Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In the error path, if we xmlFreeNode @ret, then the return ret;
a few lines later returns something that's already been free'd
and could be reused, so let's reinit it.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Recent changes removed the virCapsPtr, but didn't adjust/remove the
corresponding ATTRIBUTE_NONNULL resulting in a build failure to build
in my Coverity environment.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

None of those are used and we should prefer using the ones provided by
GLib, as G_DIR_SEPARATOR, G_DIR_SEPARATOR_S, G_SEARCHPATH_SEPARATOR, and
G_SEARCHPATH_SEPARATOR_S.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

The define is not used since virFileIsAbsPath() has been dropped.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The function is no longer used since commit faf2d811.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The function is no longer used since commit faf2d811.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This fixes mingw-libvirt RPM build
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Let's just use the plain g_get_home_dir(), from GLib, instead of
maintaining a code adapted from the GLib's one.
Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.

This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.

Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.

qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.

Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Move EGL Headless validation from qemuBuildGraphicsEGLHeadlessCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.

It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

If the host OS doesn't have NUMA present, we fallback to
populating fake NUMA info and the code thus assumes only a
single NUMA node.

Unfortunately we also fallback to fake NUMA if numactl-devel
was not present, and in this case we can still have multiple
NUMA nodes. In this case we create all CPUs, but only the
CPUs in the first node have any data filled in, resulting in
capabilities like:

    <topology>
      <cells num='1'>
        <cell id='0'>
          <memory unit='KiB'>15977572</memory>
          <cpus num='48'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
            <cpu id='2' socket_id='0' core_id='1' siblings='2'/>
            <cpu id='3' socket_id='0' core_id='1' siblings='3'/>
            <cpu id='4' socket_id='0' core_id='2' siblings='4'/>
            <cpu id='5' socket_id='0' core_id='2' siblings='5'/>
            <cpu id='6' socket_id='0' core_id='3' siblings='6'/>
            <cpu id='7' socket_id='0' core_id='3' siblings='7'/>
            <cpu id='8' socket_id='0' core_id='4' siblings='8'/>
            <cpu id='9' socket_id='0' core_id='4' siblings='9'/>
            <cpu id='10' socket_id='0' core_id='5' siblings='10'/>
            <cpu id='11' socket_id='0' core_id='5' siblings='11'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
            <cpu id='0'/>
          </cpus>
        </cell>
      </cells>
    </topology>

With this new code we get something slightly less broken

    <topology>
      <cells num='4'>
        <cell id='0'>
          <memory unit='KiB'>15977572</memory>
          <cpus num='12'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0-1'/>
            <cpu id='1' socket_id='0' core_id='0' siblings='0-1'/>
            <cpu id='2' socket_id='0' core_id='1' siblings='2-3'/>
            <cpu id='3' socket_id='0' core_id='1' siblings='2-3'/>
            <cpu id='4' socket_id='0' core_id='2' siblings='4-5'/>
            <cpu id='5' socket_id='0' core_id='2' siblings='4-5'/>
            <cpu id='6' socket_id='0' core_id='3' siblings='6-7'/>
            <cpu id='7' socket_id='0' core_id='3' siblings='6-7'/>
            <cpu id='8' socket_id='0' core_id='4' siblings='8-9'/>
            <cpu id='9' socket_id='0' core_id='4' siblings='8-9'/>
            <cpu id='10' socket_id='0' core_id='5' siblings='10-11'/>
            <cpu id='11' socket_id='0' core_id='5' siblings='10-11'/>
          </cpus>
        </cell>
        <cell id='0'>
          <memory unit='KiB'>15977572</memory>
          <cpus num='12'>
            <cpu id='12' socket_id='0' core_id='0' siblings='12-13'/>
            <cpu id='13' socket_id='0' core_id='0' siblings='12-13'/>
            <cpu id='14' socket_id='0' core_id='1' siblings='14-15'/>
            <cpu id='15' socket_id='0' core_id='1' siblings='14-15'/>
            <cpu id='16' socket_id='0' core_id='2' siblings='16-17'/>
            <cpu id='17' socket_id='0' core_id='2' siblings='16-17'/>
            <cpu id='18' socket_id='0' core_id='3' siblings='18-19'/>
            <cpu id='19' socket_id='0' core_id='3' siblings='18-19'/>
            <cpu id='20' socket_id='0' core_id='4' siblings='20-21'/>
            <cpu id='21' socket_id='0' core_id='4' siblings='20-21'/>
            <cpu id='22' socket_id='0' core_id='5' siblings='22-23'/>
            <cpu id='23' socket_id='0' core_id='5' siblings='22-23'/>
          </cpus>
        </cell>
      </cells>
    </topology>

The topology at least now reflects what 'virsh nodeinfo' reports.
The main bug is that the CPU "id" values won't match what the Linux
host actually uses.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'caps' object is already allocated when the fake NUMA
initialization takes place.
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The current 'for' loop with 5 consecutive 'ifs' inside
qemuBuildHostdevCommandLine can be a bit smarter:

- all 5 'ifs' fails if hostdev->mode is not equal to
VIR_DOMAIN_HOSTDEV_MODE_SUBSYS. This check can be moved to the
start of the loop, failing to the next element immediately
in case it fails;

- all 5 'ifs' checks for a specific subsys->type to build the proper
command line argument (virHostdevIsSCSIDevice and virHostdevIsMdevDevice
do that but within a helper). Problem is that the code will keep
checking for matches even if one was already found, and there is
no way a hostdev will fit more than one 'if' (i.e. a hostdev can't
have 2+ different types). This means that a SUBSYS_TYPE_USB will
create its command line argument in the first 'if', then all other
conditionals will surely fail but will end up being checked anyway.

