Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in virLXCDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the LXC driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds cpuset cgroup support for LXC.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Currently the LXC controller creates the cgroup, configures the
resources and adds the task all in one go. This is not sufficiently
flexible for the forthcoming NBD integration. We need to make sure
the NBD process gets into the right cgroup immediately, but we can
not have limits (in particular the device ACL) applied at the point
where we start qemu-nbd. So create a virLXCCgroupCreate method
which creates the cgroup and adds the current task to be called
early, and leave virLXCCgroupSetup to only do resource config.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the usbDeviceXXX and usbXXXDevice APIs to have a
fixed virUSBDevice name prefix

This adds support for host device passthrough with the
LXC driver. Since there is only a single kernel image,
it doesn't make sense to pass through PCI devices, but
USB devices are fine. For the latter we merely need to
make the /dev/bus/usb/NNN/MMM character device exist
in the container's /dev
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

with this patch,container's meminfo will be shown based on
containers' mem cgroup.

Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.

if I miss something, please let me know.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Move the cgroup setup code out of the lxc_controller.c file
and into lxc_cgroup.{c,h}. This reduces the size of the
lxc_controller.c file and paves the way to invoke cgroup
setup from lxc_driver.c instead of lxc_controller.c in the
future
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

* src/lxc_conf.c, src/lxc_conf.h, src/lxc_container.c,
  src/lxc_container.h, src/lxc_controller.c, src/lxc_driver.c,
  src/lxc_driver.h, src/veth.c, src/veth.h: Move to src/lxc/
* src/opennebula/one_driver.c: Remove bogus veth.h include
* src/Makefile.am: Adjust for lxc paths
* daemon/qemud.c: Adjust include for lxc

Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'

* configure.in include/libvirt/virterror.h src/Makefile.am
  src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
  Applied 3 patches from Dave Leskovec for intial support of
  Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel

Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.

	* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h,
	  src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more
	  of qemu if configured --without-qemu.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel

  src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h:
  applied patch from Richard Jones adding check to printf-like
  functions and fixing the problems raised
Daniel

        * qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
        requests and replies to the protocol.

        * src/qemu_internal.c: hookup the qemu driver autostart
        methods

        * qemud/dispatch.c, qemud/driver.[ch], internal.h: add
        the daemon side, but just set an in-memory autostart
        flag for now.

        * qemud/driver.[ch], qemud/dispatch.c: fix the fact that
        qemudDispatchDomainStart() doesn't report an error if the uuid
        lookup fails and also move the uuid lookup into the driver
        so that it matches the way we do Destroy().

        * include/libvirt/libvirt.h.in, src/libvirt.c: add
        virNetworkGetBridgeName() to allow finding out what
        bridge to connect to in order to join a network.

        * src/driver.h: add networkGetBridgeName() to vtable.

        * qemud/protocol.h: add the request and reply to
        the qemud protocol.

        * qemud/dispatch.c, qemud/driver.[ch]: handle them
        here.

        * src/qemu_internal.c: implement GetBridgeName()
        in the qemu driver.

        * src/libvirt_sym.version: add new symbol.

        * qemud/protocol.h: add the protocol for virtual networks

        * qemud/dispatch.c: implement the protocol

        * qemud/driver.[ch]: add stubs for the driver

        * qemud/internal.h: add struct qemud_network

        * src/qemu_internal.c: add a virtual networks driver