- 25 7月, 2011 12 次提交
-
-
由 Eric Blake 提交于
* tests/virnettlscontexttest.c (testTLSLoadKey): Report errors.
-
由 Wieland Hoffmann 提交于
-
由 Michal Privoznik 提交于
-
由 Michal Privoznik 提交于
-
由 Michal Privoznik 提交于
These function executes 'tc' with appropriate arguments to set desired QoS setting on interface or bridge during its creation.
-
由 Michal Privoznik 提交于
-
由 Michal Privoznik 提交于
These functions parse given XML node and return pointer to the output. Unknown elements are silently ignored. Attributes must be integer and must fit in unsigned long long. Free function frees elements of virBandwidth structure.
-
由 Michal Privoznik 提交于
-
由 Michal Privoznik 提交于
Define new 'bandwidth' element with possible child element 'inbound' and 'outbound' addressing incoming and outgoing traffic respectively: <bandwidth> <inbound average='1000' peak='2000' burst='5120'/> <outbound average='500'/> </bandwidth> Leaving any element out means not to shape traffic in that direction. The units for average and peak (rate) are in kilobytes per second, for burst (size) are just in kilobytes. This element can be inserted into domain's 'interface' and 'network'.
-
由 Laine Stump 提交于
The new listenNetwork attribute needs to learn an IP address based on a named network. This patch provides a function networkGetNetworkAddress which provides that. Some networks have an IP address explicitly in their configuration (ie, those with a forward type of "none", "route", or "nat"). For those, we can just return the IP address from the config. The rest will have a physical device associated with them (either via <bridge name='...'/>, <forward ... dev='...'/>, or possibly via a pool of interfaces inside the network's <forward> element) and we will need to ask the kernel for a current IP address of that device (via the newly added ifaceGetIPAddress) If networkGetNetworkAddress encounters an error while trying to learn the address for a network, it will return -1. In the case that libvirt has been compiled without the network driver, the call is a macro which reduces to -2. This allows differentiating between a failure of the network driver, and its complete absence.
-
由 Laine Stump 提交于
This function uses ioctl(SIOCGIFADDR), which limits it to returning the first IPv4 address of an interface, but that's what we want right now (the place we're going to use the address only accepts one).
-
由 Eric Blake 提交于
Even though gnutls is a hard-req for libvirt, and gnutls depends on libtasn1, that does not mean that you have to have the libtasn1 development files installed. Skip the test rather than failing compilation in that case. With newer gcc, the test consumed too much stack space. Move things to static storage to fix that. * configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h. (HAVE_LIBTASN1): New automake conditional. * tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES) (virnettlscontexttest_LDADD): Allow compilation without libtasn1. * tests/virnettlscontexttest.c: Skip test if headers not present. (struct testTLSCertReq): Alter time members. (testTLSGenerateCert): Reflect the change. (mymain): Reduce stack usage.
-
- 22 7月, 2011 28 次提交
-
-
由 Daniel P. Berrange 提交于
The sanlock plugin for libvirt expects the directory /var/lib/libvirt/sanlock to exist. Create this and add it to the RPM * libvirt.spec.in: Add /var/lib/libvirt/sanlock * src/Makefile.am: Create /var/lib/libvirt/sanlock
-
由 Daniel P. Berrange 提交于
A container should not be allowed to modify stuff in /sys or /proc/sys so make them readonly. Make /selinux readonly so that containers think that selinux is disabled. Honour the readonly flag when mounting container filesystems from the guest XML config * src/lxc/lxc_container.c: Support readonly mounts
-
由 Daniel P. Berrange 提交于
Even in non-virtual root filesystem mode we should be mounting more than just a new /proc. Refactor lxcContainerMountBasicFS so that it does everything except for /dev and /dev/pts moving that into lxcContainerMountDevFS. Pass in a source prefix to lxcContainerMountBasicFS() so it can be used in both shared root and private root modes. * src/lxc/lxc_container.c: Unify mounting code for special filesystems
-
由 Daniel P. Berrange 提交于
The bind mount setup is about to get more complicated. To avoid having to deal with several copies, pull it out into a separate lxcContainerMountFSBind method. Also pull out the iteration over container filesystems, so that it will be easier to drop in support for non-bind mount filesystems * src/lxc/lxc_container.c: Pull bind mount code out into lxcContainerMountFSBind
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
This test case checks certification validation rules for - Basic constraints - Key purpose - Key usage - Start/expiry times It checks initial context creation sanity checks, and live session validation
-
由 Daniel P. Berrange 提交于
When libvirtd starts it it will sanity check its own certs, and before libvirt clients connect to a remote server they will sanity check their own certs. This patch allows such sanity checking to be skipped. There is no strong reason to need to do this, other than to bypass possible libvirt bugs in sanity checking, or for testing purposes. libvirt.conf gains tls_no_sanity_certificate parameter to go along with tls_no_verify_certificate. The remote driver client URIs gain a no_sanity URI parameter * daemon/test_libvirtd.aug, daemon/libvirtd.conf, daemon/libvirtd.c, daemon/libvirtd.aug: Add parameter to allow cert sanity checks to be skipped * src/remote/remote_driver.c: Add no_sanity parameter to skip cert checks * src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Add new parameter for skipping sanity checks independantly of skipping session cert validation checks
-
由 Matthias Bolte 提交于
Also prepend $(AM_V_GEN) to the command line, mark virkeycode-mapgen.py as executable and switch the shebang line from /bin/python to the commonly use /usr/bin/python.
