Currently we check qemuCaps before starting the block job. But qemuCaps
isn't available on a stopped domain, which means we get a misleading
error message in this case:

  # virsh domstate example
  shut off

  # virsh blockjob example vda
  error: unsupported configuration: block jobs not supported with this QEMU binary

Move the qemuCaps check into the block job so that we are guaranteed the
domain is running.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

qemuMigrationCookieAddNBD is usually called from within an async
MIGRATION_OUT or MIGRATION_IN job, so it needs to start a nested job.

(The one exception is during the Begin phase when change protection
isn't enabled, but qemuDomainObjEnterMonitorAsync will behave the same
as qemuDomainObjEnterMonitor in this case.)

This bug was encountered with a libvirt client that repeatedly queries
the disk mirroring block job info during a migration. If one of these
queries occurs just as the Perform migration cookie is baked, libvirt
crashes.

Relevant logs are as follows:

    6701: warning : qemuDomainObjEnterMonitorInternal:1544 : This thread seems to be the async job owner; entering monitor without asking for a nested job is dangerous
[1] 6701: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block","id":"libvirt-629"}
[2] 6699: info : qemuMonitorIOWrite:503 : QEMU_MONITOR_IO_WRITE: mon=0x7fefdc004700 buf={"execute":"query-block","id":"libvirt-629"}
[3] 6704: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block-jobs","id":"libvirt-630"}
[4] 6699: info : qemuMonitorJSONIOProcessLine:203 : QEMU_MONITOR_RECV_REPLY: mon=0x7fefdc004700 reply={"return": [...], "id": "libvirt-629"}
    6699: error : qemuMonitorJSONIOProcessLine:211 : internal error: Unexpected JSON reply '{"return": [...], "id": "libvirt-629"}'

At [1] qemuMonitorBlockStatsUpdateCapacity sends its request, then waits
on mon->notify. At [2] the request is written out to the monitor socket.
At [3] qemuMonitorBlockJobInfo sends its request, and also waits on
mon->notify. The reply from the first request is received at [4].
However, qemuMonitorJSONIOProcessLine is not expecting this reply since
the second request hadn't completed sending. The reply is dropped and an
error is returned.

qemuMonitorIO signals mon->notify twice during its error handling,
waking up both of the threads waiting on it. One of them clears mon->msg
as it exits qemuMonitorSend; the other crashes:

  qemuMonitorSend (mon=0x7fefdc004700, msg=<value optimized out>) at qemu/qemu_monitor.c:975
  975         while (!mon->msg->finished) {
  (gdb) print mon->msg
  $1 = (qemuMonitorMessagePtr) 0x0
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

In order to change an existing domain we delete all existing devices and add
new from scratch. In case of network devices we should also delete corresponding
virtual networks (if any) before removing actual devices from xml. In the patch,
we do it by extending prlsdkDoApplyConfig with a new parameter, which stands for
old xml, and calling prlsdkDelNet every time old xml is specified.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The close callbacks hash are keyed by a UUID-string, but
virCloseCallbacksRun was attempting to remove them by raw UUID. This
patch ensures the callback entries are removed by UUID-string as well.

This bug caused problems when guest migrations were abnormally aborted:

  # timeout --signal KILL 1 \
      virsh migrate example qemu+tls://remote/system \
        --verbose --compressed --live --auto-converge \
        --abort-on-error --unsafe --persistent \
        --undefinesource --copy-storage-all --xml example.xml
  Killed

  # virsh migrate example qemu+tls://remote/system \
      --verbose --compressed --live --auto-converge \
      --abort-on-error --unsafe --persistent \
      --undefinesource --copy-storage-all --xml example.xml
  error: Requested operation is not valid: domain 'example' is not being migrated
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

If a VM migration is aborted, a disk mirror may be failed by QEMU before
libvirt has a chance to cancel it. The disk->mirrorState remains at
_ABORT in this case, and this breaks subsequent mirrorings of that disk.

