- 15 9月, 2016 7 次提交
-
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomáš Ryšavý 提交于
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomáš Ryšavý 提交于
In testOpenDefault we create a virtual computer that is later presented to user. We also pretend to have NUMA cells and initialize them somehow. But whilst doing so a magical constant is used. Drop it. Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 09 9月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
The code for replacing domain's transient definition with the persistent one is repeated in several places and we'll need to add one more. Let's make a nice helper for it. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 29 8月, 2016 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Test 12 from objecteventtest (createXML add event) segaults on FreeBSD with bus error. At some point it calls testNodeDeviceDestroy() from the test driver. And it fails when it tries to unlock the device in the "out:" label of this function. Unlocking fails because the previous step was a call to virNodeDeviceObjRemove from conf/node_device_conf.c. This function removes the given device from the device list and cleans up the object, including destroying of its mutex. However, it does not nullify the pointer that was given to it. As a result, we end up in testNodeDeviceDestroy() here: out: if (obj) virNodeDeviceObjUnlock(obj); And instead of skipping this, we try to do Unlock and fail because of malformed mutex. Change virNodeDeviceObjRemove to use double pointer and set pointer to NULL.
-
- 02 8月, 2016 1 次提交
-
-
由 Jovanka Gulicoska 提交于
Also includes unittests for node device lifecycle events API
-
- 18 7月, 2016 4 次提交
-
-
test:///default由 Cole Robinson 提交于
A nodedev device definition like this is required for testing NodeDeviceCreateXML and NodeDeviceDestroy. So unless it's part of the stock test:///default set there's no way to actually invoke those functions for the default URI
-
test:///default由 Cole Robinson 提交于
Convert the individual XML documents into one big XML document in the format expected by the non-default test://$PATH URI, and use the same internal helpers for assembling the driver contents.
-
由 Cole Robinson 提交于
Upcoming patches need this defined later
-
由 Cole Robinson 提交于
-
- 11 7月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Allow to store driver specific data on a per-vcpu basis. Move of the virDomainDef*Vcpus* functions was necessary as virDomainXMLOptionPtr was declared below this block and I didn't want to split the function headers.
-
由 Peter Krempa 提交于
-
- 07 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Few arguments of the function are not necessary any more which leads to some cleanups. The 'uri' argument had a stray ATTRIBUTE_UNUSED.
-
- 25 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not reflect any change in the lifecycle of the storage pool. It should thus not be part of the storage pool lifecycle event set, but rather be a top level event in its own right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH to replace it. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 17 6月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
-
由 Jovanka Gulicoska 提交于
Also includes unittests for storage pool lifecycle events API
-
- 08 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virConnectOpenInternal method opens the libvirt client config file and uses it to resolve things like URI aliases. There may be driver specific things that are useful to store in the config file too, so rather than have them re-parse the same file, pass the virConfPtr down to the drivers. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 6月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Make it obvious that the flag is controlling RNG schema validation.
-
- 06 6月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
Remove the live attribute and mark the definition as transient whether the domain is runing or not. There were only two callers left calling with live=false: * testDomainStartState, where the domain already is active because we assigned vm->def->id just a few lines above the call * virDomainObjGetPersistentDef, which now only calls virDomainObjSetDefTransient for an active domain
-
- 09 3月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
The implementation of the inner guts of the function is similar for all drivers, so we can add a helper and not have to reimplement it three times.
-
- 17 2月, 2016 1 次提交
-
-
由 Erik Skultety 提交于
Our existing virHashForEach method iterates through all items disregarding the fact, that some of the iterators might have actually failed. Errors are usually dispatched through an error element in opaque data which then causes the original caller of virHashForEach to return -1. In that case, virHashForEach could return as soon as one of the iterators fail. This patch changes the iterator return type and adjusts all of its instances accordingly, so the actual refactor of virHashForEach method can be dealt with later. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 08 2月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Now with the new struct the data can be stored in a much saner place.
-
由 Peter Krempa 提交于
This step can be omitted, so that drivers can decide what to do when the user requests to use default vcpu pinning.
-
- 05 2月, 2016 1 次提交
-
-
由 Joao Martins 提交于
The virDomainSnapshotDefFormat calls into virDomainDefFormat, so should be providing a non-NULL virCapsPtr instance. On the qemu driver we change qemuDomainSnapshotWriteMetadata to also include caps since it calls virDomainSnapshotDefFormat. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 04 2月, 2016 1 次提交
-
-
由 Joao Martins 提交于
And use the newly added caps->host.netprefix (if it exists) for interface names that match the autogenerated target names. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 26 1月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Report error: invalid argument: requested vcpu '100' is not present in the domain instead of error: invalid argument: requested vcpu is higher than allocated vcpus
-
- 09 12月, 2015 5 次提交
-
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and reusing it accross libvirt.
-
由 Peter Krempa 提交于
The code can be unified into the new accessor rather than being scattered accross the drivers.
-
由 Peter Krempa 提交于
To support further refactors replace all write access to def->maxvcpus with a accessor function.
-
- 30 11月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
Our domain_conf.* files are big enough. Not only they contain XML parsing code, but they served as a storage of all functions whose name is virDomain prefixed. This is just wrong as it gathers not related functions (and modules) into one big file which is then harder to maintain. Split virDomainObjList module into a separate file called virdomainobjlist.[ch]. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 9月, 2015 3 次提交
-
-
由 Michal Privoznik 提交于
So while working on my previous patches, I've noticed that virDomainRestore implementation in qemu and test drivers has the same problem as I am fixing. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=871452 So, you want to create a domain from XML. The domain already exists in libvirt's database of domains. It's okay, because name and UUID matches. However, on domain startup, internal representation of the domain is overwritten with your XML even though we claim that the XML you've provided is a transient one. The bug is to be found across nearly all the drivers. Le sigh. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=871452 Okay, so we allow users to 'virsh create' an already existing domain, providing completely different XML than the one stored in Libvirt. Well, as long as name and UUID matches. However, in some drivers the code that handles errors unconditionally removes the domain that failed to start even though the domain might have been persistent. Fortunately, the domain is removed just from the internal list of domains and the config file is kept around. Steps to reproduce: 1) virsh dumpxml $dom > /tmp/dom.xml 2) change XML so that it is still parse-able but won't boot, e.g. change guest agent path to /foo/bar 3) virsh create /tmp/dom.xml 4) virsh dumpxml $dom 5) Observe "No such domain" error Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 9月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
The name of the variable was misleading. Rename it and it's setting accessor before other fixes.
-