-
由 Matthias Bolte 提交于
xen_session_logout already frees the whole session object. Don't call xenSessionFree on a freed session object. Reported by Sharmila Radhakrishnan.
-
由 Oskari Saarenmaa 提交于
New optional parameter "keyfile" for ssh transport allows the user to select the private key to be used to authenticate to the remote host.
-
由 Laine Stump 提交于
All of the functions in util/interface.c were returning 0 on success, but some returned -1 on error, and some returned a positive value (usually the value of errno, but sometimes just 1). Libvirt's standard is to return < 0 on error (in the case of functions that need to return errno, -errno is returned. This patch modifies all functions in interface.c to consistently return < 0 on error, and makes changes to callers of those functions where necessary.
-
由 Daniel P. Berrange 提交于
There is some commonality between the code for sanity checking certs when initializing libvirt and the code for validating certs during a live TLS session handshake. This patchset splits up the sanity checking function into several smaller functions each doing a specific type of check. The cert validation code is then updated to also call into these functions * src/rpc/virnettlscontext.c: Refactor cert validation code
-
由 Daniel P. Berrange 提交于
The gnutls_certificate_type_set_priority method is deprecated. Since we already set the default gnutls priority, it was not serving any useful purpose and can be removed * src/rpc/virnettlscontext.c: Remove gnutls_certificate_type_set_priority call
-
由 Daniel P. Berrange 提交于
If the virStateInitialize call fails we must shutdown libvirtd since drivers will not be available. Just free'ing the virNetServer is not sufficient, we must send a SIGTERM to ourselves so that we interrupt the event loop and trigger a orderly shutdown * daemon/libvirtd.c: Kill ourselves if state init fails * src/rpc/virnetserver.c: Add some debugging to event loop
-
由 Adam Litke 提交于
When an operation started by virDomainBlockPull completes (either with success or with failure), raise an event to indicate the final status. This API allow users to avoid polling on virDomainGetBlockJobInfo if they would prefer to use an event mechanism. * daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/remote_protocol-structs: structure definitions for protocol verification * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor
-
由 Adam Litke 提交于
virDomainGetBlockJobInfo requires manual override since it returns a custom type. * python/generator.py: reenable bindings for this entry point * python/libvirt-override-api.xml python/libvirt-override.c: manual overrides
-
由 Adam Litke 提交于
Define two new virsh commands: * blockpull: Initiate a blockPull for the given disk * blockjob: Retrieve progress info, modify speed, and cancel active block jobs Share print_job_progress() with the migration code. * tools/virsh.c: implement the new commands
-
由 Adam Litke 提交于
The virDomainBlockPull* family of commands are enabled by the following HMP/QMP commands: 'block_stream', 'block_job_cancel', 'info block-jobs' / 'query-block-jobs', and 'block_job_set_speed'. * src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk streaming by using the proper qemu monitor commands. * src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
-
由 Adam Litke 提交于
The generator can handle everything except virDomainGetBlockJobInfo(). * src/remote/remote_protocol.x: provide defines for the new entry points * src/remote/remote_driver.c daemon/remote.c: implement the client and server side for virDomainGetBlockJobInfo. * src/remote_protocol-structs: structure definitions for protocol verification * src/rpc/gendispatch.pl: Permit some unsigned long parameters
-
由 Adam Litke 提交于
* src/libvirt.c: implement the main entry points
-
由 Adam Litke 提交于
Set up the types for the block pull functions and insert them into the virDriver structure definition. Symbols are exported in this patch to prevent documentation compile failures. * include/libvirt/libvirt.h.in: new API * src/driver.h: add the new entry to the driver structure * python/generator.py: fix compiler errors, the actual python bindings * are implemented later * src/libvirt_public.syms: export symbols * docs/apibuild.py: Extend 'unsigned long' parameter exception to this * API
-
由 Eric Blake 提交于
Now you can edit a saved state file even if you forgot to grab a dumpxml file prior to saving a domain. Plus, in-place editing feels so much nicer. * tools/virsh.c (cmdSaveImageDumpxml, cmdSaveImageDefine) (cmdSaveImageEdit): New commands. * tools/virsh.pod (save-image-dumpxml, save-image-define) (save-image-edit): Document them.
