- 16 4月, 2013 13 次提交
-
-
由 Daniel P. Berrange 提交于
Some aspects of the cgroups setup / detection code are quite subtle and easy to break. It would greatly benefit from unit testing, but this is difficult because the test suite won't have privileges to play around with cgroups. The solution is to use monkey patching via LD_PRELOAD to override the fopen, open, mkdir, access functions to redirect access of cgroups files to some magic stubs in the test suite. Using this we provide custom content for the /proc/cgroup and /proc/self/mounts files which report a fixed cgroup setup. We then override open/mkdir/access so that access to the cgroups filesystem gets redirected into files in a temporary directory tree in the test suite build dir. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Rename all the virCgroupForXXX methods to use the form virCgroupNewXXX since they are all constructors. Also make sure the output parameter is the last one in the list, and annotate all pointers as non-null. Fix up all callers, and make sure they use true/false not 0/1 for the boolean parameters Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The definition of structs for cgroups are kept in vircgroup.c since they are intended to be private from users of the API. To enable effective testing, however, they need to be accessible. To address the latter issue, without compronmising the former, this introduces a new vircgrouppriv.h file to hold the struct definitions. To prevent other files including this private header, it requires that __VIR_CGROUP_ALLOW_INCLUDE_PRIV_H__ be defined before inclusion Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Instead of calling virCgroupForDomain every time we need the virCgrouPtr instance, just do it once at Vm startup and cache a reference to the object in virLXCDomainObjPrivatePtr until shutdown of the VM. Removing the virCgroupPtr from the LXC driver state also means we don't have stale mount info, if someone mounts the cgroups filesystem after libvirtd has been started Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Instead of calling virCgroupForDomain every time we need the virCgrouPtr instance, just do it once at Vm startup and cache a reference to the object in qemuDomainObjPrivatePtr until shutdown of the VM. Removing the virCgroupPtr from the QEMU driver state also means we don't have stale mount info, if someone mounts the cgroups filesystem after libvirtd has been started Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The virCgroupForDriver method recently gained an 'int controllers' parameter, but the stub impl did not Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Introduce a method virFileDeleteTree for recursively deleting an entire directory tree Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Only compile storagevolxml2argvtest if WITH_STORAGE is set, because it links to that driver Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
On Win32 symlink() is not available, so virstoragetest.c must be conditionalized to avoid compile failures. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The second param of virNetlinkCommand should be struct nlmsghdr, not unsigned char. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Win32 does not like undefined symbols, so define an empty virThreadCancel impl. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
On win32, all code is position independent and adding -fPIE to the compiler flags results in warnings being printed Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Eric Blake 提交于
Upstream gnulib determined that we were needlessly compiling in gnulib's regex instead of glibc's when targetting new-enough glibc, because the m4 test was being too strict in requiring a particular answer to undefined behavior. https://lists.gnu.org/archive/html/bug-gnulib/2013-04/msg00032.html * .gnulib: Update to latest, for regex.
-
- 15 4月, 2013 4 次提交
-
-
由 Osier Yang 提交于
Though they are the same thing, mixed use of them is uncomfortable. "unsigned" is used a lot in old codes, this just tries to change the ones in utils.
-
由 Daniel P. Berrange 提交于
If libvirt makes any gcry_control() calls, then this prevents gnutls for doing any initialization. As such we must take care to do full initialization of libcrypt on a par with what gnutls would have done. In particular we must disable "sec mem" for cases where the user does not have mlock() permission. We also skip our init of libgcrypt if something else (ie the app using libvirt) has beaten us to it. https://bugzilla.redhat.com/show_bug.cgi?id=951630Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Peter Krempa 提交于
Report the errors as: Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141' (crashtest) instead of: Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141'
-
由 Peter Krempa 提交于
Use the helper to lookup the domain object in the remaining places. This patch also fixes error reporting when the domain was not found in several functions that were printing the raw UUID buffer instead of the formatted string. The offending functions were: qemuDomainGetInterfaceParameters qemuDomainSetInterfaceParameters qemuGetSchedulerParametersFlags qemuSetSchedulerParametersFlags qemuDomainGetNumaParameters qemuDomainSetNumaParameters qemuDomainGetMemoryParameters qemuDomainSetMemoryParameters qemuDomainGetBlkioParameters qemuDomainSetBlkioParameters qemuDomainGetCPUStats
-
- 13 4月, 2013 16 次提交
-
-
由 Osier Yang 提交于
Pushed under trivial rule
-
由 Osier Yang 提交于
-
由 Osier Yang 提交于
-
由 Osier Yang 提交于
-
由 Osier Yang 提交于
-
由 Stefan Berger 提交于
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
For TPM passthrough device support create command line parameters like: -tpmdev passthrough,id=tpm-tpm0,path=/dev/tpm0,cancel-path=/sys/class/misc/tpm0/device/cancel -device tpm-tis,tpmdev=tpm-tpm0,id=tpm0 Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Some refactoring for virDomainChrSourceDef type of devices so we can use common code. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
When a VM with a TPM passthrough device is started, the audit daemon logs the following type of message: type=VIRT_RESOURCE msg=audit(1365170222.460:3378): pid=16382 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm resrc=dev reason=start vm="TPM-PT" uuid=a4d7cd22-da89-3094-6212-079a48a309a1 device="/dev/tpm0" exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=success' Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Parse the domain XML with TPM passthrough support. The TPM passthrough XML may look like this: <tpm model='tpm-tis'> <backend type='passthrough'> <device path='/dev/tpm0'/> </backend> </tpm> Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Implement helper function to create the TPM's sysfs cancel file. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Supported TPM passthrough XML may look as follows: <tpm model='tpm-tis'> <backend type='passthrough'> <device path='/dev/tpm0'/> </backend> </tpm> Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Probe for QEMU's QMP TPM support by querying the lists of supported TPM models (query-tpm-models) and backend types (query-tpm-types). The setting of the capability flags following the strings returned from the commands above is only provided in the patch where domain_conf.c gets TPM support due to dependencies on functions only introduced there. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
- 12 4月, 2013 6 次提交
-
-
由 Peter Krempa 提交于
This patch adds the ability to configure non-contiguous boot orders on boot devices. This allows unplugging devices that have boot order specified without breaking migration. The new code now uses a slightly less memory efficient approach to store the boot order fields in a hashtable instead of a bitmap.
-
由 Daniel P. Berrange 提交于
Typically when you get EOF on a stream, poll will return POLLIN|POLLHUP at the same time. Thus when we deal with stream reads, if we see EOF during the read, we can then clear the VIR_STREAM_EVENT_HANGUP & VIR_STREAM_EVENT_ERROR event bits. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Li Zhang 提交于
To avoid the collision for creating USB controllers in machine->init() and -device xx command line, it needs to set usb=off to avoid one USB controller created in machine->init(). So that libvirt can use -device or -usb to create USB controller sucessfully. So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU v1.3.0 onwards which supports USB option. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
-
由 John Ferlan 提交于
-
由 John Ferlan 提交于
-
由 Jiri Denemark 提交于
When migrating a domain with disk images stored locally (and using storage migration), we should not complain about unsafe migration no matter what cache policy is used for that disk.
-
- 11 4月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Explicitly state that using incomplete XML definition snippets for hot-management commands may have unexpected results due to autogenerating values for some of the fields if they aren't specified explicitly.
-