Move function into qemu_domain.c.

Move qemuDomainSupportsNicdev and qemuDomainSupportsNetdev into qemu_domain.c
and expose from there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

GIC is always available to ARM virt machines, and the domain XML should
reflect this fact.

When a domain is configured to use GIC but no version has been
specified by the user, default to GIC v2.

Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.

Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.

Narrowed down the list of #include's in the split out module to
those that are necessary for build.

Some callers will need to behave differently when the detection failed
and when the VM crashed during the redetection. Return -2 if it crashed.

The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Free the old vcpupids array in case when this function is called again
during the run of the VM. It will be later reused in the vCPU hotplug
code. The function now returns the number of detected VCPUs.

Future patches will tweak and reuse the function in different places so
move it separately first.

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.

While this is no functional change, whole channel definition is
going to be needed very soon. Moreover, while touching this obey
const correctness rule in qemuAgentOpen() - so far it was passed
regular pointer to channel config even though the function is
expected to not change pointee at all. Pass const pointer
instead.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Earlier commit 71408079 forgot to deal
properly with status XMLs where we want the libvirt-internal paths to be
kept in place and not cleared, otherwise we could end up copying a NULL
string and segfaulting th daemon.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This way both Domain and Device PostParse functions can act based on the
flags.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We weren't checking for failure of qemuCaps lookup

Rather than open coding calls. I can't see any reason not to

Rather than open coding calls. I can't see any reason not to

Should be a no-op

memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It was added by mistake before the 'If' by commit 71408079.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML.  Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start.  So let's forget about old generated paths
and also stop putting them into the persistent definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1278068Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

MemLock is already used in other modules and, while still an
abbreviation, is not ambiguous.

When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.

When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.

This function detects whether a domain needs RLIMIT_MEMLOCK
to be set, and if so, uses an appropriate value.

Instead of directly accessing the array add a helper to do this.

Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.

We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d82
and 65686e5a this was removed.

As in commit 88dc7e0c, the helper can be used in cases where the
function actually does not access anyting in the private data besides
the agent.

The current virtlogd RPC protocol provides the ability to
handle log files associated with QEMU stdout/err. The log
protocol messages take the virt driver, domain name and
use that to form a log file path. This is quite restrictive
as it prevents us re-using the same RPC protocol messages
for logging to char device backends where the filename
can be arbitrarily user specified. It is also bad because
it means we have 2 separate locations which have to decide
on logfile name.

This change alters the RPC protocol so that we pass the
desired log file path along when opening the log file
initially. Now the virt driver is exclusively in charge
of deciding the log filename
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemuDomainLogContextNew method leaks the "logfile" path
on the non-virtlogd code path.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576

Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.

This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the QEMU monitor is given an FD to the logfile. This
won't work in the future with virtlogd, so it needs to use the
qemuDomainLogContextPtr instead, but it shouldn't directly
access that object either. So define a callback that the
monitor can use for reporting errors from the log file.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemuDomainTaint APIs currently expect to be passed a log file
descriptor. Change them to instead use a qemuDomainLogContextPtr
to hide the implementation details.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the places which create/open log files to use the new
qemuDomainLogContextPtr object instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a qemuDomainLogContext object to encapsulate
handling of I/O to/from the domain log file. This will
hide details of the log file implementation from the
rest of the driver, making it easier to introduce
support for virtlogd later.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are two pretty similar functions qemuProcessReadLog and
qemuProcessReadChildErrors. Both read from the QEMU log file
and try to strip out libvirt messages. The latter then reports
an error, while the former lets the callers report an error.

Re-write qemuProcessReadLog so that it uses a single read
into a dynamically allocated buffer. Then introduce a new
qemuProcessReportLogError that calls qemuProcessReadLog
and reports an error.

Convert all callers to use qemuProcessReportLogError.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.