We should instead check the mirrorState directly and transition to _NONE
if it is already aborted. Do the check *after* aborting the block job in
QEMU to avoid a race.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

If virCloseCallbacksSet fails, qemuMigrationBegin must return NULL to
indicate an error occurred.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

The destination libvirt daemon in a migration may segfault if the client
disconnects immediately after the migration has begun:

  # virsh -c qemu+tls://remote/system list --all
   Id    Name                           State
  ----------------------------------------------------
  ...

  # timeout --signal KILL 1 \
      virsh migrate example qemu+tls://remote/system \
        --verbose --compressed --live --auto-converge \
        --abort-on-error --unsafe --persistent \
        --undefinesource --copy-storage-all --xml example.xml
  Killed

  # virsh -c qemu+tls://remote/system list --all
  error: failed to connect to the hypervisor
  error: unable to connect to server at 'remote:16514': Connection refused

The crash is in:

   1531 void
   1532 qemuDomainObjEndJob(virQEMUDriverPtr driver, virDomainObjPtr obj)
   1533 {
   1534     qemuDomainObjPrivatePtr priv = obj->privateData;
   1535     qemuDomainJob job = priv->job.active;
   1536
   1537     priv->jobs_queued--;

Backtrace:

  #0  at qemuDomainObjEndJob at qemu/qemu_domain.c:1537
  #1  in qemuDomainRemoveInactive at qemu/qemu_domain.c:2497
  #2  in qemuProcessAutoDestroy at qemu/qemu_process.c:5646
  #3  in virCloseCallbacksRun at util/virclosecallbacks.c:350
  #4  in qemuConnectClose at qemu/qemu_driver.c:1154
  ...

qemuDomainRemoveInactive calls virDomainObjListRemove, which in this
case is holding the last remaining reference to the domain.
qemuDomainRemoveInactive then calls qemuDomainObjEndJob, but the domain
object has been freed and poisoned by then.

This patch bumps the domain's refcount until qemuDomainRemoveInactive
has completed. We also ensure qemuProcessAutoDestroy does not return the
domain to virCloseCallbacksRun to be unlocked in this case. There is
similar logic in bhyveProcessAutoDestroy and lxcProcessAutoDestroy
(which call virDomainObjListRemove directly).
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015==    by 0x5302FD1: virObjectNew (virobject.c:193)
==19015==    by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015==    by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015==    by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015==    by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015==    by 0x53201AD: virThreadHelper (virthread.c:206)
==19015==    by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015==    by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

==19015== 8 bytes in 1 blocks are definitely lost in loss record 34 of 1,049
==19015==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x4C2C32F: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52AD888: virReallocN (viralloc.c:245)
==19015==    by 0x52AD97E: virExpandN (viralloc.c:294)
==19015==    by 0x52ADC51: virInsertElementsN (viralloc.c:436)
==19015==    by 0x5335864: virDomainVirtioSerialAddrSetAddController (domain_addr.c:816)
==19015==    by 0x53358E0: virDomainVirtioSerialAddrSetAddControllers (domain_addr.c:839)
==19015==    by 0x1DD5513B: qemuDomainAssignVirtioSerialAddresses (qemu_command.c:1422)
==19015==    by 0x1DD55A6E: qemuDomainAssignAddresses (qemu_command.c:1711)
==19015==    by 0x1DDA5818: qemuProcessStart (qemu_process.c:4616)
==19015==    by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015==    by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

==19015== 1,064 (656 direct, 408 indirect) bytes in 2 blocks are definitely lost in loss record 1,002 of 1,049
==19015==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52AD74B: virAlloc (viralloc.c:144)
==19015==    by 0x52B47CA: virCgroupNew (vircgroup.c:1057)
==19015==    by 0x52B53E5: virCgroupNewVcpu (vircgroup.c:1451)
==19015==    by 0x1DD85A40: qemuSetupCgroupForVcpu (qemu_cgroup.c:1013)
==19015==    by 0x1DDA66EA: qemuProcessStart (qemu_process.c:4844)
==19015==    by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015==    by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
==19015==    by 0x1DDF1ACD: qemuDomainCreate (qemu_driver.c:7337)
==19015==    by 0x53F87EA: virDomainCreate (libvirt-domain.c:6820)
==19015==    by 0x12690A: remoteDispatchDomainCreate (remote_dispatch.h:3481)
==19015==    by 0x126827: remoteDispatchDomainCreateHelper (remote_dispatch.h:3457)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The 'checkPool' callback was originally part of the storageDriverAutostart function,
but the pools need to be checked earlier during initialization phase,
otherwise we can't start a domain which mounts a volume after the
libvirtd daemon restarted. This is because qemuProcessReconnect is called
earlier than storageDriverAutostart. Therefore the 'checkPool' logic has been
moved to storagePoolUpdateAllState which is called inside storageDriverInitialize.

