Power 8 platform's basic hotpluggable unit is a core rather than a
thread for x86_64 family. This introduces most of the complexity of the
matching code and thus needs to be tested.

The test data contain data captured from in-order cpu hotplug and
unplug operations.

During review it was reported that adding at least 11 vcpus creates a
collision of prefixes in the monitor matching algorithm. Add a test case
to verify that the problem won't happen.

As the combination algorithm is rather complex and ugly it's necessary
to make sure it works properly. Add test suite infrastructure for
testing it along with a basic test based on x86_64 platform.

For hotplug purposes it's necessary to retrieve data using
query-hotpluggable-cpus while the old query-cpus API report thread IDs
and order of hotplug.

This patch adds code that merges the data using a rather non-trivial
algorithm and fills the data to the qemuMonitorCPUInfo structure for
adding to appropriate place in the domain definition.

Add support for retrieving information regarding hotpluggable cpu units
supported by qemu. Data returned by the command carries information
needed to figure out the granularity of hotplug, the necessary cpu type
name and the topology information.

Note that qemu doesn't specify any particular order of the entries thus
it's necessary sort them by socket_id, core_id and thread_id to the
order libvirt expects.

To allow matching up the data returned by query-cpus to entries in the
query-hotpluggable-cpus reply for CPU hotplug it's necessary to extract
the QOM path as it's the only link between the two.

QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.

When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.

As of qemu commit:
commit a32ef3bfc12c8d0588f43f74dcc5280885bbdb30
Author: Thomas Huth <thuth@redhat.com>
Date:   Wed Jul 22 15:59:50 2015 +0200

    vl: Add another sanity check to smp_parse() function

v2.4.0-952-ga32ef3b

configuration where the maximum CPU count doesn't match the topology is
rejected. Prior to that only configurations where the topology would
contain more cpus than the maximum count would be rejected.

Use QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as a relevant recent enough
witness to avoid breaking old configs.

Prepare to extract more data by returning an array of structs rather than
just an array of thread ids. Additionally report fatal errors separately
from qemu not being able to produce data.

The function will gradually add more returned data. Return a struct for
every vCPU containing the data.

s/failed/failed to
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

If virBufferError() reports an error, then vshError() is needed to
report the error situation instead of a simple vshError().

Use the full versions of the message, instead of composing a base
message with what was updated; the change makes the messages properly
translatable, since different parts of a sentence might need different
declensions for example.

Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.

Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179

Commit 0adc9d26 broke the build since
remote_protocol-structs was not updated.

  vzDomainMigrateConfirm3Params is whitelisted. Otherwise we need to
move removing domain from domain list from perform to confirm
step. This would further imply adding a flag and check that migration
is in progress to prohibit mistakenly (maliciously) removing domains
on confirm step. vz version of p2p also need to be fixed to include confirm step.
One would also need to add means to cleanup pending migration
on client disconnect as now is has state across several API
calls.

  On the other hand current version of confirm step is totaly
harmless thus it is easier to whitelist it at the moment.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

This way we make naming consistent to API calls and make subsequent
ACL checks possible (otherwise ACL check would discover name
discrepancies).
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

  ACL check on perform step should be in API call itself to make ACL
checking script pass. Thus we need to reorganize code to obtain
domain object in perform API itself. Most of this is straight
forward, the only nuance is dropping locks on lengthy remote
operations.
  The other motivation is to have only perform step ACL checks for
p2p migration instead of both begin in perform if we can leave
ACL check in vzDomainMigratePerformStep.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

We need it to prepare the calls for ACL checks otherwise ACL checking
script will fail.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

This action deserves its own function and makes main API call
structure much cleaner.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Now we can use intended ACL check for both API calls.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

  The original motivation is to expand API calls like start/stop etc so that
the ACL checks could be added. But this patch has its own befenits.

1. functions like prlsdkStart/Stop use common routine to wait for
job without domain lock. They become more self contained and do
not return intermediate PRL_RESULT.

2. vzDomainManagedSave do not update cache twice.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Commit id '0b6336c2' formatted the 'addr', but didn't VIR_FREE it.