All of this can be avoided by moving the hostdev->mode comparing
to the start of the loop and using a switch statement with
subsys->type to execute the proper code for a given hostdev
type.
Suggested-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The code calling this method expects it to have reported an error on
failure.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When freeing qemu driver struct members, we forgot to free
@hostcpu and @hostnuma members.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function is supposed to clean up virQEMUDriver structure and
free individual members. However, it's doing that in random order
which makes it hard to track which members are being freed and
which are not. Do the free in reverse order than the structure
definition - assuming that the most important members (like
mutex) are declared first and freed last.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Fortunately, this is not causing any problems now because glib
does this check for us when calling this function via attribute
cleanup. But in a future commit we will explicitly call this
function over a struct member that might be NULL.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In testXLInitDriver() a dummy driver structure is filled and it
is freed later in testXLFreeDriver(). However, it is sufficient
to unref just driver->config because that results in
libxlDriverConfigDispose() being called which unrefs
driver->config->caps. There is no need to unref it again in
testXLFreeDriver() - in fact it's undesired.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

When generating domain capabilities, we need to fake host CPU to
get reproducible result. We do this by copying a pre-existent CPU
config and setting VIR_TEST_MOCK_FAKE_HOST_CPU env variable which
is then consumed by qemucpumock. However, we forget to free the
CPU copy afterwards.

 2,196 (2,016 direct, 180 indirect) bytes in 18 blocks are definitely lost in loss record 291 of 297
    at 0x4838B86: calloc (vg_replace_malloc.c:762)
    by 0x57CB6A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
    by 0x4A0F72D: virCPUDefNew (cpu_conf.c:87)
    by 0x4A0FAC7: virCPUDefCopyWithoutModel (cpu_conf.c:235)
    by 0x4A0FBBE: virCPUDefCopy (cpu_conf.c:273)
    by 0x10E3C0: testUtilsHostCpusGetDefForArch (testutilshostcpus.h:157)
    by 0x10E3C0: fakeHostCPU (domaincapstest.c:61)
    by 0x10E3C0: fillQemuCaps (domaincapstest.c:86)
    by 0x10E3C0: test_virDomainCapsFormat (domaincapstest.c:234)
    by 0x10F4BC: virTestRun (testutils.c:146)
    by 0x10DE93: doTestQemuInternal (domaincapstest.c:301)
    by 0x10E13D: doTestQemu (domaincapstest.c:332)
    by 0x1124CF: testQemuCapsIterate (testutilsqemu.c:635)
    by 0x10DCE3: mymain (domaincapstest.c:435)
    by 0x10FD8B: virTestMain (testutils.c:916)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Assuming that the backing image format is raw is wrong when doing image
detection:

1) In -drive mode qemu will still probe the image format of the backing
   image. This means it will try to open a backing file of the image
   which will fail if a more advanced security model is in use.

2) In blockdev mode the image will be opened as raw actually which is
   wrong since it might be qcow. Not opening the backing images will
   also end up in the guest seeing corrupted data.

Rather than attempt to solve various corner cases when us assuming the
storage file being raw and actually being right forbid startup when the
guest image doesn't have the format specified in the metadata.

https://bugzilla.redhat.com/show_bug.cgi?id=1588373Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

EXP_WARN and ALLOW_PROBE flags for the testStorageChain cases are no
longer used so we can remove them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Pass in 'true' as '@report_broken' of virStorageFileGetMetadata to make
it fail in the tests. The most important code paths (when starting the
VM) expect this function to fail rather than silently return partial
data. Switch the test to exercise this more important code path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Prior to commit 55ce6564 (first in libvirt 4.6.0), the XML sent to
virDomainAttachDeviceFlags() was parsed only once, and the results of
that parse were inserted into both the live object of the running
domain and into the persistent config. Thus, if MAC address was
omitted from in XML for a network device (<interface>), both the live
and config object would have the same MAC address.

Commit 55ce6564 changed the code to parse the incoming XML twice -
once for live and once for config. This does eliminate the problem of
PCI (/scsi/sata) address conflicts caused by allocating an address
based on existing devices in live object, but then inserting the
result into the config (which may already have a device using that
address), BUT it also means that when the MAC address of a network
device hasn't been specified in the XML, each copy will get a
different auto-generated MAC address.

This results in the MAC address of the device changing the next time
the domain is shutdown and restarted, which creates havoc with the
guest OS's network config.

There have been several discussions about this in the last > 1 year,
attempting to find the ideal solution to this problem that makes MAC
addresses consistent and accounts for all sorts of corner cases with
PCI/scsi/sata addresses. All of these discussions fizzled out because
every proposal was either too difficult to implement or failed to fix
some esoteric case someone thought up.

So, in the interest of solving the MAC address problem while not
making the "other address" situation any worse than before, this patch
simply adds a qemuDomainAttachDeviceLiveAndConfigHomogenize() function
that (for now) copies the MAC address from the config object to the
live object (if the original xml had <mac address='blah'/> then this
will be an effective NOP (as the macs already match)).

Any downstream libvirt containing upstream commit
55ce6564 should have this patch as well.

https://bugzilla.redhat.com/1783411Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The intent of get_nonnull_domain() is not to validate virDomain
as sent by the client but just to construct the virDomain
structure. The validation is then done in each API when looking
up the domain in our internal hash tables.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>