We also need a valid 'conn' reference to be able to execute 'refreshPool'
during initialization phase. Though it isn't available until storageDriverAutostart
all of our storage backends do ignore 'conn' pointer, except for RBD,
but RBD doesn't support 'checkPool' callback, so it's safe to pass
conn = NULL in this case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177733

These functions operate exactly the same as their network equivalents
virNetworkLoadAllState, virNetworkLoadState.

This patch introduces new virStorageDriverState element stateDir.
Also adds necessary changes to storageStateInitialize, so that
directories initialization becomes more generic.

The nodedev-detach can report the name of the domain using the device
just the way nodedev-reattach does it.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media

Change the message to:

  Successfully {inserted,ejected,changed} media.

https://bugzilla.redhat.com/show_bug.cgi?id=967946

An upcoming netcf release will support multiple ipv4 addresses, so
let's loosen up libvirt's interface.rng to allow it.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The error output of snapshot-revert should be more friendly.
There is no need to show virDomainRevertToSnapshot to user.
virReportError already includes __FUNCTION__ information in a
separate member of the struct, so repeating it in the message is
redundant and leads to situations where higher level code ends up
reporting the lower level name. We correctly converted the error
output making it more succinct and user-friendly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1086726

In virsh we have two printing functions: vshPrint() which prints a
string onto stdout and vshPrintExtra() which does not print anything
if virsh is run in quiet mode. Usually, the former is used to print
actual results, while the latter to print strings like table headers
and other formatting stuff. However, in cmdDomIfAddr we have
mistakenly used vshPrintExtra even for actual data. After this patch,
the output should look like the following:

  # virsh -q domifaddr test3 --source agent
  lo         00:00:00:00:00:00    ipv4         127.0.0.1/8
  -          -                    ipv6         ::1/128
  ens8       52:54:00:1a:cb:3f    ipv6         fe80::5054:ff:fe1a:cb3f/64
  virbr0     52:54:00:db:51:e7    ipv4         192.168.122.1/24
  virbr0-nic 52:54:00:db:51:e7    N/A          N/A
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Before this patch, when connected via vCenter, the free memory returned
was from the resorcePool (usually a cluster). This is in conflict with
e.g esxNodeGetInfo which always pulls info from the ESX host.
Since libvirt ESX driver works primarily with ESX hosts, this patch
changes esxNodeGetFreeMemory to pull that information from ESX host so
it's consistent with behavior of esxNodeGetInfo.

Modeled after the already existing esxVI_GetLong.

Just a minor change which might be a little confusing for someone
looking only at the API.

Introduce virStoragePoolSaveState to properly format the state XML in
the same manner as virStoragePoolDefFormat, except for adding a
<poolstate> ... </poolstate> around the definition. This is similar to
virNetworkObjFormat used to save the live/active network information.

When modifying config/status XML, it might be handy to include some
additional XML elements (e.g. <poolstate>). In order to do so,
introduce new formatting function virStoragePoolDefFormatBuf and make
virStoragePoolDefFormat call it.

Recent testing on large memory systems revealed a bug in the Xen xl
tool's freemem() function.  When autoballooning is enabled, freemem()
is used to ensure enough memory is available to start a domain,
ballooning dom0 if necessary.  When ballooning large amounts of memory
from dom0, freemem() would exceed its self-imposed wait time and
return an error.  Meanwhile, dom0 continued to balloon.  Starting the
domain later, after sufficient memory was ballooned from dom0, would
succeed.  The libvirt implementation in libxlDomainFreeMem() suffers
the same bug since it is modeled after freemem().