Found by Coverity.

remove the dead code this patch is to remove the dead code Signed-off-by: JieWang <wangjie88@huawei.com>
Signed-off-by: NJieWang <wangjie88@huawei.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1367259

Crash occurs because 'secrets' is being dereferenced in call:

        if (qemuDomainSecretSetup(conn, priv, secinfo, disk->info.alias,
                                  VIR_SECRET_USAGE_TYPE_VOLUME, NULL,
                                  &src->encryption->secrets[0]->seclookupdef,
                                  true) < 0)

(gdb) p *src->encryption
$1 = {format = 2, nsecrets = 0, secrets = 0x0, encinfo = {cipher_size = 0,
    cipher_name = 0x0, cipher_mode = 0x0, cipher_hash = 0x0, ivgen_name = 0x0,
    ivgen_hash = 0x0}}
(gdb) bt
    priv=priv@entry=0x7fffc03be160, disk=disk@entry=0x7fffb4002ae0)
    at qemu/qemu_domain.c:1087
    disk=0x7fffb4002ae0, vm=0x7fffc03a2580, driver=0x7fffc02ca390,
    conn=0x7fffb00009a0) at qemu/qemu_hotplug.c:355

Upon entry to qemuDomainAttachVirtioDiskDevice, src->encryption points
at a valid 'secret' buffer w/ nsecrets == 1; however, the call to
qemuDomainDetermineDiskChain will call virStorageFileGetMetadata
and eventually virStorageFileGetMetadataInternal where the src->encryption
was overwritten when probing the volume.

Commit id 'a48c7141' added code to virStorageFileGetMetadataInternal
to determine if the disk/volume would use/need encryption and allocated
a meta->encryption. This overwrote an existing encryption buffer
already provided by the XML

This patch adds a check for meta->encryption already present before
just allocating and overwriting an existing buffer. It then checks the
existing encryption data to ensure the XML provided format for the
disk matches the expected format read from the disk and errors if there
is a mismatch.

For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:

   <forwarder addr='192.168.123.25'/>

This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:

   <forwarder domain='example.com' addr='192.168.1.1'/>
   <forwarder domain='www.example.com'/>
   <forwarder domain='travesty.org' addr='10.0.0.1'/>

would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796

If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.

This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:

   <dns enable='no'/>

to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).

The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810

==18324== 32 bytes in 1 blocks are still reachable in loss record 41 of 114
==18324==    at 0x4C2C070: calloc (vg_replace_malloc.c:623)
==18324==    by 0x4EA479B: virAlloc (viralloc.c:144)
==18324==    by 0x4EA674A: virBitmapNewQuiet (virbitmap.c:77)
==18324==    by 0x4EA67F7: virBitmapNew (virbitmap.c:106)
==18324==    by 0x4EC777D: dnsmasqCapsNewEmpty (virdnsmasq.c:801)
==18324==    by 0x4EC781B: dnsmasqCapsNewFromBuffer (virdnsmasq.c:815)
==18324==    by 0x407CF4: mymain (networkxml2conftest.c:99)
==18324==    by 0x409CF0: virTestMain (testutils.c:982)
==18324==    by 0x4080EA: main (networkxml2conftest.c:136)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch fixes a bug which occurs when we check a bus and unit number
for a new attached disk. We should do this check in ValidadionCallback,
not in PostParse callback. Because in PostParse we have not initialized
disk->info.addr.drive struct yet.
Move part of code from domainPostParseCallback to domainValidateCallback
and part from devicesPostParseCallback to deviceValidateCallback.
PostParse callbacks are for modification data.
ValidateCallbacks are only for checks.

While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Somehow we lost this during recent refactoring
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

If we are going to ignore return value of a functions
that can raise an error, it's not enough to use ignore_value
construction. We should explicitly call virResetLastError
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

First, make function logPrlEventErrorHelper be void and only
print information (if any) from an event.
Second, don't rewrite original error with any errors we get
during parsing event info.
Third, ignore PRL_ERR_NO_DATA at all.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

The marginally nicer error message is not worth the extra lines in
cfg.mk.

Also drop the excludes since there was only one offender in the tests.

Both gethostbyaddr and gethostbyname* are already checked
by sc_prohibit_nonreentrant.