-
由 Eric Blake 提交于
* src/remote/remote_driver.c (remote_driver): Add new callbacks. * src/remote/remote_protocol.x (remote_procedure): New RPCs. (remote_domain_save_image_get_xml_desc_args) (remote_domain_save_image_get_xml_desc_ret) (remote_domain_save_image_define_xml_args): New structs. * src/remote_protocol-structs: Update.
-
由 Eric Blake 提交于
Modifying the xml on either save or restore only gets you so far - you have to remember to 'virsh dumpxml dom' just prior to the 'virsh save' in order to have an xml file worth modifying that won't be rejected due to abi breaks. To make this more powerful, we need a way to grab the xml embedded within a state file, and from there, it's not much harder to also support modifying a state file in-place. Also, virDomainGetXMLDesc didn't document its flags. * include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc) (virDomainSaveImageDefineXML): New prototypes. * src/libvirt.c (virDomainSaveImageGetXMLDesc) (virDomainSaveImageDefineXML): New API. * src/libvirt_public.syms: Export them. * src/driver.h (virDrvDomainSaveImageGetXMLDesc) (virDrvDomainSaveImgeDefineXML): New driver callbacks.
-
由 Eric Blake 提交于
libvirt-guests is a perfect use case for bypassing the file system cache - lots of filesystem traffic done at system shutdown, where caching is pointless, and startup, where reading large files only once just gets in the way. Make this a configurable option in the init script, but defaulting to existing behavior. * tools/libvirt-guests.sysconf (BYPASS_CACHE): New variable. * tools/libvirt-guests.init.sh (start, suspend_guest): Use it.
-
由 Eric Blake 提交于
When auto-dumping a domain on crash events, or autostarting a domain with managed save state, let the user configure whether to imply the bypass cache flag. * src/qemu/qemu.conf (auto_dump_bypass_cache, auto_start_bypass_cache): Document new variables. * src/qemu/libvirtd_qemu.aug (vnc_entry): Let augeas parse them. * src/qemu/qemu_conf.h (qemud_driver): Store new preferences. * src/qemu/qemu_conf.c (qemudLoadDriverConfig): Parse them. * src/qemu/qemu_driver.c (processWatchdogEvent, qemuAutostartDomain): Honor them.
-
由 Eric Blake 提交于
Wire together the previous patches to support file system cache bypass during API save/restore requests in qemu. * src/qemu/qemu_driver.c (qemuDomainSaveInternal, doCoreDump) (qemudDomainObjStart, qemuDomainSaveImageOpen, qemuDomainObjRestore) (qemuDomainObjStart): Add parameter. (qemuDomainSaveFlags, qemuDomainManagedSave, qemudDomainCoreDump) (processWatchdogEvent, qemudDomainStartWithFlags, qemuAutostartDomain) (qemuDomainRestoreFlags): Update callers.
-
由 Eric Blake 提交于
O_DIRECT has stringent requirements. Rather than make lots of changes at each site that wants to use O_DIRECT, it is easier to offload the work through a helper process that mirrors the I/O between a pipe and the actual direct fd, so that the other end of the pipe no longer has to worry about constraints. Plus, if the kernel ever gains better posix_fadvise support, then we only have to touch a single file to let all callers benefit from a more efficient way to avoid file system caching. * src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew) (virFileDirectFdClose, virFileDirectFdFree): New prototypes. * src/util/virdirect.c: Implement new wrapper object. * src/libvirt_private.syms (virfile.h): Export new symbols. * cfg.mk (useless_free_options): Add to list. * po/POTFILES.in: Add new translations.
-