Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

In a following case:

    virsh start $domain
    service libvirtd stop
    <shutdown> the guest from within the $domain
    service libvirtd start

Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:

    libvirtd start
        qemuProcessReconnect
            qemuProcessStop (because $domain was shutdown without
                             libvirtd event to process that)
                qemuHostdevReAttachDomainDevices
                    qemuHostdevReAttachPCIDevices
                        virHostdevReAttachPCIDevices

However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.

This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: NWu Zongyong <cordius.wu@huawei.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.

The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.

This commit is best viewed with 'git show -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

A bunch of SCSI test cases in qemuxml2argv used

  DO_TEST(...
          QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
          ...);

instead of the intended

  DO_TEST(...
          QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
          ...);

which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

We already prefer them in capabilities, and domcapabilities
should be consistent with that.

This commit is best viewed with 'git show -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The new implementation contains less duplicated code and
is easier to extend.

This commit is best viewed with 'git show -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The latter is used throughout libvirt, so use it here as
well for consistency.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.

This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.

This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.

Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.

Doing so will also make further refactoring easier.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.

The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as

  <emulator>/usr/bin/qemu-system-x86_64</emulator>
  <domain type='qemu'/>
  <domain type='kvm'>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
  </domain>

with the second <emulator> element providing no additional
information.

Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The function performing the checks, rather than its callers,
should contain comments explaining the rationale behind said
checks.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1630164

The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1630164

Since 2a13a0a1 we are querying the vhostuser's interface name
when building qemu command line. However, we forgot to do so on
hotplug.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The `if(!list || list->type != VIR_CONF_LIST)` check couldn't be
written in a 100% similar way. Instead, we're just checking whether
`virConfGetValueStringList() <= 0` and creating a new function to:
- return -1 in case virConfGetValueStringList fails either due to some
  allocation failure or when traversing the list;
- resetting the last error and return 0 otherwise;

Taking this approach we can have the behaviour with the new code as
close as possible to the old one.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This change actually changes the behaviour of xenConfigGetString() as
now it returns a newly-allocated string.

Unfortunately, there's not much that can be done in order to avoid that
and all the callers have to be changed in order to avoid leaking the
return value.

Also, as a side-effect of the change above, the function now takes a
"char **" argument instead of a "const char **" one.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

The QEMU binary is compiled from the v3.0.0 tag.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

Commit 12093f1f used %ld instead of %zd for a size_t.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.

The host capability of the two monitors is also introduced
in this patch.

For CMT, the host capability is shown like:
  <host>
  ...
    <cache>
      <bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
        <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
      </bank>
      <monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
        <feature name='llc_occupancy'/>
      </monitor>
    </cache>
    ...
  </host>

For MBM, the capability is shown like this:
  <host>
    ...
    <memory_bandwidth>
      <node id='1' cpus='6-11'>
        <control granularity='10' min ='10' maxAllocs='4'/>
      </node>
      <monitor maxMonitors='176'>
        <feature name='mbm_total_bytes'/>
        <feature name='mbm_local_bytes'/>
      </monitor>
    </memory_bandwidth>
    ...
  </host>
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Move memory bandwidth capability nodes into one data structure,
this allows us to add a monitor for memory bandwidth.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Move all cache banks into one data structure, this allows
us to add other cache component, such as cache monitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch introduces the resource monitor and creates the interface
for getting host capability of resource monitor from the system resource
control file system.

The resource monitor takes the role of RDT monitoring group and could be
used to monitor the resource consumption information, such as the last
level cache occupancy and the utilization of memory bandwidth.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

With the assumption that all Xen >= 4.6 contains a pkgconfig file for
libxenlight, commit 5bdcef13 dropped the fallback check to probe
libxenlight with LIBVIRT_CHECK_LIB. At the time it was not known that
the various Xen pkgconfig files are in the -runtime package in Fedora,
instead of the traditional -devel package. This bug [1] was fixed in
Fedora > 28, but until Fedora 28 reaches EOL we'll need to re-introduce
the fallback check.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1629643Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1614283

Save the error from the refresh failure because the stopPool
processing may overwrite the error or even worse clear it
due to calling an external libvirt API that resets the last
error such as is the case with the SCSI pool which may call
virGetConnectNodeDev (see commit decaeb28) in order to
process deleting an NPIV vport.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Create a common pool refresh failure handling method as the
same code is repeated multiple times.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>