In the end, the best place to fix the bug on the Xen side was to
slightly change the behavior of libxl_wait_for_memory_target().
Instead of failing after caller-provided wait_sec, the function now
blocks as long as dom0 memory ballooning is progressing.  It will return
failure only when more memory is needed to reach the target and wait_sec
have expired with no progress being made.  See xen.git commit fd3aa246.
There was a dicussion on how this would affect other libxl apps like
libvirt

http://lists.xen.org/archives/html/xen-devel/2015-03/msg00739.html

If libvirt containing this patch was build against a Xen containing
the old libxl_wait_for_memory_target() behavior, libxlDomainFreeMem()
will fail after 30 sec and domain creation will be terminated.
Without this patch and with old libxl_wait_for_memory_target() behavior,
libxlDomainFreeMem() does not succeed after 30 sec, but returns success
anyway.  Domain creation continues resulting in all sorts of fun stuff
like cpu soft lockups in the guest OS.  It was decided to properly fix
libxl_wait_for_memory_target(), and if anything improve the default
behavior of apps using the freemem reference impl in xl.

xl was patched to accommodate the change in libxl_wait_for_memory_target()
with xen.git commit 883b30a0.  This patch does the same in the libxl
driver.  While at it, I changed the logic to essentially match
freemem() in $xensrc/tools/libxl/xl_cmdimpl.c.  It was a bit cleaner
IMO and will make it easier to spot future, potentially interesting
divergences.

Dependant is flagged as wrong in US dictionary (only valid in UK
dictionary, and even then, it has only the financial sense and not the
inter-relatedness sense that we are more prone to be wanting throughout
code).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Reported-by: NPeter Phaal <peter.phaal@gmail.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

'virPCIDeviceList' is actually an array. Removing one element makes the
rest of the element move.

Use while loop, increase index only when not virPCIDeviceListDel(pcidevs, dev)
Signed-off-by: NHuanle Han <hanxueluo@gmail.com>

Commit cd5dc303 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:

6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt:  error : unsupported configuration: multiple USB
devices not supported
FAILED

In virDomainVirtioSerialAddrNext, add another controller
if we've exhausted all ports of the existing controllers.

https://bugzilla.redhat.com/show_bug.cgi?id=1076708

Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.

Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).

Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606
https://bugzilla.redhat.com/show_bug.cgi?id=1076708

Test changes:
* virtio-auto.args
  Filling out the port when just the controller is specified.
  switched from using
    maxport + 1
  to:
    first free port on the controller
* virtio-autoassign.args
  Filling out the address when no <address> is specified.
  Started using all the controllers instead of 0, also discards
  the bus value.
* xml -> xml output of virtio-auto
  The port assignment is no longer done as a part of XML parsing,
  so the unspecified values stay 0.

Create a sorted array of virtio-serial controllers.
Each of the elements contains the controller index
and a bitmap of available ports.

Buses are not tracked, because they aren't supported by QEMU.

Add a test to demonstrate the effect of automatic virtio-serial
address assignment.

Seems to be a remnant that was never cleaned up from original submit...
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the call to virStorageBackendISCSIGetHostNumber failed, we set
retval = -1, but yet still called virStorageBackendSCSIFindLUs.
Need to add a goto cleanup - while at it, adjust the logic to
initialize retval to -1 and only changed to 0 (zero) on success.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Don't supercede the error message virStorageBackendSCSIFindLUs as the
message such as "error: Failed to find LUs on host 60: ..." is not overly
clear as to what the real problem might be.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Make XML definition saving more generic by moving the common code into
virStoragePoolSaveXML and leave case specific code to
PoolSave{Status,Config,...} functions.

In order to be able to use 'checkPool' inside functions which do not
have any connection reference, 'conn' attribute needs to be discarded
from the checkPool's signature, since it's not used by any storage backend
anyway.