to interleave.
-
由 Jiri Denemark 提交于
This patch introduces <cache level='N' mode='emulate'/> <cache mode='passthrough'/> <cache mode='disable'/> sub element of /domain/cpu. Currently only a single <cache> element is allowed. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
We are currently parsing only rx/frames/max because that's the only value that makes sense for us. The tun device just added support for this one and the others are only supported by hardware devices which we don't need to worry about as the only way we'd pass those to the domain is using <hostdev/> or <interface type='hostdev'/>. And in those cases the guest can modify the settings itself. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 05 4月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
docs/schemas directory is meant for schemas which are installed on the system. The schema for the news file does not need to be installed. Store it along with the file it describes for simplicity.
-
- 04 4月, 2017 1 次提交
-
- 03 4月, 2017 2 次提交
-
-
由 Andrea Bolognani 提交于
Creating dummy <change> elements was a workaround for the HTML DTD not allowing empty <ul> elements, but we can do better by tweaking the the XSLT stylesheet.
-
由 Peter Krempa 提交于
Since this file gets changed (and broken) rather often, introduce a schema file so that the test suite can validate it.
-
- 29 3月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set allow omitting the <name> element and instead fill out the pool name from the <source><name> element. Relax the schema to make <name> optional for these pools. Expressing that at least one of these is required is out of scope of the schema.
-
- 27 3月, 2017 2 次提交
-
-
由 Laine Stump 提交于
This brings the libvirt version of this RNG file in line with the same file in netcf (as soon as the corresponding patch there is ACKed and pushed). There's no reason to require it when defining an interface (the config option it corresponds to is optional), and it isn't even output in the status of an interface. Resolves: https://bugzilla.redhat.com/1414404
-
由 Erik Skultety 提交于
A mediated device will be identified by a UUID (with 'model' now being a mandatory <hostdev> attribute to represent the mediated device API) of the user pre-created mediated device. We also need to make sure that if user explicitly provides a guest address for a mdev device, the address type will be matching the device API supported on that specific mediated device and error out with an incorrect XML message. The resulting device XML: <devices> <hostdev mode='subsystem' type='mdev' model='vfio-pci'> <source> <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'> </source> </hostdev> </devices> Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 26 3月, 2017 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Commit df769041 made the 'machine' element in domaincaps optional. Update the schema to reflect that.
-
- 17 3月, 2017 2 次提交
-
-
由 Jiri Denemark 提交于
The attribute can be used to request a specific way of checking whether the virtual CPU matches created by the hypervisor matches the specification in domain XML. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Andrea Bolognani 提交于
QEMU 2.9 introduces the pcie-root-port device, which is a generic version of the existing ioh3420 device. Make the new device available to libvirt users.
-
- 15 3月, 2017 3 次提交
-
-
由 Michal Privoznik 提交于
For NVDIMM devices it is optionally possible to specify the size of internal storage for namespaces. Namespaces are a feature that allows users to partition the NVDIMM for different uses. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Now that NVDIMM has found its way into libvirt, users might want to fine tune some settings for each module separately. One such setting is 'share=on|off' for the memory-backend-file object. This setting - just like its name suggest already - enables sharing the nvdimm module with other applications. Under the hood it controls whether qemu mmaps() the file as MAP_PRIVATE or MAP_SHARED. Yet again, we have such config knob in domain XML, but it's just an attribute to numa <cell/>. This does not give fine enough tuning on per-memdevice basis so we need to have the attribute for each device too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
NVDIMM is new type of memory introduced into QEMU 2.6. The idea is that we have a Non-Volatile memory module that keeps the data persistent across domain reboots. At the domain XML level, we already have some representation of 'dimm' modules. Long story short, NVDIMM will utilize the existing <memory/> element that lives under <devices/> by adding a new attribute 'nvdimm' to the existing @model and introduce a new <path/> element for <source/> while reusing other fields. The resulting XML would appear as: <memory model='nvdimm'> <source> <path>/tmp/nvdimm</path> </source> <target> <size unit='KiB'>523264</size> <node>0</node> </target> <address type='dimm' slot='0'/> </memory> So far, this is just a XML parser/formatter extension. QEMU driver implementation is in the next commit. For more info on NVDIMM visit the following web page: http://pmem.io/Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 12 3月, 2017 1 次提交
-
-
由 Fabian Freyer 提交于
bhyve supports 'gop' video device that allows clients to connect to VMs using VNC clients. This commit adds support for that to the bhyve driver: - Introducr 'gop' video device type - Add capabilities probing for the 'fbuf' device that's responsible for graphics - Update command builder routines to let users configure domain's VNC via gop graphics. Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
-
- 08 3月, 2017 4 次提交
-
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the emulation_faults perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the alignment_faults perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the page_faults_maj perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the page_faults_min perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-